Used Cooler for sale (1,389)

Condition: used, functionality: fully functional, mileage: 218,402 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Ledpjzmt Tbjfx Aftjrp Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 8 mm Front right - 8 mm Rear left inner - 7 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: used, functionality: fully functional, mileage: 188,930 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Ledezmt S Repfx Aftorp Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Year of construction: 2006, condition: not inspected (used), Manufacturer: AGRAMKOV Tip: Saratronic Lrjdpfx Aeri Rybjftop Coolant type: 134 a Year of construction: 2006

Condition: used, functionality: fully functional, mileage: 201,520 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Ledpfxezmq H Sj Aftsrp Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 15 mm Front right - 15 mm Rear left inner - 7 mm Rear left outer - 9 mm Rear right inner - 8 mm Rear right outer - 7 mm

Condition: used, functionality: fully functional, mileage: 194,327 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne Lrsdpfx Aozmq H Esftep NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 14 mm Front right - 14 mm Rear left inner - 9 mm Rear left outer - 10 mm Rear right inner - 9 mm Rear right outer - 10 mm

Condition: used, mileage: 201,218 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 33.510 BL SA 6x4 tractor unit with EPSILON S260Z96 timber crane First registration: 08/2023 Mileage: 201,218 km Crane operating hours: 830 h Permissible total weight: 33,000 kg Unladen weight: 14,390 kg Wheelbase: 3,900 mm Engine: D2676 LFAF with 12.4-liter displacement, 375 kW and 510 hp Transmission: TipMatic 12 26 DD Profi Performance with ZF retarder Transmission software: "Rocking" and "EfficientRoll" Front axle: reinforced parabolic suspension, 9.5 tons Rear axles: air suspension, 2x 13 tons ECAS air suspension STEERING BRAKE: The steering brake significantly reduces the turning radius, or greatly improves maneuverability. When activated by the driver, the rear wheels on the inside of the curve are braked (speed up to a maximum of 30 km/h). Aluminum fuel tank: 390 liters Extensive safety package with: Digital axle load display, driver airbag with seatbelt pretensioner, MAN ComfortSteering, MAN BrakeMatic, full brake assist, EBA2 Emergency Brake Assist2, ABS, ASR traction control, ESP electronic stability program, MAN AttentionGuard, LRA lane keeping assist, lane change assist LCS, and turning assist. Safety package Light & Visibility Plus GM cab, air-suspended cab, tinted windows, heated and air-conditioned driver's comfort seat, multifunction leather steering wheel, additional cab insulation, cool box under the bed that can be fully retracted, maneuvering lights at the entrance, work lights on the rear of the cab, MAN sound system, truck navigation, large 12.3-inch color display, 2x air horns on the cab, Bluetooth hands-free system for 2 phones, smoker's package, LED headlights, LED daytime running lights, LED fog lights, high beam assist, auxiliary water heater. Tires Lrodpjzb Aqgefx Aftep Front axle: 385/65 R 22.5, tread depth 100%, NEW Rear axle: 315/80 R 22.5, tread depth 90% Timber crane EPSILON S260Z96 Hydraulic reach: 9,600 mm (double extension), support width: 4.70 m, slewing range: 385°, endless rotator 10 tons G121A reinforced version, timber grapple EPSILON type YFG57X, with large log comb, cross-lever control 2+2, crane seat with seat heating and weather protection roof, 4x LED work lights, biodegradable oil Plantosyn 3268Eco, enlarged aluminum tank with 200 liters, ASA aluminum oil cooler 0177, complete control system for DOLL-LOGO21 including NATO socket and hydraulic trailer coupling, Additional light and air connections for "standard" semi-trailers. RENTING is the new BUYING; with us, it is also available as full-service rental or lease-purchase.

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: x 600 mm y 400 mm z 310 mm Includes cooler Lsdozcdwwopfx Afterp Machine is in excellent condition.

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. cooler Lsdjm Uyuxepfx Aftsrp Automatic wire threading

