Used Cooler for sale (1,531)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design Gbodpfx Akjz Rmaboyou - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Gjdpfjz Rl Nhsx Akysbu Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: excellent (used), Hoshizaki HNC-120AE-L Sushi Display Case Hoshizaki HNC-120AE-L Sushi Display Case, 120 cm Product Description The beautifully designed display cases maintain a constant temperature and humidity level, unlike air circulation systems that dry out the displayed sushi. This ensures that the sushi stays fresh for longer and the quality remains visibly at the highest level. Hoshizaki display cases do not defrost, so no condensation drips onto the displayed sushi. This prevents contamination of the products. The included presentation grids can be inverted to increase the cooling performance. Manufacturer: Hoshizaki Model: HNC-120AE-L Sushi Display Case Width: 1200 mm Height: 280 mm Voltage: 220-240 Wattage: 150 Gbodpfx Aksiu U Slsysu Recommended Retail Price: €2900 You can find more freezers in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: like new (used), Industrial Linear Cooler – Stainless Steel Industrial linear cooler in stainless steel, designed for the continuous cooling of food products after cooking, scalding, pasteurization, or other heat treatment processes. The equipment allows for the gradual and controlled reduction of the product temperature as it moves through the different cooling zones, providing a high-capacity solution for continuous processing industrial lines. Its stainless steel construction, long processing length, and integrated transport system make it especially suitable for fruit, vegetable, canning, frozen food plants, and other food applications. MAIN FEATURES - Type: Industrial linear cooler - Application: Continuous cooling of food products - Continuous processing system - Automatic product transport - Several sections/process zones - Water circulation and distribution system - Integrated process pipes, pumps, and valves - Primarily stainless steel construction - Robust structure for industrial operation - Large treatment surface - Continuous discharge system - Top access for inspection and cleaning - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The product from a previous thermal stage enters the linear cooler continuously, where it is transported through the different zones of the equipment. During the process, the product temperature is gradually reduced using a water-cooling system, according to the configuration and operating conditions of the installation. The linear design provides a controlled dwell time and allows for maintaining a continuous product flow between the different production phases. It can be installed after: - Linear cookers - Scalders - Heat treatment systems - Vegetable preparation lines - Pasteurization processes And subsequently connected to: Gedpfxjx S Iu Ts Akyobu - Inspection belts - Draining systems - Sorting equipment - IQF freezing tunnels - Filling and packaging machines - Weighing and dosing systems APPLICATIONS Especially suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and other food industries that need to quickly reduce the product temperature after a thermal stage. Depending on its configuration, it can be used with vegetables, legumes, fruits, and other food products processed continuously. Its large capacity, stainless steel construction, and linear configuration provide a robust solution for continuous cooking and cooling industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Cooling compressor Gsdpoyb Rquofx Akyebu Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Year of construction: 2016, condition: good (used), Moretto COOLER RC15 R4070 (2016) Gbsdpox Ttixjfx Akysu 15,1 kW 4,3 ton kcal/h : 12984 Total average absorbed power: 4,3 kW Tank capacity: 90 dmc RC MINI Portable Chillers The RC MINI series chillers are designed to deliver high standards of energy efficiency and functional performance. Their robust stainless steel construction ensures long service life and excellent corrosion resistance. Thanks to their compact dimensions , the units can be installed directly beside the injection moulding machine (IMM) while maintaining high energy efficiency. Each chiller is equipped with a hydraulic circuit featuring automatic filling , a circulation pump, and an insulated storage tank. A filter and pressure gauge are included as standard. RC MINI chillers are MOWIS-ready. Features 1. Long service life with corrosion-free stainless steel construction 2. High energy efficiency 3. Insulated storage tank

