Used Cooling Tower for sale (7,646)

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm External diameter 2.250 mm Length conveyor belt 48 m Equipment Hjdpfsd Ert Sjx Ab Isk • drying tower downward • infeed left at the top

Year of construction: 2023, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Hedsyvrvpjpfx Ab Isk Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the Baltimore Aircoil Company's (BAC) S1500E series. This specific model is designed for industrial cooling applications and large-scale air conditioning (HVAC) systems where high efficiency and ease of maintenance are paramount. Technology Patented BACross III packing system that allows for easy inspection of the fins to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access hatch and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes standing water and protects against sunlight with special air inlet elements, reducing algae growth. Flexibility: Thanks to its single-sided air inlet, the cooling tower can be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC (Human-Ventilated Air Conditioning): Used in large building complexes as part of the central refrigeration system. Refrigeration Technology: As a condenser in commercial refrigeration circuits. Technical Specifications Airflow: 60.0 m³/s Hsdoynkbmspfx Ab Iek Fan Motor: (3x) 11.0 kW Liquid Inlet: ND (1x) 250 mm Liquid Outlet: ND (1x) 300 mm Number of Fans: 3 Weight: 11,446 kg Overall Dimensions: L x W x H 3,000 x 5,600 x 6,500 mm Due to its size, the unit has two sections; the upper section alone has a height of 2,562 mm. Disassembly and removal by the buyer. Disassembly Service: Professional disassembly can be carried out by our specialized assembly team upon request (€5,000 net). Item Location: 3650 Dilsen-Stokkem, Belgium "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more refrigeration systems – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Hedpsv E Ragefx Ab Iok

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Hjdpfxeui R Smo Ab Isk

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Hsdpovzw H Eefx Ab Iek Characteristics: Thermal power: 4610 kW Incoming temperature: 43 °C Outgoing temperature: 30 °C dBa (20 m): 55 Max. H2O flow: 305 m3/hour

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Hjdpfxsxz Ex Ss Ab Iok Feel free to contact us for more information!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: RAD 864/900 - AB49038, cooling capacity: 1,113 kW (1,513.26 HP), type of input current: three-phase, type of cooling: water, overall weight: 8,449 kg, input voltage: 400 V, pressure: 6 bar, temperature: 21 °C, volume flow: 192 m³/h, pump pressure: 3.27 bar, total width: 2,124 mm, total length: 6,600 mm, total height: 3,180 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process Cooling Tower, air-cooled Type: Cooling Tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD units are complete compact water cooling towers suitable for outdoor installation. Includes pump, water treatment system for biocide and stabilizer, and control and switch cabinet. Cooling capacity kW: 1113 Chilled water temperature outlet/inlet °C: 27 / 32 Flow rate m³/h: 192 Available pump pressure Bar: 3.27 Wet bulb temperature °C: 21 Air flow rate m³/h: 97,200 Sound pressure at 10m (free field) dB(A): 64 Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. current consumption (A): 125 Max. power consumption (kW): 86.6 Dimensions: Hjdpfjwmb T Ejx Ab Isk Length mm: 6,600, Width mm: 2,424, Height mm: 3,180 Weight (transport/operating) kg: 4,194 / 8,449 Connection DN 150 Reference: AB 9038 Year of manufacture: 2024 Condition: Visual 1, Technically OK & tested Test facility, as new Price: on request in Euro (plus VAT ex works Nettetal) – 12 months warranty (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau

Condition: used, functionality: unexamined, For sale: Area Cooling Solution unit Model: APTXN-12; Hodpfxeyt I N Ss Ab Iok Refrigerant receiver type AR-10l; Bristol compressor No. H79A723D8EA OC52; Net price: 470 Euros, negotiable.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Hodpfjyf Hliex Ab Ijk Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Hsdpfoyb Sdiox Ab Iek Made in Germany Good working condition

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm Hjdpfoyb Rqujx Ab Iek

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Hsdpfx Absxlkg As Ijk Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Hjdpfxswxlmae Ab Iok

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hjdsul In Ropfx Ab Isk

Condition: new, Year of construction: 2024, mast type: telescopic, lifting height: 2,000 mm, color: orange, General information Year of manufacture: Jan 2024 Hsdpfjraz N Djx Ab Isk Technical information Drive: Wheel GVW: 275 kg Dimensions (LxBxH): 118 x 74 x 167 cm Functional Lifting capacity: 125 kg Working height: 400 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Ernst van Hek for more information

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! MACHINE DETAILS Machine type: BNK Dimensions & Weight Dimensions (L x W x H): 800 x 700 x 800 mm Machine weight: 150 kg Hedpfxjyn Ab Ee Ab Ijk EQUIPMENT Suitable for various metalworking machines External reference: Lot 15 / L.Schaible

Year of construction: 2011, condition: ready for operation (used), overall weight: 700 kg, total width: 1,500 mm, total height: 1,800 mm, product length (max.): 2,800 mm, Work piece handling system manufactured in 2011. This LANG Eco-Tower + Lang Eco-Feed features a total height of 3192 mm when installed and a load capacity of at least 750 kg. The Eco-Tower has dimensions of 280 x 150 x 180 cm, while the Eco-Feed measures 250 x 70 x 130 cm. If you are looking to get high-quality handling capabilities, consider the LANG Eco-Tower + Lang Eco-Feed system we have for sale. Contact us for further details. • Eco-Tower • Version: 3.5 Windungen (3.5 Windings) • Total height (installed): 3192 mm (at TH=1000) • Operating temperature: -25°C to +55°C • Load capacity (lifting gear requirement): min. 750 kg Additional equipment • Eco-Feed • Weight: 400–450 kg • Dimensions (L x W x H): 250 x 70 x 130 cm • Operating temperature: -25°C to +55°C Hodpfx Aeyynfuob Isk • 50 pcs of vices included

Condition: not inspected (used), Year of construction: 2014, Cooling capacity 10.1 kW Flow rate 5,000 L/h Hsdpfx Aoyyipnob Isk Weight 180 kg

Condition: used, tank capacity: 12,220 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tanks; 1 manhole approx. 340 x 440 mm in the front bottom Overall width: 1,480 mm Overall height: 2,700 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,220 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Discharge: DN40 DIN 11851 Hedpfeyckupex Ab Ijk MATERIAL SPECIFICATION Temper system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage Hodpsyckt Esfx Ab Ijk TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: Crane eyes Design: Suspended Heating/Cooling: available Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.0 bar Agitator: Anchor agitator Location: External storage Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 8,250 liters Double jacket volume: 685.0 liters Product-contacting material: Enamel Condition: Used Last application: Pharmaceutical TANK Max. permissible operating temperature: 200 °C Base type: Lugs HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Manhole/Dome: Top cover Outlet: available AGITATOR Hjdpsyciq Nsfx Ab Iek Agitator arrangement: Centered on the top cover

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Hsdpfx Ajycktrjb Iok Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Year of construction: 2004, condition: used, Conveyor tower Ambaflex / Kolbus SV-400-1800-HS / XAF 660 Year: 2004 Description: Hedpeyyb Rwjfx Ab Ijk - Straight delivery

Condition: good (used), Large throughput cooling spiral. 28 tiers, 880mm belt. Approx 550m belt. Was used as spiral freezer to freeze over 3 tonnes per hour of fried McD chicken burgers. Hjdpfx Abox Hbhce Iek