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Lrodpfow Swd Aox Aftop

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: Lrodpfxoy Tybnj Aftsp -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, mileage: 107,492 km, power: 265 kW (360.30 HP), first registration: 03/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2028, color: silver, gearing type: mechanical, emission class: euro4, loading space volume: 7 m³, Year of construction: 2007, Equipment: ABS, air conditioning, Internal vehicle number: G300299 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Truck, HD sewer cleaning unit MAN / ASSMANN TGA 18.360 4x2 BL, self-propelled sewer cleaning machine DA22 Vehicle data * First registration: 28.03.2007 * Mileage: 107,492 km * Operating hours of the HD pump: 1,117 h * Power: 265 kW * Engine displacement: 10,518 cm³ * Fuel: Diesel * Transmission: Manual * Permissible total weight: 18,000 kg * Sliding doors * Color: silver Equipment HD superstructure ASSMANN DA22, type 6.5/227/1020, 6.5 m³, URACA pump HD pump 340 L / min / 115 bar HD spray water 100 L / min / 10 bar HD hose boom DN32 - cassette boom DN25-32 with HD hose reel DN32 Rotor connection DN32 Hose swivel URACA P 3-45 PL65 AKHA 4104 AA 001 0A 0 Guidelines for fluid sprayers Lredpfxozpcxxo Aftep Hand spray gun SP Operating manual for compressed air maintenance unit Overflow valve RV3 Oil / air cooler Winch Limiting parameters Hose winder MPA - valve islands Financing example: * Internal number: G300299 * Purchase price: 49,900.00 € * Down payment: 10% * Term: 60 months * Monthly rate: 781.55 € Residual value: 9,980.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Lrjdpfjmt Dcqjx Aftop Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Lrodpfx Asmt Dcfsftsp Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Lredpfxemt Dbhe Aftop Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR H1515.8 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work Lsdpfxomrmy Ae Aftsrp a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1700L/min Capacity at 6 bar 1650L/min Capacity at 8 bar 1500L/min Capacity at 10 bar 1500L/min Capacity at 12 bar 1350L/min Capacity at 14 bar 1350L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR H1520 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1350L/min Capacity at 6 bar 1350L/min Capacity at 8 bar 1250L/min Capacity at 10 bar 1250L/min Capacity at 12 bar 1150L/min Lrjdsmrmx Tspfx Aftep Capacity at 14 bar 1150L/min Capacity at 16 bar 1050L/min Capacity at 18 bar 930L/min Capacity at 20 bar 930L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), mileage: 392,000 km, power: 434 kW (590.08 HP), first registration: 05/2023, tire size: 385/65R22.5, axle configuration: 6x4, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: AdBlue, Bluetooth, retarder, = Additional Options and Accessories = - Cab = Notes = Scania S 590 6x4 Registration date: 05/24/2023 YS2S6X40002198234 Mileage: 392,000 Opticruise Retarder Fullair WB 335 Parking cooler Refrigeration unit Ledezn Uncjpfx Aftsrp Leather = Additional Information = Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 275/70R22.5; Twin tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 2: Tire size: 275/70R22.5; Twin tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Technical condition: good Optical condition: good Please contact VAEX The Truck Traders for further information.

Condition: used, mileage: 201,269 km, power: 368 kW (500.34 HP), first registration: 03/2017, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,700 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, central locking, crane, differential lock, power mirror, trailer coupling, - AP axle - Work lights - Heated exterior mirrors - Extra cab insulation - Air-suspended driver's seat - Transmission oil cooler - Hydraulics - No spoilers - Automatic climate control - Auxiliary drive on the engine - Radio CD MP3 Bluetooth - Roof beacon - Disc brakes - Heavy-duty bumper - Sun visor - Toolbox - VEB+ - Additional headlights Volvo FMX 500 6x4r with Empl 3-way rock body and Hiab X-hipro 232 ES-5 Diesel engine, 12.8 l, 510 hp / 375 kW, 2,550 Nm VEB+ (Volvo Engine Brake+) Additional crawler gear, two additional reverse crawler gears Auxiliary drive PTER-DIN, engine-side with preparation for pump according to DIN 5462 Lsdpfx Afszn Ix Ustjrp Drive axle RTH2610F, hub reduction Tandem axle lift Central towing device at the front, reinforced (technical: 32 t) Comfort driver's seat, air-suspended, heated, seatbelt in the seat Driver Comfort Package FM Audio High: Radio with CD player, Bluetooth, etc. 6 speakers, 4 in the dashboard, 2 in the doors Standard interior lighting Collision warning with emergency braking function (on stationary and moving objects) Lane keeping assistant Load/axle load display in the vehicle display EBS, Electronic Braking System, Medium package Preparation for OBU (toll device) Rearview mirrors, heated, electrically adjustable, robust LED warning lights 2 air horns on the roof Roof bow for accessories, front Main switch on the chassis Parabolic suspension at the front, 2-leaf Rear axle suspension with air suspension Liftable axle Reinforced transmission Additional crawler gears Auxiliary drive PTER-DIN, engine-side with preparation for pump according to DIN 5462 Drive axle RTH2610F, hub reduction Drive axle ratio 4.12 : 1 Transmission oil cooler, very high performance, air/oil (over 80 t GCW) Protection under the engine oil pan Wheelbase 3,700 mm Aluminum air tank 405 L aluminum tank on the right 64 L AdBlue tank Trailer coupling Rockinger 400 G-150 Hiab X-hipro 232 ES-5 Detachable 5 extensions Rotator Remote control Grapple Work lights Empl 3-way tipper Rock body On-board computer Hydraulic tailgate Retractable hooks on the loading area Hydraulic connections for trailers Contact persons: Mr. Thomas Pletz (German, English) p: @:thomas. Mrs. Daniela RUDOLF (Spanish, Italian, English) p: / @:daniela. Vehicle location: Volvo Group Austria GmbH A-8141 Premstätten Rudolf-Diesel-Straße 13 Austria All information is subject to change without notice, errors and prior sale. Technical information Engine displacement: 13,000 cc Transmission Transmission: I-Shift, automatic Axle configuration Front axle: Suspension: Leaf spring suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Suspension: Air suspension Functional Crane: HIAB X-hipro 232 ES-5 Body brand: Other Empl Rock body Further information Chassis Height: Medium Axle specification: Tandem lift axle Crane other: Detachable crane, remote control, rotator More...