Condition: excellent (used), Year of construction: 2008, 355 USED WP Aroma Cooler, a device for rapid cooling of bread and baked goods. TECHNICAL DATA: - Cooling temperature to: +18°C EXTERNAL DIMENSIONS (in cm): - height 305, - width 130, - length 227. INTERNAL DIMENSIONS (in cm): - height 198, - width 78, Gbsdpfxoywummo Akyju - length 187. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 10 kW (13.60 HP), Negative-temperature refrigeration unit with evaporative cooling for negative-temperature chambers, -20°C. Power: 10 kW Operating conditions: -28/35°C Gjdpfx Ajzz N Ttjkyobu In very good overall condition.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 269.7 kW (366.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,250 mm, total height: 1,590 mm, warranty duration: 12 months, Dry-cooler AERMEC WTR 8043BTD 269.7 KW Cooling capacity: 269.7 kW (40/35 - 25°C) Year of manufacture: 2023 Fluid: Glycol + Water Number of fans: 4 pcs. Fan Diameter: 800 mm Volume: 80 dm³ External surface: 630.5 m² Dimensions: 4.25 x 1.1 x 1.59 m. Weight: 743 kg. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Gsdsz Agxvepfx Akysbu Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. Gjdpfx Aoz Nc Rlokysbu * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: AR-D170L2, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, Unit, Century absorption chiller The unit is currently gassed with nitrogen and has lithium bromide, the whole was disconnected from the installation due to a change in technology, but in a fully functional state. The cooling capacity of the device was rated at 560kW, but after failures it can be about 540kW. In total, we had to plug 4 tubes, thus weakening the unit's power, but this is only a few percent. Godpfxswl Dzce Akyjbu Since November 2024, the unit has been disconnected from the installation and not used.

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Gjdpfozdknqsx Akyjbu

Condition: good (used), Lister KL5L air-cooled chiller Gjdpfx Aksx Elvzeyebu The unit operates on the principle of indirect cooling: The internal pump pumps cold water from the integrated tank to the external process (e.g., a machine). The water absorbs heat there, warms up, and flows back into the Lister chiller's integrated evaporator, where the warm water transfers its energy to the refrigerant and is cooled down again. The extracted heat is dissipated into the installation room as warm air via the fan. Due to its compact 3.25 kW cooling capacity, this model is ideal for smaller industrial applications, such as cooling laboratory equipment, laser systems, small welding units, or machine tools. Manufacturer: Lister Type: KL 5 L Cooling capacity: 3.25 kW Voltage: 400 V Frequency: 50 Hz Current: 6.3 Amps Refrigerant: R 134a Maximum operating pressure: 13 bar Dimensions (W x D x H): 940 x 560 x 1100 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, CARRIER 09VE 1064 WATER DRY COOLER – YEAR 2025 Industrial Carrier dry cooler featuring a V-shaped coil, two independent water circuits and axial fans. Supplied with a steel support frame, electrical control panel and DN 65 hydraulic connections. TECHNICAL DATA Manufacturer: Carrier Model: 09VE 1064 UI 1270A9B 12A1V1 CU Product reference: 7416018.702174 Serial number: 04136261/0001 Year of manufacture: 2025 Working fluid: Water Number of circuits: 2 Volume per circuit: 120 litres Maximum working pressure: 13 bar Maximum temperature: 110 °C Hydraulic connections: DN 65 Power supply: 400 V / 3-phase + N / 50 Hz Electrical power input: 35 kW Rated current: 46.8 A Gbjdpfxozvf Ebo Akysu Weight: 1,340 kg PED: 2014/68/EU PED classification: Article 4.3, Group 2 liquid Certifications: CE, UKCA and EAC The unit is installed outdoors and available for inspection. The scope of supply includes the dry cooler and its electrical control panel.

