Used Cooler for sale (1,540)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Iiodpfxsz Irfvj Ahyoh Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: used, mileage: 392,177 km, power: 375 kW (509.86 HP), first registration: 08/2022, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2027, color: yellow, gearing type: automatic, total length: 9,250 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MB Actros 2551 MEILLER Roll-off Trailer, BigSpace L cab, 6x2 Wheelbase: 4900 mm Suspension: Air-Air MEILLER Type: RS 2170 + Hydraulic locking Year of manufacture: 2022 Special equipment: Axle load measuring system, Front axle load 8.0 t, Airbag, driver's side, Ambient lighting LED, Trailer stabilization program TSA, Work lights, rear wall of cab, top, Audio system: Digital radio DAB / DAB+, Equipment package: Driving, Right exterior mirror with maneuvering position, Electric sunblind for windshield, sunblinds for side windows, driver's door, equipment package: Economy, Fuse box, Equipment package: Media, Battery 220 Ah (AGM), Additional compressed air tank, Air horn, Driver assistance system: Turning assistant, Cab: Interior trim Style-Line, Cab: with air suspension, Cab: Shaving mirror, Tinted windshield with band filter, Generator 150 A, regulated, Transmission 12-speed - Type: G 281-12, Rear lights LED, Interior filter for construction site vehicles, Automatic climate control, Upper comfort bunk, narrow, Fuel tank: 630 L, aluminum, left, Cool box / refrigerator, Air filter: Cyclone air filter, Roof air deflector (lockable, without base trim), 2-cylinder air compressor, Mercedes star, illuminated, Rear PTO, ISO pump, Engine brake, enhanced, Parameterizable special module, Premium Comfort mattress, lower, Frame lowering with air spring residual pressure control, Frame overhang 1950 mm, Smoker's package, Spare wheel, Headlight cleaning system (SRA), Sliding / lifting roof electrically (glass), Drawers under dashboard, Seat cover / upholstery: Co-driver's seat velour, Seat cover / upholstery: Driver's seat velour, Seats in cab: Armrests on both sides, co-driver's seat, Seats in cab: Co-driver's seat, comfort suspension seat, Seats in cab: Co-driver's seat backrest, foldable, Seats in cab: Driver's seat with massage function, Seats in cab: Driver's seat, comfort suspension seat, Sound system, Storage compartment, outside left, Additional 12V / 15 A socket in co-driver's footwell, Additional 12V socket, 24V / 15 A socket in storage compartment, right side, 24V / 25 A socket in co-driver's footwell, 24V socket in storage compartment, right, 24V socket in cab, Curtain for sleeper cab, Oil cooler, transmission Additional equipment: Axle configuration: 6x2, Actros 5, Actros cab L, Approach / front mirrors, heated, Trailer brake 2 - line, Connections on the left, Trailer socket 24V / 15-pin, Exhaust to the outside right, Equipment package: Powertrain 2, Batteries arranged side by side, Differential lock, rear axle, Compressed air connection in cab, Compressed air tank, steel, Compressed air unit with condensate monitoring, Compressed air unit, medium, Automatic switch-on for dipped-beam headlights (light sensor), Cab: Cab entrance, fixed, Cab: Interior package, chrome, Cab: Tilting mechanism, hydraulic, Cab: L BigSpace, 2.50 m, flat floor, Cab variant: BigSpace, flat cab floor, Cab: Width 2.50 m, Cab: Height 765 mm, Cab variant: L, Door extension for cab, Storage box, left, under cab, Storage compartment, outside right, Exterior sun visor, Lifting roof, electric, Iiedpfxez Hruho Ahyjh Front bumper corners in plastic, Navigation system, Remote online function, Interactive multimedia cockpit, Carpet on engine tunnel, Sunblind, side window, driver's door, Preparation for upper comfort bunk, wide, Radiator grille, air intake behind cab, Vehicle outline lights LED, Suspension: Air / Air (full air), Fens

Condition: used, mileage: 100 km, power: 390 kW (530.25 HP), first registration: 09/2026, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, * Air suspension * DAF corner view * Super Luxury driver's seat * Auxiliary air conditioning * DAF truck navigation * Exclusive speakers * Battery disconnect switch Iiodjz Htafopfx Ahyoh * Front axle: 385/55 R22.5 Conti * Rear axle: 315/70 R22.5 Conti * ZF Intarder * Double transmission PTO * 765 l aluminum tank * LED rear lights * NATO socket * Hydraulic system * 2-line system with pipe swivel * Mouvex compressor, 2.5 bar * Typhon 20 R with cooler * 3-year vehicle warranty Errors and prior sale excepted. No liability for printing and typographical errors.