Condition: like new (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. Lrjdpfxozn H T Dj Aftjp * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: used, mileage: 378,263 km, power: 355 kW (482.67 HP), first registration: 08/2022, fuel type: diesel, axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, Seats: fabric, interior color: gray, air suspension, retarder, digital tachograph, fifth wheel coupling, electronic braking system (EBS), electronic stability program (ESP), auxiliary air conditioning: can be retrofitted for an additional charge, adaptive cruise control (ACC), comfort driver's seat, driver's seat with air suspension, armrests for driver/passenger, seat heating, LED headlights, radio, audio interface, lane keeping assist, leather steering wheel, power steering, sunroof, outside temperature display, electrically adjustable exterior mirrors, wide-angle mirrors, central locking, cooler box, hill start assist, daytime running lights, cup holders, information and service system, speed limiter, multimedia system, emergency braking assistant, upper and lower bunk, vehicle location: 01471 Radeburg. Errors and omissions excepted. Lrsdpszn D E Dsfx Aftsp

Condition: used, mileage: 400,407 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, empty load weight: 8,323 kg, maximum load weight: 11,177 kg, overall weight: 19,500 kg, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 4,000 mm, color: black, driver cabin: other, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, Unladen weight: 8323 kg, permissible total weight: 19500 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , seats: fabric, interior color: gray, leaf-air suspension, intarder, digital tachograph, fifth wheel coupling, electronic braking system EBS, electronic stability program ESP, adaptive cruise control ACC, comfort seats, driver's seat with air suspension, armrests for driver/passenger, seat heating, LED headlights, radio, multi-function display, audio interface, leather steering wheel, power steering, electric windows, outside temperature display, electric exterior mirrors, tire pressure monitoring system, central locking, cooler box, work lights, hill start assist, daytime running lights, information and service system, speed limiter, front camera: corner view, emergency brake assist, digital exterior mirrors: corner view, upper and lower bunks, vehicle location: 01471 Radeburg. Errors and omissions excepted. Lrjdpfezn D Hbox Aftep

Condition: used, mileage: 146,212 km, power: 355 kW (482.67 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,050 mm, next inspection (TÜV): 07/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, trailer coupling, Body manufacturer: SDG, permissible total weight: 26,000 kg, fabric seats, air suspension, intarder, digital tachograph, trailer coupling: 2x, BDF interchangeable frame: SDG, electronic braking system EBS, brake assist, adaptive cruise control ACC: with predictive cruise control PCC, driver's seat with air suspension, seat heating, LED headlights, radio, audio interface, sound system, lane keeping assist, power steering, adjustable steering column, electric windows, sunroof, fog lights, electric exterior mirrors, curb mirrors, tire pressure monitoring, central locking, sun visor, cooler box and refrigerator, axle load indicator, work lights, ambient lighting, hill start assist, cup holders, turning lights, mirror package, turning assist, information and service system, upper and lower bunk, sprung cab, formerly a rental vehicle, vehicle location: 01471 Radeburg. Errors and changes excepted. Lsdpfxozn D E Re Aftjrp

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) Lrsdpfx Afey Tw R Hjtsp • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm Lredpfxeylkxao Aftsp • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Condition: used, functionality: fully functional, mileage: 176,345 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Ledpfjzmb Dhex Aftjrp Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side skirts on fuel tanks Roof air deflector Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm