Used Copy Turning for sale (8,252)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm Njdpfxoyaqgyo Ad Nskt - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min Nsdpfeyaqczex Ad Njkt - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Nksdpsyam D Uofx Ad Net Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter: 200 mm, spindle motor power: 11 W, spindle speed (max.): 5,000 rpm, spindle bore: 50 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, chuck outer diameter: 210 mm, bar diameter (max.): 50 mm, We offer this used DMG Gildemeister CTX 310 eco CNC turning and milling center, year 2008. The lathe is in perfect working condition, and various sets of chucks and driven tools are included in the price. Nedpfx Adeyc Nrgj Njkt All original paper manuals are available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck Nksdpfoyc Nnzox Ad Net - Complete documentation Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Nkedpfevxa Tpox Ad Nst Mechanical overhaul: 2010

Condition: used, grinding wheel diameter / mm Nkodpsx Ddayefx Ad Nst no. of working stations / Stück table surface area / mm

Condition: used, Year of construction: 2001, turning diameter / mm turning length / mm Nedpfsx Tu Suex Ad Nekt control / total power requirement / kW weight of the machine ca. / t required space / m

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 345 mm, travel distance Z-axis: 462 mm, controller manufacturer: MAZATROL, controller model: Smooth G, number of axes: 2, This Mazak Mega Turn 500 was manufactured in 2017. A robust vertical turning machine featuring a Mazatrol Smooth G control unit, it offers a maximum workable diameter of 500 mm and includes a 12-position turret plus a 10-station ATC with Capto C6. Additional features include a high-pressure coolant system at 15 bar and an automatic tool presetter. Contact us for more information about this machine. Additional equipment • High Pressure Coolant System: 15 bar • Automatic Tool Presetter: Yes Nkjdeyalppjpfx Ad Nst Machine Benefits Technical Machine Benefits • Maximum workable diameter: 500 mm • Turret configuration: 12-position turret + 10-station atc with capto c6 Extra Information Machine still under power

Condition: used, Year of construction: 2002, LATHE MORI SEIKI CL 2000 BM Nksdpfoyc Hmhsx Ad Not WITH DRIVEN TOOLS SUPPLIED WITH 7 DRIVEN TOOL POSITIONS MAX. TURNING DIAMETER: 260 mm MAX. TURNING LENGTH: 320 mm TRAVELS: X: 245 mm Z: 350 mm SPINDLE SPEED: 3,500 RPM TOOL MAGAZINE: 10 POSITIONS NO TAILSTOCK COMPLETE WITH ALL MANUALS YEAR: 2002

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Nksdpfx Asyagiqed Nst Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2008, Technical Specifications: 5 axes: X, Z, Y, C, and B axes Turning diameter: 2350 mm Turning length: 1800 mm 2 pallet positions Travel distances (X/Y/Z): 3055 / 1850 / 1800 mm CNC control: MAZAK MAZATROL MatFix Nedoycyn Espfx Ad Njkt Chuck speed: max. 205 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Further technical details upon request Machine weight: approx. 65 t Equipment: Band filter 2 pcs. chip conveyors Spindle cooling unit Oil cooler Infrared probe Various tools Tool cabinets 2 pcs. lifting magnets The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition and wear are appropriate for its age; second-hand machines are sold without any warranty.

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, You can find all further data in the attachment. Machine complete with high-pressure unit and bar feeder. Hardly used; being sold from high-end medical technology production. Purchase price for machine + full-option peripherals: €382,036.86 (all original invoices available). Technical Data SV-20R Total number of axes: 12 Max. rapid traverse speed: 30 m/min Weight: 4,150 kg Coolant tank capacity: 220 liters Dimensions (L x W x H): approx. 2,730 x 1,350 x 1,865 mm Main Side Number of axes: 6 Main spindle axes (spindle head): Z1 / C1 Linear slide axes: X1 / Y1 Turret axes: B3 / X3 / Y3 / Z3 B-axis on turret: freely programmable Max. machining diameter: 20 mm / 23 mm (optional) Max. spindle head stroke (sliding/headstock turning): 205 mm / 50 mm Max. drive power main spindle: 5.5 kW Max. main spindle speed: 10,000 rpm Nedpfxjyacvyj Ad Njkt Linear Slide Tools Turning tools: 7 pcs (□ 12 mm) Cross machining tools: 5 pcs (ER16) Max. drive power cross machining: 2.2 kW Max. cross machining speed: 8,000 rpm Turret Tools Number of tool stations: 8 pcs (all driven) B-axis: 4 stations Max. drive power cross machining: 4.0 kW Max. cross machining speed: 5,750 rpm Back Side Number of axes: 4 Sub spindle axes: X2 / Z2 / C2 Vertical axis for back machining: Y2 Max. gripping diameter: 20 mm / 23 mm (optional) Max. sub spindle drive power: 3.7 kW Max. sub spindle speed: 8,000 rpm Back Machining Tools Tool stations: 8 pcs (all driven) Max. back machining speed: 8,000 rpm Standard Equipment FANUC 31i-B5 control with manual pulse generator C-axis control on main and sub spindle Synchronously driven guide bush unit 7-position turning tool holder on linear slide 5 + α driven tools for cross machining on linear slide 8 + α tools for turning, drilling, cross machining on the turret 4 programmable turret stations for B-axis machining 8 + α tools incl. drill sleeves for driven back machining Sub spindle for back machining Air blow-out device for sub spindle Workpiece collection tray Pneumatic system with maintenance unit Sub spindle part ejection monitoring Workpiece conveyor for unloading workpieces Central lubrication Separate coolant tank with level and flow monitoring Interface for bar feeder magazine Leveling pads and adjusting screws