Condition: used, mileage: 946,296 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 09/2027, emission class: euro4, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seat) (Vehicle 186) First registration: September 14, 2006 946,296 km Engine: 6,374 cc 210 kW / 286 hp Euro 4 MOT valid until 12/2026, technical inspection valid until 09/2027 Permissible total weight: 19,000 kg, unladen weight: 10,730 kg, payload: 8,270 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approx. 70%, rear approx. 40%, rear approx. 60/60% Double door at the front and rear Driver's cabin with door Ramp Fully automatic transmission Microwave Manually operated windows 2 x electric + heated mirrors Auxiliary heater + 2nd heater Retarder Stop brake LAWO Mobitec ICU 400 Emergency stop 12-volt socket Last inspection on March 14, 2025, at 892,114 km, next inspection at 952,114 km Iiodpfx Ahsz H Ec Eeysh Chassis members rusted December 27, 2024: Oil cooler sealed, snowman seal + seal behind it on the engine block replaced. August 13, 2025: Front axle, right-hand side, transverse arm replaced. September 22, 2025: Rear axle, both air springs replaced on the right-hand side, air spring replaced on the left-hand side. March 3, 2026: Rear axle, transverse arm replaced, air spring replaced on the right-hand side, both air springs replaced on the front axle, upper transverse arm replaced on the left-hand side of the front axle. March 5, 2026: Rear axle, brakes completely new, both brake calipers on the rear axle overhauled. July 21, 2025: Rotary control replaced. Various signs of wear and tear, in line with the age. Price: €3,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. Iijdoz Imdajpfx Ahyoh * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Iedpfx Ahez Ea Sxjyoih Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotary range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Iodpfx Ajz Eby Rehysih Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, mileage: 730,000 km, power: 460 kW (625.43 HP), first registration: 08/2016, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Mercedes Benz Actros 1863 Flatbed with Tarp, Retarder, Full Air Suspension, Navigation, Camera, Tail Lift, Euro 6 For inquiries: 0926813 * Condition: very good * Engine power: 460 kW / 630 hp * Engine displacement: 15,569 ccm * Permissible total weight: 18,000 kg * Weight: 10,740 kg * AdBlue * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Adaptive cruise control * Lane keeping assist * Storage compartment above driver / center / passenger * Audio system: CD radio (Bluetooth) * Navigation system * Rear view camera * Electric sunroof * Automatic climate control * Auxiliary heater * Air-suspended comfort seat for driver * Seat heating for driver * Emission standard EURO 6 * 2x bunk beds * Pull-out cooler box under the bed * Electrically adjustable and heated exterior mirrors * Stowage compartment on the outside, left * Suspension: Air / Air (Full Air) * Electric windows * Fog lights * Electrically extendable sun visor * Underrun protection * Additional headlights on the cab Tail lift: Dautel * Load capacity up to max. 1,500 kg * Year: 2016 Body: Refrigerated box * Manufacturer: Schwarzmüller * Wear-resistant wooden floor * Edscha tarp Load compartment length: 7,300 mm Isdpjz Ec Nyjfx Ahyoih Load compartment width: 2,480 mm Load compartment height: 2,800 mm Tires: 1st axle: 385 / 55 R22.5 30%, air-suspended 2nd axle: 315 / 70 R22.5 20%, air-suspended Schwarzmüller PA 2/E Flatbed with Tarp, Through-Loading System Int. No. for inquiries: 0926812 * Condition: very good * Year of manufacture: 2016 * ABS * EBS * BPW axles * Through-loading system * Edscha tarp * 2-axle air suspension * Aluminum underrun protection Load compartment length: 7,250 mm Load compartment width: 2,480 mm Load compartment height: 2,770 mm Tires: * Front axle: 385 / 55 R 22.5 air-suspended / 35% * Rear axle: 385 / 55 R 22.5 air-suspended / 35% ----Price: EUR 39,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale are reserved.

