Used Cooler for sale (1,440)

Condition: new, Year of construction: 2023, Air-cooled chilled water unit ENR160, 130 kW at 7/12°C, internal P3 pump, internal 390 l buffer tank. The unit is ideally suited for process applications as it is equipped with a shell-and-tube evaporator, a buffer tank, and an internal P3 pump. Pgjdpfx Aegfvlzsfujr Low GWP refrigerant R454B, winter package, RS485.

Condition: new, empty load weight: 600 kg, maximum load weight: 1,400 kg, loading space length: 2,880 mm, loading space width: 1,380 mm, loading space height: 1,730 mm, tire size: 165R13C, Refrigerated box trailer from trailer manufacturer TEMARED model Cooler 3015/2 2000kg 288x138x173cm. A low loader box trailer with cooling unit up to +6°c and extremely stable, welded and hot-dip galvanized frame. All-round insulation and cooling from renowned manufacturers such as GOVI or CIBIN. All Temared refrigerated boxes have a wide range of standard equipment. Insulated walls, refrigeration unit from Govi or Cibin 230V +6°c, an extremely sturdy hot-dip galvanized steel frame, double-leaf door, espagnolette lock, supports, lockable, interior light, automatic support wheel and a bolted V-drawbar. Pgjdpfx Aorwzk Hjfuer We offer accessories for Hapert refrigerated trailers such as shelves, lashing rails, 100km/h approval, tool box, lashing straps and anti-theft devices at a reasonable price.

Condition: good (used), Spiral Cooler with Refrigerated Chiller Room In good working condition Chiller Room dimensions 5.4mtr x 4mtr Pjdpfx Aen Tmh Ssfusgr Spiral Cooler 660mm wide wire mesh belt 13 floors high, 170mm high between floors Complete with refrigeration compressor. In use at present

Condition: as good as new (ex-display), Year of construction: 2025, 5 kW air-cooled chiller for outdoor installation, equipped with axial fans. Standard equipment includes a p3 pump. Technical specifications available upon request. The machine is in stock at our Güglingen warehouse and readily available. We will gladly provide you with free, no-obligation advice regarding your specific application. Pgedpfx Ajfqlllofujr We constantly have a rotating selection of chillers in stock in various sizes, available as demonstration units or new, and sometimes also used. In addition, we may accept trade-ins for refrigeration systems or purchase them outright.

Condition: excellent (used), Year of construction: 2006, CONTINUOUS FLOW WATER CHILLER LANGHEINZ WKG 90 Cooling capacity: With an inlet temperature of approximately 17.5°C and a flow rate of 7.5 liters per minute, the chilled water extracted has the following temperatures: 10 liters: +1.9°C 20 liters: +2.7°C 30 liters: +3.2°C Peak cooling capacity: 180 liters per hour Continuous cooling capacity: 90 liters per hour Batch size: up to 50 liters with approximately 20 kg of ice storage Electrical connection: Pgsdpfsghrmzjx Afusr 230V/50Hz Water connection: 1/2" Dimensions W x H x D: 950 x 560 x 530 mm

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20-NL-5012-2, Used Cabero GCHSD089MB/X7S-40 Y V dry cooler. Complete with 14 Ebm-papst W3G800-HG95-07 fans – 50/60 Hz – 0.9 kW – 770 rpm – 800 mm diameter, providing a total airflow of 214,700 m³/h. Also includes a control cabinet with Ziehl-Abegg UNIcon fan controller. Specifications: Brand: Cabero Model: GCHSD089MB/X7S-40 Y V Product type: Dry cooler Capacity: 428.9 kW Number of fans: 14 Fan speed: 770 rpm Coolant: Glycol Airflow: 214,700 m³/h Fan diameter: 800 mm Surface area: 3,428.3 m² Psdex A Tyaopfx Afusgr Dimensions: 12,650x2,360x1,750 mm (LxWxH) Year of manufacture: 2020 Stock: 1 unit

Year of construction: 2018, condition: new, functionality: fully functional, New oil cooler Alfa Laval rated capacity at 64,5/57,5C° = 277 KW Flow rate 80m3/h 3 Fans, 845rpm, 0,77KW each Several units available Pgodexu Eb Hjpfx Afuor

Year of construction: 2001, condition: used, size 765 x 545 x 95 mm 10 units on stock Pgjdpfxsvimryj Afujr - price per unit -

Condition: used, mileage: 254,918 km, power: 213 kW (289.60 HP), first registration: 08/2012, fuel type: diesel, number of seats: 58, gearing type: automatic, emission class: euro5, color: other, brakes: retarder, total length: 12,750 mm, total height: 3,200 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - Webasto = Further Information = Damage: none Pgsdpozwc Shefx Afusr = Company Information = We are an international company based in Belgium, located in the Brussels area (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers a large premises serving as an exhibition area. We always have numerous buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school bus, or city bus for you, tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Opening hours for viewing used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 24,297 h, machine/vehicle number: 161711, controller model: MAZAK & FANUC L-64, laser power: 1,500 W, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 420 mm, No minimum price – guaranteed sale to the highest bidder! The machine is suitable for processing sheet metal, tubes, and profiles! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 420 mm Swivel range A-axis: ±300° Swivel range B-axis: ±135° Laser power: 1,500 W CO₂ laser model: YB-L150A8M Sheet metal dimensions max.: 1,250 × 1,250 mm Table load max.: 145 kg MACHINE DETAILS CNC control: MAZAK & FANUC L-64 Operating hours: 24,297 h Machine weight: 8,300 kg Last operated until: March 2025 Currently disconnected and stored Pedpfx Aoztxttjfuogr EQUIPMENT Cooler Control cabinet