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process -Continuous product transport -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. Gjdpfxezxcb Ee Akyjbu The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2020, operating hours: 900 h, functionality: fully functional, NCT304 control (Windows-based, touch screen, USB, 19-inch LCD monitor) Table size: 1750 x 700 mm Max. table load: 1200 kg "T" slots in the table: 18 x 5 x 125 mm Distance between the spindle nose and table surface 135 - 835 mm X travel: 1600 mm Y travel: 700 mm Z travel: 700 mm Taper: SK40 Tool magazine: 16-station, arm type Max. spindle speed: 10000 rpm Drive power: 20 kW Power supply: 22 kVA Dimensions (L x W x H): 4370 x 2915 x 3027 mm Weight: 10000 kgs Accessories, equipment: - Coolant system - CTS (Coolant Through Spindle), 20 bar - Machine feet - Central lubrication system Gedpoz I Sdxefx Akyebu - Signal light - Spindle cooler - Machine documentation The machine is barely used and is in absolutely mint condition.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 950 kW (1,291.64 HP), overall weight: 8,300 kg, total width: 2,260 mm, total length: 9,600 mm, total height: 2,300 mm, Equipment: cooling unit, Five Carrier chillers are available, all in excellent working condition. Gedpfszz Itxex Akyebu

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Gbjdpfxovllxdo Akyju Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKE000052, total length: 1,070 mm, total width: 1,200 mm, total height: 1,960 mm, cooling capacity: 27.82 kW (37.82 HP), The TCX4-90A series from Atlas Copco is a compact all-in-one chiller with an air-cooled condenser with integrated hydro module. The TCX28A chiller is specially designed for cooling water (or a mixture of water and glycol) for a wide range of industrial processes. Atlas Copco chiller TCX 28 A (indoor installation / +5°C) with integrated tank and 3 bar pump group Cooling capacity: 27.8 kW (37.2 kW) Absorbed power: 9.35 kW (9.33 kW) Water connection 2" Dimensions: 1067x1200x1960 mm lxwxh Godpfx Astq Twnskyobu Used machine from year of construction 2022, very good condition, fully functional, without warranty

Condition: like new (used), Rofin RoHS WKH/W-13000-W-MC-SON-3-D laser cooling system Laser cooling system Rofin RoHS WKH/W-13000-W-MC-SON-3-D Rofin Controller LasCon WaC 2 Störk Tronic thermostat Buschjost solenoid valves 400 Volts Unused, in-stock item Gbedsq Hdw Uspfx Akysu More new and used items can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2021, Engie chiller Gbodpeyan Arefx Akysu Capacity: 1.9 MW Year of manufacture: 2021 Refrigerant: R-1234ze

Condition: good (used), Autotherm ATK 2000 cooling system, 20.5 kW cooling unit in a 20-foot container. Technical data Gsdsuzhcuspfx Akysbu Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal power: 20.5 (31.5) kW Nominal current: 50 (71) A Supply line fuse: 80 A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Inlet: Flange SDIN2633 DIN100 PN16 Outlet: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2" internal thread Well water inlet: 2" internal thread Well water outlet: 2" internal thread Adiabatic inlet: 3/4" internal thread Filling: manual 3/4" internal thread Water circuit Coolant: Water/glycol (90% / 10%) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 AFAE-EUUE Delivery pressure: ... 2.15 bar Delivery rate: 58 m³/h Consumer circuit Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE Delivery pressure: max. 10.6 bar Delivery rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6058 x 2438 x 2591 Internal dimensions mm (L x W x H): 5898 x 2352 x 2390 Usable area inside m²: 13.88 Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency converter for demand-based, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Gbjdpfjt Tfbqox Akyeu Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: used, The device is used for cooling ground fruit, sauces, and liquids. The set includes a tubular heat exchanger, a product tank with pump, control cabinet, and chiller unit. All devices are mounted on two transport platforms. Capacity: raw material from +20°C to -2°C = 6,000–9,000 kg/hour, depending on product and raw material temperature. The device is fully operational. Gedpfox Ncmfjx Akyebu

Year of construction: 1980, condition: good (used), Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar -Dimensions: 910/400/H700 mm -Weight: 49 kg Gbsdpezt Ip Dofx Akyeu