Condition: used, maximum load weight: 21,230 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 10/2019, next inspection (TÜV): 01/2027, total length: 11,500 mm, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, Rohr RSAK/29 IV refrigerated trailer / electric cooler / tail lift The cooler can be operated either via the truck’s electrical system or via mains power using an Amphenol cable. Equipment: * Manufacturer: Rohr * Type: RSAK/29 IV * First registration: 10/2019 * TÜV (technical inspection): 01/2027 * 2-axle semi-trailer * Refrigerated trailer * Electric refrigeration unit * Tail lift * Air suspension * Disc brakes * ABS / EBS * Lashing rails in the cargo area * Support legs * Side underrun protection * Color: White Iodez Ec Upjpfx Ahyoih Other: Well-maintained Rohr RSAK/29 IV refrigerated semi-trailer with an electrically powered refrigeration unit and tail lift. Inspection possible at any time by appointment. Errors, changes, and prior sale are subject to change.

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Like-new and excellently maintained M.A.N. 18-ton TGS flatbed truck with Palfinger PK 14.502 SH crane featuring 6-stage outriggers, a side reach of approximately 17 meters, and a vertical reach of approximately 20 meters, with remote control, 5 + 6 control circuits, a 6.20 m long flatbed, a payload of 6.1 tons, a 470 hp engine, and a wheelbase of 5.50 m, with only 9,300 km on the odometer, auxiliary drive, air suspension on the rear axle, intarder, air conditioning, auxiliary heater, digital mirror replacement system MAN Opti_View, and more. Equipment: 20,500 kg permissible total weight TGS TN long cab with bed and rear window Wheelbase 5,500 mm Euro 6 e engine 4x2 drive Unladen weight 11,860 kg Payload 6,140 kg with 18,000 kg permissible total weight Payload 8,640 kg with 20,500 kg permissible total weight New aluminum flatbed with split side panels and 4-way retractable boarding Flatbed dimensions approx. Length 6.20 m x Width 2.48 m x Height 60 cm Palfinger PK 14.502-SH folding crane, mounted behind the cab The crane has been inspected at a Palfinger workshop UVV crane certification valid until October 2026 Max. lifting moment 13.8 mt Only 610 operating hours according to the hour meter PAL com P7 remote control Engine Start/Stop with RPM increase Crane with 6-stage outriggers Rotation servo and grab control Oil cooler 10.5 kW Crane outreach up to 16.80 meters Lifting capacity at approx. 4.20 m / 2,950 kg // 6.20 m / 1,840 kg // 8.20 m / 1,300 kg // 10.30 m / 970 kg // 12.50 m / 780 kg // 14.60 m / 660 kg // 16.80 m / 530 kg 2-point hydraulic stabilizers with pivoting supports Transport position monitoring HPSC additional function 2. ballast Auxiliary drive, gear-dependent, type NH/4c, without flange, f=0.97, position approx. 3:30 Differential lock in rear axle MAN TipMatic 12.26 DD transmission MAN intarder with MAN EVBec, adjustable MAN Idle Speed Driving transmission function MAN freewheeling transmission function Air conditioning, Climatronic Water auxiliary heater, 4 kW Trailer hitch, ring-feder type 400 G 150A with pneumatic connections Permissible total weight of combination 44,000 kg Trailer load 26,470 kg Front axle with leaf suspension and rear axle with air suspension Front axle 9,200 kg, rear axle 13,000 kg Axle ratio i=2.85 Stabilizer for front and rear axle MAN EasyStart hill start assist Full brake assist Emergency brake assist EBA EBS ABS ASR ESP Iedpfx Asz Hhk Eehyoih Lane departure warning LDW MAN Attention Guard Reversing warning Cruise control Sun visor Multi-function steering wheel MAN EasyControl control panel, 4 functions operable from the outside when the door is open Glass sunroof, electric Electrically adjustable and heated exterior mirrors Electric windows MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Professional Navigation 12.3 inch MAN Sound System Digital side mirrors Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating Seat covers in comfort quality 2 air horns on the roof 2 revolving warning beacons, pre-installed Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information is without guarantee. Errors and prior sale are reserved. Internal vehicle number: 2475