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 Psdpfozqupxex Afusgr MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Podozw H Ruopfx Afuogr Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: as good as new (ex-display), Industrial Heat Exchanger, Gas Cooler, Air Conditioning Cooler, Güntner, Used Machine Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 035.1/13-30-0007072P Overall dimensions: Width: 2450 mm Depth: 600 mm Pgjdpsy Uda Djfx Afujr Height: 760 mm Year of manufacture: 2016 Fan data: Fan type: VT03149U Speed: 2344 / 910 min⁻¹ Current consumption: - / 0.35 A Technical specifications: Volume: 8.9 liters Maximum permissible pressure: 32 bar / 0 bar 0 / -1 bar Permissible temperature range: -50 °C / +100 °C -5 °C / +40 °C Test pressure: 35.2 bar Fluid group: 2 / gaseous state

Condition: used, Industrial Heat Exchanger, Gas Cooler, Air Conditioning Cooler, Güntner, Used Machine Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 035.1/13-43-0007080P Overall dimensions: Width: 2440 mm Depth: 570 mm Height: 760 mm Year of manufacture: 2016 Fan data: Fan type: VT03133 Speed: 2479 / 1480 min⁻¹ Current consumption: 1.35 A Technical specifications: Volume: 6.8 liters Maximum permissible pressure: 32 bar / 0 bar Pgedpfjy Sgiiox Afusr 0 / -1 bar Permissible temperature range: -50 °C / +100 °C -5 °C / +40 °C Test pressure: 35.2 bar Fluid group: 2 / gaseous state

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. Pjdoghmp Nopfx Afuogr We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Pedpehbdg Ujfx Afuegr

Condition: like new (used), functionality: fully functional, 2x 2.92m2 Plate Heat Exchanger and Miscellaneous Spares (Unused) 1x plate type condensate blowdown cooler, surface 2.9M2 SA-516 GR.70N material 13 barg design pressure -20 / 150 deg c design pressure 12 plates E1958 Tag 1x plate type process steam condensate cooler, surface 2.9M2 SA-516 GR.70N material 14 barg design pressure -20 / 150 deg c design pressure 12 plates E2901 Tag 2x tightening bar E1958 SL002, E2901 SL002 Part No 10x gasket EPDM Psdpfxezwx Tno Afuegr E1958 SL001, E2901 SL001 Part No 2x startup & commissioning spares E1958-1, E2901-1 Part No

Condition: used, Year of construction: 2019, functionality: fully functional, Control System (Standard) - HEIDENHAIN TNC-640 HSCI control unit with software option 1&2 (see control system options), DCM collision protection function - 5-axis simultaneous operation - Block processing time 0.5 sec. - NC memory capacity 21 GB on SSDR memory card - USB interface - Ethernet network interface - 1024-block look-ahead function - 3D tool length compensation function - DCM (Dynamic Collision Monitoring) - TSC (Spindle Thermo-Compensation) - Tool center point control (TCPC) - smarT.NC (alternative operating mode for dialog and plain text programming in a mix, particularly suitable for beginners) Linear axes: - Travel ranges X/Y/Z: 600/600/500 mm Linear roller guides: - Manufacturer: INA - Size: 45x45 mm Linear axis accuracy: - Manufacturer: HEIDENHAIN length measuring systems - Resolution linear glass scale: 0.0001 mm - Positioning accuracy X/Y/Z axis: 0.005 mm - Repeatability X/Y/Z axis: ±0.0025 mm Rotary axis accuracy: - High-precision angle encoder for A- and C-axis - A-axis positioning accuracy: ± 30" - C-axis positioning accuracy: ± 5" Ball screw (oil-lubricated): - Manufacturer: INA - Pitch: 12 mm - Max. speed X/Y/Z axis: 36,000 mm/min Swivel and rotary axis: - Swivel axis (A): - Swivel range: +120° / -120° - Drive: Worm gear (optional: direct drive) - Brake: hydraulic (1,200 Nm / 50 bar) - Speed: 16.6 min-1 - Rotary axis (C): - Rotation angle: 360° (0.001° increments) - Drive: Direct drive (torque motor) - Brake: hydraulic (2,900 Nm / 50 bar) - Speed: 90 min-1 Swivel and rotary table: - Table diameter: Ø500 x 420 mm - Max. table load: 600 kg - Max. load height: 430 mm - T-slots (number / size / slot spacing): 7 x 14 mm x 75 mm Spindle: - Manufacturer: ROYAL Precision Tools Corporation - Drive type: direct - Spindle motor / SIEMENS motor 1PH8133 - Power S1/S6 (40%): 25/35 kW - Max. torque S1/S6 (40%): 134/261 Nm - Max. speed 15,000 min-1 - Spindle taper: DIN SK-40 / MAS BBT-40 (Option: HSK-A63) - Spindle oil cooler Coolant management: - External coolant supply around the spindle nose - Internal coolant supply through the spindle 20 bar with cartridge filter 40 µm, pumps adapted in the coolant tank - Number of magazine positions: 30 (optional: chain with 32, 48, or 60) - Magazine type: Carousel / Fixed position, coded - with tool change arm (double gripper) - Max. tool length: 300 mm - Max. tool diameter: Ø78 mm - Max. tool diameter: Ø120 mm with locked neighboring positions - Max. tool weight: 7 kg Chip management: - Hinged band chip conveyor Other standard equipment features: - Automatic central lubrication - High-pressure chip flushing / chip shower - Coolant gun - Control cabinet air conditioning - Coolant flushing gun Pgedpfx Afozwxicousr - Work area lighting - 3-color warning light (cycle active / completed / alarm message) - Hand tool kit, leveling bolts, nuts, shims - EMC and safety modules for CE compliance - Portable, electronic handwheel - CE compliant with European directives - Hydraulic and pneumatic supply prepared through the table (3x 80 bar hydraulic and 1x 6 bar pneumatic connection). - Oil skimmer