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, We offer this used Haas DS-30Y CNC turning and milling center, year of manufacture 2011. Voltage: 360-480 V Phase: 3 Frequency: 50/60 Hz Full load current: 40 A Njdpfx Adoycwbpo Nekt Maximum current: 70 A Short-circuit interrupting capacity: 10,000 A Symmetrical short-circuit current: 5,000 A If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2015, Technical data: Capacity Max. swing diameter Ø 600 mm Max. turning diameter and length: Ø 370 x 750 mm Through-hole: Ø 82 mm Spindle Axis height from floor: 1,140 mm Spindle bearing/bore diameter: Ø 140 / Ø 90 mm Spindle nose A2-8 Spindle speed: 4,200 rpm C-axis resolution: 0.001 ° Counter spindle Axis height from floor: 1,140 mm Spindle bearing/bore diameter: Ø 90 / Ø 53 mm Spindle nose F-140 Spindle speed: 6,000 rpm Nkedpfswp Uhhsx Ad Net C-axis resolution: 0.001 ° Stroke lengths and rapid traverses Stroke lengths X-axis: 267 mm, Z-axis: 840 mm Y-axis: -50 ~ +70 mm, A-axis: 780 mm Rapid traverse stroke X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min. / 100% duty) AC 22 / 15 kW Max. torque: 618 Nm (S3 25%) Driven tools Number of tool stations on turret: 15 pcs Max. tool speed 6,000 rpm Drive power (30 min. / 100% duty) 7.5/3.7 kW Maximum torque 48 Nm Tool equipment Driven tool stations: 15 pcs Tool cross-section: 25 x 25 mm For boring operations: Ø 40 mm Dimensions Height: 2,300 mm Depth (without chip conveyor): 2,140 mm Width (without chip conveyor): 3,000 mm Net weight: 6,200 kg

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 Njdpfxjlzm Eqs Ad Nokt tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages Nodpjw Uf Hwjfx Ad Nskt - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Nedportd Uwsfx Ad Nokt Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit Nedpfx Adsycvaqe Nokt - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 Nsdoycu Ruepfx Ad Nekt MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Tailstock Tool setting probe Dust extraction

Condition: used, Year of construction: 1995, machine/vehicle number: 253057, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Nsdjycu Imepfx Ad Nokt

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Nkodpewym Nfjfx Ad Net Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: new, Equipment: rotational speed of tool magazine infinitely variable, Heavy grey cast iron machine bed for optimal smooth running and stability when working with unbalanced workpieces Nedpfx Ajw A Rqfod Nskt Headstock can be moved along the entire machine bed, rotatable by 360° with detents at 0, 30, 60, 90, 135, 180, and 270 degrees Variomatic speed control, infinitely adjustable from 280 to 2500 rpm via rotary knob at the end of the headstock Integrated spindle indexing device 36 x 10° Spindle lock at the front of the headstock for easy changing of workholding fixtures Double wedge clamp for tool rest and extension arm, particularly slip-resistant and efficient Tailstock with robust trapezoidal thread, 108 mm quill travel with scale, 9 mm through hole

Condition: excellent (used), Year of construction: 2003, Technical data: 5 axes: X; Z; Y; C, and B axis Turning diameter: 1250 mm Turning length: 1450 mm 2 pallet stations Travel paths (X/Y/Z): 1875 / 1550 / 1345 mm CNC control: MAZAK MAZATROL 640 M Pro Chuck speed: max. 500 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Tool holder: SK 50 Further technical details on request Machine weight: approx. 55 t Accessories: Belt filter Chip conveyor Spindle cooling unit Nkodpfx Aoyctgnsd Njt Oil cooler Infrared probe Various tools Tool cabinets The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, Advanced CNC lathe designed for refurbishment and precision machining of aluminium alloy wheels. This machine ensures professional surface finishing, damage removal and restoration of wheel appearance. Equipped with a CNC control system enabling quick programming of machining cycles with excellent repeatability and surface quality. Compact size and ergonomic design make it perfect for workshops requiring efficiency and precision in alloy wheel processing. Technical data MAXIMUM TURNING DIAMETER OVER BED 690 mm MAXIMUM WHEEL DIAMETER 28 inches SPINDLE NOSE A2-6 SPINDLE BORE 82 mm CHUCK manual MAXIMUM SPINDLE SPEED 1500 rpm MOTOR POWER 6.5 kW Nkodpfxoycqluo Ad Njt