Condition: used, mileage: 43,500 km, power: 174 kW (236.57 HP), color: grey, gearing type: automatic, Year of construction: 2023, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electronic window lifters - left - Electronic window lifters - right - Driver airbag Iiedpfxez Hidme Ahyeh - Mr. Kiel will be happy to assist you, Tel: BA3 Active Brake Assist, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C74 Illuminated Mercedes-Benz entry sill, CA4 AIRMATIC, CL1 Steering wheel adjustable for tilt and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CM2 Bumpers and attachments painted in vehicle color, CN1 Exterior rocker panels, CU4 Aerodynamics package, D14 Anodized roof rails, D34 Panoramic sunroof, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1F Display diagonal 26 cm (10.25"), E1T Touchpad, E34 Buffer battery for starting process, E4S Smartphone integration package, E65 Burmester surround sound system, E6M MBUX multimedia system Mid, E70 Switch position Lower control panel, ED4 Fleece battery 12 V 92 Ah, ED5 Parameterizable special module, EK1 Connection strip for electrical connection, ES2 12 V socket in trunk / cargo area, ES3 12V sockets for rear seat rows right and left, ES9 Media Interface cable kit, ET4 Active Distance Assist DISTRONIC, EX8 Navigation Plus, EZ6 Parking package with 360° camera, EZ8 PARKTRONIC, F48 Heating for windshield washer system, F65 Exterior mirrors, automatically folding in, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated with integrated turn signal, F72 Exterior and interior mirrors automatically dimming, FA6 Chrome trim on rocker panels, FB1 AMG trim elements, FB4 AMG spoiler edge on tailgate, FC1 Electronic key in chrome look, FG6 Center console with cooler compartment, FG9 Cup holders that can be attached to rear armrests, FH6 Instrument panel in leather look with decorative stitching, FP3 Mirror package, FS5 Illuminated mirrors for sun visors, FY1 Anti-theft package, FZ8 Comfort opening and closing with IR remote control, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H05 Seat climate control in the rear, 1st row of seats, H07 Seat climate control in the rear, 2nd row of seats, H12 Auxiliary hot water heating, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH4 Automatic climate control system THERMOTRONIC, HY1 Remote control for auxiliary hot water heating, HZ0 Auxiliary heater electric, HZ7 Air conditioning semi-automatic, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for passenger seat, JA1 Warning light for windshield washer fluid level, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JP1 PRE-SAFE, JP2 Assistance package, JS1 360° camera, JW5 Lane Keeping Assist, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, K51 Mis-fueling protection, KB5 Main tank 70 liters, LA2 Driving light assistant, LC1 Ambient lighting, LC4 Comfort roof control unit, LC5 Ambient lighting in the exterior mirrors, LC6 Lighting in the grab handle in the rear with reading spot, LC7 Lighting for footwell in front, LC8 Ambient lighting on the tailgate, LE1 Adaptive brake light, LG2 LED Intelligent Light System, LG4 Tail, brake and turn signal lights in LED technology, LG8 High beam assist... Metallic paint, Sunroof, Alloy wheels, Electronic immobilizer, ESP, Navigation system, Auxiliary heating, Particulate filter, Warranty, Rain sensor, Panoramic roof, Electri

Condition: excellent (used), functionality: fully functional, mileage: 1,080,169 km, power: 294 kW (399.73 HP), first registration: 06/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 1, Year of construction: 2015, Equipment: ABS, central locking, cruise control, differential lock, navigation system, parking heater, MAN TGX 18.400 / Low Liner / Retarder / Euro 6 • Manufacturer: MAN • Model: TGX 18.430 • Mileage: 1,080,169 km Isdpfx Ajz Dw Afjhyjih • First registration: 06/01/2015 • Power: 294 kW / 399 hp • Transmission: Automatic • Suspension: Air / Air • Low Liner • 6-stage Retarder • Air-suspended cab • Long-distance cab • Heated seats • Air conditioning • Navigation • Cooler box • Roof hatch • Lane keeping assistant • Cruise control • Traction control • Differential lock • Hill start assist • Distance control • Lift axle control • Euro: 6 • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, mileage: 451,897 km, power: 309 kW (420.12 HP), first registration: 02/2019, fuel type: diesel, overall weight: 40,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,750 mm, loading space length: 14,500 mm, loading space width: 2,550 mm, loading space height: 3,700 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.420, well-maintained with service history, German vehicle Cab: * XLX cab * CD radio comfort (Bluetooth) * OBU – pre-installation * Cab: with air suspension * Automatic climate control * Auxiliary air conditioning * Additional heater * Additional thermal insulation * 2 x comfort bed * Electric sliding/lift sunroof (glass) * Cooler box/refrigerator * Sun visor * Exterior sun visor * Sun visor for side windows, driver and passenger door * Driver comfort seat * Multifunction steering wheel * Exterior mirrors, electrically adjustable and heated Chassis / other equipment: * Axle configuration: 4x2 * Euro 6 engine * 14-speed gearbox * Differential lock * Full air suspension * Retarder * Approx. 500 l aluminum tank * Saddle height 1,050 mm * Tires: * Front axle 355/55 R 22.5 (80 %) * Rear axle 315/60 R 22.5 (70 %) Truck – transport semi-trailer, fully galvanized Obermann MB36000 First registration: 03/11/2008 * Hydraulic winch with separate diesel engine * Extendable approx. 2,000 mm * When transporting tractor units, approx. 300 mm height above the ground in the area of the front axles Iijdpfjz Dy Hajx Ahyjh * Gigant axles 10 tons * 3rd axle with trailing steering * Air suspension * Lifting and lowering * Aluminum ramps * 2 x storage compartments * ABS / EBS * Support legs * Tires 205/65 R 17.5, approx. 90 % remaining tread ---- Non-binding offer, subject to availability at the location in Bocholt, subject to prior sale and errors. Sale only to commercial customers or for export.