Condition: used, functionality: fully functional, mileage: 218,402 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Pjdpozmt Tbsfx Afusgr Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with carbon filter, sun, mist, and air quality sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 99 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 8 mm Front right - 8 mm Rear left inner - 7 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Pgsdpfevc Aklsx Afuer Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, mileage: 805,352 km, power: 537 kW (730.12 HP), first registration: 06/2016, fuel type: diesel, overall weight: 30,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, SCANIA R730 V8 6x2 Boogie, full air suspension, with large tipping hydraulics First registration 06/2016 Mileage 805,352 km Wheelbase 3,100 mm Axle loads: Front axle 9,000 kg Drive axle 12,700 kg Tag axle 8,300 kg Maximum technical vehicle weight 30,000 kg Maximum technical train weight 66,000 kg Engine DC16 Generation 2, Common Rail, Euro-6 Aluminum diesel tank 710 L Opti-Cruise transmission, 2 pedals, type GRSO925R Transmission oil cooler RETARDER R4100 2-circuit tipping hydraulics Tires: Front axle 385/65 R 22.5, tread depth 9 to 10 mm Drive axle 295/80 R 22.5, tread depth 9 to 10 mm Tag axle, twin tires 275/70 R 22.5, tread depth 11 to 12 mm RUDMATIC snow chains Full air suspension 2 storable ride height levels Adjustable fifth wheel coupling Complete chassis cover in black Axle load display ESP ASR Lane departure warning system Topline cab CR19, 2 beds, cab air suspension 4-point, tinted windows, heated windshield, double-glazed door windows, complete interior with leather and Alcantara, leather seats for driver and passenger, refrigerator under the bed with freezer compartment, premium radio with sound system, automatic climate control XENON headlights, roof bar with 4 spotlights + 4 spotlights mounted in the bull bar, 2 air horns, deep sun visor with LED lights, warning bar, rotating beacon Pgjdszwi Naepfx Afujr

Condition: used, functionality: fully functional, mileage: 182,900 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Retarder: YES ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank: 65 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Pgsdszn Hh Uspfx Afujr Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: no Roof air deflector Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 8 mm Front right - 8 mm Rear left inner - 9 mm Rear left outer - 9 mm Rear right inner - 9 mm Rear right outer - 9 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler Podpfxoy Tw R Hs Afusgr • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), mileage: 651,948 km, power: 368 kW (500.34 HP), first registration: 06/2020, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,340 mm, total width: 2,550 mm, total height: 3,810 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, - 2. Diesel tank - Heated mirrors - Carplay - Digital tachograph - Driver's card (recording device) - Fixed - Highline - LED lamp - Manual - Radio/cassette - Lane keeping assist - Blind spot sensor - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Tare weight: 9150 kg, Gross vehicle weight: 26500 kg, Total tank capacity: 475 liters, 2. Diesel tank, Fifth wheel height: 103 cm, Fifth wheel: Fixed, Number of locks: 1, Winch pulling capacity: 4 tons, Suspension type: Full air, Cabin type: Highline, Cruise control, Driver's card (recording device), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat cover: Leather, Seat adjustment: Manual, 6x2/4 Mega Full Air Retarder Leather LED Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Pgodpfx Afszwcxnjujr Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 2: Tire size: 355/50R22.5; Lift axle; Steerable; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire size: 295/60R22.5; Dual tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 5 mm Weights Tare weight: 9,150 kg Payload: 17,350 kg GVW: 26,500 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial information Leasing price: €953 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety Podpszv Sbiofx Afuegr - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared