Used Drain Valve Washer for sale (8,149)

Condition: good (used), Drain valve for wash basin Pedpfx Aaeb Tdazeljpl -Outer: Ø 80 mm -Inside: Ø 50 mm -Connection: Ø 47 mm -Number: 13x available -Price: per piece -Weight: 0.1 kg

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour Podpfx Ajxur Sfoalopl • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Pjdpfxswt S Nke Aalopl Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-800 • Type: Double Helix Screw Washer • Capacity: 80 ton per hour • Dimension: 1750 x 8650x1900 mm Pjdpjwclabsfx Aaljpl • Screw Size: Ø 800x8000 mm • Motor: 2 x 15 kW Heavy duty Gamak • Water Consumption: 65-230 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Ppedpfxewck N Ij Aaljl

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: Ppjdpfxjq Nf S Rs Aalel 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? Ppsdsxp Urdepfx Aalol CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. Pjdpfxsxpxyrs Aalopl What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: good (used), IWT Utensil / Crate Washer Model 9LAV65 Year 2009 316 stainless steel throughout. Pull out twin racks, both are removable, dimensions of each rack 1400mm W x 900mm D Pjdpfswh A E Ejx Aalepl 330mm between racks Total wash area 1400mm W x 760mm H 3 dosing pumps - wash agent, detergent, rinse agent Also one mobile rack on castors for unloading of washed product on removable racks Heating source - hot water or steam Wash pump and rinse pump Digital control panel Stainless mesh screen filter in main wash area

Condition: used, Overall dimensions: 1720 x 1100 x 1600 mm Podji Arlhjpfx Aalspl Tank size: 1200 x 600 x 1400 mm Weight: 248 Kg Material: Acid resistant It is equipped with a connection suitable for filling and draining (ball valve), and a pneumatic (electric) valve serves to aerate the tank.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Pedefz Dvvopfx Aaljpl Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Pjdsfz Ax Sjpfx Aalspl Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Ppedpfoflpmqjx Aalsl Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Ppodjfzrapepfx Aalel • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Psdpofz A D Nefx Aaljpl Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,360 mm, overall weight: 430 kg, load capacity: 30 kg, pump capacity: 80 l/min, TECHNICAL DETAILS Psdpeyf A I Hofx Aalopl Load capacity: 30 kg Pump capacity: 80 l/min Tank volume: 2 x 150 l MACHINE DETAILS Voltage: 400 V Power consumption: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,360 x 1,560 mm Weight: 430 kg

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Ppsdsv Dpy Njpfx Aalsl Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: excellent (used), Year of construction: 2001, Industrial parts washer Ppedpfxeurcxdo Aaljl Fabr.ITS Type: Claener Bj.07.2001 .

Condition: good (used), Year of construction: 2007, Connected load: 75 kW Control system: Siemens Simatic Panel Touch Cleaning agent: aqueous cleaning agents Filling capacity: 1,070 l Loading/unloading by roller conveyor system, approx. 400 mm, roller width 600 mm Loading conveyor, discharge conveyor with cooling section, removal station, with transfer unit Removal / control station f. Oil separator Ppodpfxeydlhas Aalsl

Condition: used, Year of construction: 2011, Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate infeed height: 1,100 mm Crate outfeed height: 4,100 mm Weight: approx. 1,500 kg Water connections: Cleaning water inlet: R 1 1/4” Rinsing connection: R 3/4” Construction: stainless steel (except drives) Control system: LOGO controller Electrical installation: per customer specification Scope of Delivery  Spiral crate washer (upper unit) Lower tank body Ppedpfx Aaowu S Suelol

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Pjdpfjtrbrqex Aalepl

Condition: used, Year of construction: 1983, Overview  This bottle washing machine was manufactured in 1983 by Italian company Silmo (model Praktika). The machine was part of a filling line with an overall output of 2,500 bph and is available immediately. Technical data  Capacity: 1,000–2,800 bph at 30-second cycle 1,900–5,600 bph at 15-second cycle (Was operated in a line running 2,500 bph) Formats: Prepared for 0.33 L Longneck Bottle rows: 12 bottles per row Special features: Label removal   Psdjyb Sxtepfx Aalepl

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Pedpjvl Huajfx Aaljpl

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Ppodpfx Aovrfivsaljl

Condition: used, Year of construction: 2022, Overview This continously crate washer, type: Nowicki MPP-150P was built in 2022 in EU.  for washing E1, E2, E3 crates with a maximum size of 600 x 460 x 420 (length x width x height). Water heating system: steam Also suitable for the bowls and GN 1/1 containers. Stainless steel construction Width (adjustable) min. : 200 mm / min. height: 50 mm Closed water circulation with filter Automatic dosing pump High-pressure nozzles adjustable in angle Display Regulation and control of temperature up to +65 C  On/Off Pump Automatic/ Manual mode Setting time and date Nozzle pressure adjustment: up to 4.5 bar Service Mode Water-resistant, IP 67 Technical Details Capacity: max.150 crates/ hour Height: 1820mm Width: 1057mm Length: 2629mm Scope of delivery continously crate washer | Nowicki | MPP-150P | 2022 Ppjdpfx Ajvnl T Hsaljl