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, If desired, the tractor unit can also be sold separately. Mercedes Arocs 2546 6x4HAD (Vehicle number: 11765) Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window * Storage compartment exterior flap, left * Exterior sun visor, transparent * Air horn * Roof strobe light * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Electric auxiliary heater * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under console * Stowage flaps, above windshield * Lifting roof, electric * Refrigerator, in drawer, under bed ----Electrical and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel compartment, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reverse warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assist * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE Ijdez Dzqtepfx Ahyjih * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooler * Water pump, regulated ----Powertrain: Twin-plate clutch * Transmission G 281-12/14,93-1,0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle, steered & liftable * Fifth wheel coupling with Doumatik ----Palfinger M10L80 crane on 2-axle semi-trailer: * 2 hydraulic supports * 4 adjustable timber stakes (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hours * Next inspection: Technical data * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technical gross vehicle weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next inspection due: 05.2026 -----Janzen System T19 tandem timber trailer (Vehicle number: 11676) * 4 adjustable timber stakes ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Overall length: 7650 mm * Permissible/technical gross vehicle weight: 18000/19000 kg * Tare weight: 2950 kg * Tire dimension: 385/65R22.5 * TÜV (German technical inspection): 11/2026 * Next inspection due: Vehicle number/Vehicle: 11675+1167----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transportation * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. Iiodpfez E A Rwsx Ahysh The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, particularly for temperature control of injection molds and other process tools. Serial No.: 102010730001 Year of manufacture: 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min Iisdpfx Ahoz Ek Spsysh Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Condition: used, mileage: 13,487 km, power: 160 kW (217.54 HP), first registration: 08/2010, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro5, total length: 6,390 mm, total width: 2,420 mm, total height: 3,100 mm, loading space length: 2,961 mm, loading space width: 2,385 mm, loading space height: 1,685 mm, Equipment: all wheel drive, Errors and prior sale excepted! Internal number: 1111. V224078 ----EQUIPMENT * Paint finish 2 6431 bronze green, matte, CARC/IR paint * Lights HELLA/VIGNA+ * Trailer coupling RINGFEDER * Windshield wipers * Heater SOFICA * Rims LEMMERZ * A99 push rod control for long wheelbase * B28 Mech. quick-release device for spring accumulator cylinder * B42 Trailer brake system, two-line * B56 Compressed air filling connection, front * B68 Brake connection, front, left Iiedez Emrxspfx Ahyoh * C04 Chassis parts lowered for superstructures * C34 Anti-slip coating on bumper * C67 Fuel tank enlarged * C75 Protection for tilting hinges, cab * C87 Exhaust pipe pointing upwards * D65 Fastening parts for external superstructures * E11 Electrical system 24V, with camouflage lighting system * E22 Extendable battery box slide * E33 Battery main switch on the battery box * E35 Circuit breaker * E40 ABS trailer socket 24V, 7-pin / 5-pin * E41 Trailer socket 24V, 12-pin * E43 Trailer socket 24V, 7-pin * E44 Socket for external starting * E48 Power supply and warning system (cab-platform) * E52 Antenna cable, power supply for radio * E55 Pre-installation, wiring/antenna, for radio * E57 Socket front and rear, 2-pole * E58 Socket 7-pin, for reversing lights * E59 Socket 6-pin, for battery maintenance * E69 Reading light * E73 Gel batteries, 2x 12V / 100 Ah, maintenance-free * F09 Cab, large, 120mm extended / 120mm raised * F21 Round roof hatch, swiveling * F22 Base carrier for roof structure * F43 Auxiliary heater with engine preheating * F56 Integrated air conditioning * F60 Raising device for cab * F64 Tilting hinges for cab * F78 Painted bare parts * G50 Transmission oil cooler * J28 Tachograph, digital, with additional writing function * JY2 Deactivation warning message missing driver card * JZ1 Tachograph manufacturer Siemens VDO * L02 Outline lights to the front, white * L18 Fog lights, halogen, suitable for wading * L30 Stone guard grille for headlights * L32 Stone guard grille, metal, for turn signals * L35 Headlight beam adjustment * L71 Side marker lights with integrated reflectors * M55 Fuel preheating, with water separator * M89 Intake air preheating for cold start * MQ4 MB 4-cylinder diesel engine OM924LA, 160KW(218PS) * MS5 Engine version Euro V * Q11 Hook trailer coupling, Ringfeder Ruwg K.D * Q32 Rear crossmember for increased trailer load * R30 Semi-lowbed rims 11-20 SDC * S02 Air-suspended driver's seat * S10 Air-suspended passenger seat * S19 Seat cover, imitation leather * S41 Storage compartment behind the passenger seat backrest * S51 Holder for first-aid kit * S56 Cab rear wall without window * S59 Power windows, electric, left and right * S77 Transport holder for a G36 rifle, right side * S78 Transport holder for a G36 rifle, left side * S81 Mirror holder widened * T08 Spare wheel holder * T30 1 spare rim 11x20 SDC * W60 German as language * X39 Lubrication chart, German * Y18 Fire extinguisher with holder * Y31 Tire filling hose with pressure gauge * Y36 Flag holder, left * Y37 Holder for traffic wand * Y38 Glare protection for glazing * Y46 Warning triangle and warning light * Y48 External starting connection cable 6m * Y67 Color control for second paint (paint additive) * Y68 Color control, paint version, cab in 2K * Y69 Painting of aggregates in 2K (LZ52) * Z01 Vehicle with left-hand drive * Z16 Special parts, suitable for wading * Z39 Lashing and loading eyes * Z48 Special parts, German Bundeswehr * Z66 Reduction of wading depth from 1200mm to 1000mm

