Used Coolant Valve for sale (10,518)

Condition: good (used), Year of construction: 2017, operating hours: 8,595 h, load capacity: 5,000 kg, lifting height: 5,000 mm, free lift: 150 mm, load center: 600 mm, fuel type: diesel, mast type: tele-panorama, construction height: 3,500 mm, DGUV certified until: 08/2026, Equipment: CE marking, air conditioning, cabin, lighting, sideshift, Linde H 50 D-02 - 600 Diesel Forklift with the following specifications: Lifting capacity: 5,000 kg at 600 mm load center Lifting height: 5,000 mm Overall height: 3,500 mm Year of manufacture: 2017 Operating hours: 8,595 Linde 5.0-ton diesel forklift with full cabin and heating, air conditioning, 4-cylinder engine, telescopic clear view mast, fork positioner with side shift, dual pedal controls, good non-marking tires, fork length 1,200 mm The machines are fully operational. For more information about the machine, feel free to contact us by phone or email. Transport can be arranged with our own low-loader with ramp, but is not included in the offer. Sale is only to businesses. Subject to prior sale, errors, and typing mistakes. Iiodjwybz Aepfx Afish More information and offers can be found on our website!

Year of construction: 2025, condition: used, Technical details: liter capacity: 21 l/min Pressure of coolant: 50 bar rated current: 20 A Clean water tank capacity: 300 l total power requirement: 16 kW weight of the machine ca.: 200 Kg dimensions of the machine ca.: 1,2 x 0,8 x 1,4 m We are importers for FRASCARA high pressure coolant systems Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 bar pump. When the filters are getting clogged, an alarm is triggered and the operator switches to the second filter bank. The first set of filters then can be cleaned while the system is in full operation. The filters are made of wire mesh and can be reused. The system is very quiet and extremely reliable! Isdpfsvfdmyex Afisih *

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Iijdpfx Asw Tulgjfioh Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 Iisdpjum I Sfsfx Afish End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: used, 7 SK 50 tool holders with coolant ring . Iiodpfxsw Nakgo Afioh . 4 holders with drill tools : 1 x 50 mm 1 x KOMET KUB 2 / 2 / 58 = 60 mm 1 x 70 mm 1 x 75 mm .

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Isdpfxohwt H Ao Afijih Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Rotary valve. Type 6-bladed, with drive -Speed: 3.55 rpm -Drive motor: ABM 0.12 kW -Inlet/outlet: 280 x 1340 mm -Dimensions: 755/1545/H755 mm Iisdpfx Afjw H Agaoish -Weight: 198 kg

Condition: used, Year of construction: 1998, functionality: fully functional, • Used: Deep bed filter • Manufacturer: Bär + Co. Anlagentechnik GmbH • Model: TF 361 Isdpfx Afjw R Twvsioih • Year of manufacture: 1998 • Supply tank capacity: approx. 750 liters.

Year of construction: 2022, condition: ready for operation (used), A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible. Iijdeudm Dtjpfx Afish

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: VAR1001122X, total length: 418 mm, total width: 426 mm, 2x wam diverter valve (can be sold separately), good as new: pipe diameter : 102mm installation size : 418mm descending line : 30 product contact : stainless steel exterior : aluminium Stand detector Iisdpfxsudxage Afioh EX (atex) certified Dimensions : enclosure

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Isdpfjfn Tu Tox Afieih Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor Iijdophvl Topfx Afish - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 2000, condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Rotary valve. Type JK-S w/ 6 blades, with drive -Speed: 19 rpm -Drive motor: KEB 0.55 kW -Inlet/outlet: 220 x 1500 mm Iiedpfxow Hzx Ue Afieh -Dimensions: 340/1970/H305 mm -Weight: 113 kg

Condition: used, functionality: fully functional, Samson 3271Pneumatic actuator; 3730-1 Positioner ; 3241 Valve;Pneumatic Valve. Iisdettl R Ispfx Afish Specifications: Positioner: Supply max 7 bar Input 4-20 mA DC Pneumatic actuator :120 cm2 Air supply max 6 bar 2 for sale. 1 piece/500 EUR. Good working condition. Please check out our other listings as well.

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors Isdpfx Asfn Tvhjfioih A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: good (used), Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100 B 2537/00 -Quantity: 1x control card available -Price per piece -Dimensions: 130/50/H30 mm Iiodpsqku Nuofx Afioh -Weight: 0.3 kg/pc.

Condition: used, functionality: fully functional, Bürkert 153757 Directly Operated Solenoid Valve with Copper manifold, Connector. Iedpfxst D Ribo Afioih 5 for sale. 1 piece/75 EUR. Good working condition. Please check out our other listings as well.

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg Iiodpfx Aofn Tvisfioh ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Year of construction: 2012, condition: good (used), Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Handover: in the current condition as seen -Maintenance unit: incomplete, see photos -Manufacturer: Festo, maintenance unit from CNC machining center Santenberg GTC S 2 Isdpfx Aoi Sdg Dofisih -Type: D-MIDI BD43 BO43 Individual components see photos -Pressure: max. 16/12 bar -Dimension: 530/105/H270 mm -Weight: 4.9 kg

Year of construction: 2017, condition: used, functionality: fully functional, Gemü 55415D19510 2/2-Way angle seat globe piston valve, pneumatically operated with threaded cast copper. PST 4,8-7 bar 180 C PS 12 bar 4 for sale. 1 piece/55 EUR. Good working condition. Please check out our other listings as well. Ijdpot D Rfiefx Afisih

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up Isdodf Ud Sepfx Afioih -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Iododf Ufdjpfx Afijih Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. Iiodpfx Ajfn Tvkjfijh ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: new, Hydraulic cable winch HAW3000 with electric valve for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. Ijdefn Tvfepfx Afijih You can make many applications easier with the HAW3000 hydraulic winch. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 125 l/min ⦁ Gewic [...]

Condition: new, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, tractors, viticulture, horticulture and many other applications. With the hydraulic winch you can make many applications easier. - Pull the firewood to the log splitter and set it up - pull logs on trailers - Pull out rootstocks and trees - As an attachment winch on back cranes and small excavators - As winch for small tractors and narrow track tractors A robust steel construction with 3-sided screwing possibility (left, right, back) with 12 threaded holes, this offers many possibilities for fastening the winch (threads are cut and painted. They have to be re-cut with a tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 ccm (standard = 400 ccm). Depending on which speed and traction you need. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg rope speed: 47 m/min at 60 L/min hydraulic oil Colour: red Dimensions: Length: 500 mm Length with pendulum: 570 mm width front: 120 mm Width rear: 180 mm bearing width: + 30 mm Iisdpfx Afodf Ua Rsijh Motor width: + 200 mm Height: 250 mm Item number: HAW1700 NOTE: Figure 1 is marked with m