Condition: used, mileage: 169,950 km, power: 220 kW (299.12 HP), first registration: 08/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 6 m³, loading space length: 6,420 mm, loading space width: 2,490 mm, loading space height: 400 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ACTROS 1830 L, flatbed, 6.40 m, open, with ZAA-AHK (trailer coupling) * Mounting for forklift truck up to approx. 2,000 kg dead weight * ADR type class FL, including EX/II, EX/III and AT * Loading edge height approx. 1.04 m, ideal for scaffolding construction * Vehicle number for customer inquiries: 4529 * ADR type class FL, including EX/II, EX/III and AT * Predictive Powertrain Control * Distance Assist System * Differential lock, rear axle * Air conditioning * Engine version EURO VI, D * Navigation system * Lane Keeping Assist * Environmental badge (green) * Traffic sign recognition * Trailer coupling, standard, D40, ring spring * Driver alertness system * High Performance Engine Brake * Light sensor * Air suspension, rear axle, low frame * Multimedia cockpit, interactive * Rain sensor * Maintained according to service schedule * Electronic Stability Program (ESP) * Front axle with air suspension * Active Brake Assist 5 * Actros S/M cab * Trailer brake, 2-line, brake connections on the left * Trailer socket 24 V, 15-pole * Electronic braking system with ABS and ASR * Driver's suspension seat, comfort * Parking brake, electronic * Mercedes PowerShift 3 * Locking system, with central locking * Cruise control * Preparation for Mercedes-Benz Truck App Portal * Two-seater * Storage compartment, high, on engine tunnel * AdBlue tank 60 l, left * Roof hatch/ventilation flap, roof * Transmission G 140-8/9.30-0.79 * Heater, electronic compressed air supply unit * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Wheelbase 4900 mm * Tires tubeless, 315/60 R 22.5, rear axle * Tires tubeless, 315/60 R 22.5, front axle/front lifting axle/rear lifting axle * S-cab ClassicSpace, 2.30 m, tunnel 320 mm * Sun visor, side, driver's side * Tank 290 l, left, 650 x 565 x 950 mm, aluminum * Preparation for toll collection * Weight variant 18.0 t (7.5/12.6) * Comfort telephony, wireless charging * Steering oil cooler * Digital tachograph, 2nd generation No liability for printing and typographical errors Sales only to business customers Errors and prior sales excepted* Changes, prior sales and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Warranty insurance possible on request from the insurance company Iiedpoz D Nrrjfx Ahyjh * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: good (used), mileage: 599,464 km, power: 345 kW (469.07 HP), first registration: 04/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, Year of construction: 2019, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, seat heater, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Roof spoiler - EPS (Electronic Power Steering) - Low noise - Air horn - Particulate filter - Radio/CD player - Rain sensor - Sunroof - Sleeper cab - Side door - Seat heating - Auxiliary heater - Toolbox = Additional Information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,540 kg Payload: 11,460 kg GVWR: 19,000 kg Emission class: Euro 6d Technical condition: good Optical condition: good Warranty: No liability for printing & typographical errors, changes, prior sale and mistakes! Vehicle number: 136 VOLVO FH 460 / Globetrotter / ADR / Eu6d .: YV2RT40A4KB904655 Ijdpsz E Rzwofx Ahyeih Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Cooler box Auxiliary heater Distance control assistant Lane keeping assistant Navigation system ADR Emission standard EURO 6d No liability for printing & typographical errors, changes, prior sale and mistakes! = Company Information = No liability for printing & typographical errors, changes, prior sale and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. Ijdsz Ig Swjpfx Ahyjih *

Condition: used, functionality: fully functional, Comafer Dinamic 250N briquetting machine with closed-loop oil cooling and cooler capacity: 100–250 kg/hour, depending on the material. Briquette diameter: 75 mm. cylindrical housing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930, pressing force approx. 1100 kg/cm2. 2 cylinders. briquette cylinder ø 200 mm. pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, without fixing rods for the round die. Iisdez D A Ugepfx Ahyjh Electrical control panel with PLC, automatic and manual cycle. Shut-down mechanism with open die and die pressure gauge. Digital thermostat for oil temperature control, level switch to prevent oil leakage. Closed-loop oil cooling system (air/oil). Closed-loop cooler for die cooling (580 mm x 550 mm x 908, weight 56 kg). threading head for the production of long briquettes, briquettes with uniform length, complies with CE standards dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg

Condition: new, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension Iodoz D Utuepfx Ahyjih - Brake booster - Differential lock - Low noise - Speed limiter - Air conditioning - PTO - Rear view camera EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP SCORPION SCO 25-59 Unladen weight: approx. 12,050 kg Payload: approx. 19,950 kg Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel configuration: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8 liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment: Engine & Drive Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Twin-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel configuration 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver's seat Co-driver's seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument cluster Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic stability program (ESC) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision assist Driver attention assist Adaptive cruise control SCORPION SCO 25-59 ROLL-OFF DUMP BODY Robust and powerful roll-off dump body for daily use in construction, waste disposal, recycling and container Your advantages • Ready for immediate use: concrete pumps, concrete mixers, dump trucks, roll-off dump bodies • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila...

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Rear view camera - Sun visor EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP TMK 22m³ Rectangular dump body tipper Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8-liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment - Engine & Drivetrain Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine PTO SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Iiedez Erufopfx Ahyeh Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver seat Passenger seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument panel Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic Stability Program (ESP) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision warning Driver alertness system Adaptive cruise control Rear view camera Reversing warning LED headlights LED daytime running lights Automatic headlights Additional Equipment Tipper equipment: EuromixMTP TMK 22m³ Rectangular dump body tipper Your benefits • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: ...

Condition: used, IPG Type: Laser welding pliers LSS-5M-3500-3F Ytterbium fiber laser The laser welding pliers LSS5 M complements the series as a compact welding tool. With laser power ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser pliers Ijdozd Rinspfx Ahyjih Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0 kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60 Hz 32A/120k Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have over the phone.

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Iiedozd Rmgspfx Ahyeh Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.