Used Cooking Line for sale (9,830)

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h Kwodex Tifijpfx Ad Net - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Full salad wash + dry line, previously washing and drying 350kg of product per hour Infeed elevator (4m x 0.5m) + vibrating pan Barrel leaf washer, capacity approx 350kg per hour. The barrel is 4.5m long x 0.8m diameter Kwjdpfx Adovzydaj Njt De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt 2.75m x 0.6m Vibrating pan 1.5m x 0.4m Lynnmore salad dryer 5.1m x 0.9m Hitec salad dryer 5.1m x 0.9m

Year of construction: 2008, condition: used, Bongard baguette line Kjdpsc Utgwofx Ad Nowt Bongard divider with double piston Bongard intermediate cabinet Bongard long moulder with table Connection: 16 Ah Hourly output: 1,600 pieces Top condition and ready for immediate use

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 300 584, overall weight: 8,000 kg, type of input current: three-phase, input voltage: 400 V, power: 2 kW (2.72 HP), input current: 85 A, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder Kjdjxrtwwepfx Ad Nowt - Pusher / compactor - Electrical control cabinet - Overband magnet - Sampler The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Kwjdpfx Adsx Tf Ite Njt

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Kodox Tf Hcspfx Ad Nowt Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, anti-condensation treatment, light-transmitting profiles

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Kwjdpfx Adoftb Ebo Nst Operating pressure +/- 5

Year of construction: 1980, condition: ready for operation (used), Fully Integrated Concentrate Factory (Tomato Paste 450 Ton/day – Mango & Guava) Manufacturer: Ing. Rossi Catteli – Model Annetto T15 – Parma, Italy ⚙️ Capacity: 450 tons of Tomato/day Kodpfjxdn R Asx Ad Njwt 🛠️ Equipment Model: 1980 ✅ Fully refurbished in 2024 (Electrical + Mechanical – Like New) 🔸 Production Line Includes: Receiving & sorting unit - Hammer + Mono Crusher (12 tons/hour) - 3 Pulper finishers- 14 tube pre-heater HB- Storage tanks- Triple-effect evaporator including 3 pumps - Cooling Condenser - Cooling tower 45 WATT - All pumps and motors European brand - Full PLC automatic control- German automatic pneumatic valves - Steam Boiler 4.5 Ton Line located in Egypt . Evaporator can be sold separately

Condition: good (used), Year of construction: 2011, Automatic unloading line for box pallets. The line is manufactured by MEGA and consists of roller conveyors, a turntable, and a tipper. Suitable for all types of vegetable unloading from box pallets / bins. Kwedpowyliksfx Ad Njt

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 23-034, total width: 1,100 mm, total length: 4,570 mm, total height: 2,060 mm, A packaging machine from the company Smartvac which was exhibited at trade fairs. - Bottom film width: 320(+2/+4) mm Kwodpsq H R Tajfx Ad Not - Top film width: 302(+/-1) mm - Peel length: 220 mm - Deep draw: 100 mm - Machine design for vacuum packs Maximum pack size: 281 x 202 x 100 mm

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm Kwjdpfx Aex Ah A Asd Not - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton Kodpfx Adelatv Ao Nowt - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year 1999 General information: Manufacturer: Kaltenbach Machine type: Automatic saw and drill line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling unit: KALTENBACH APS 1003 Year of manufacture: 1999 Condition: used, fully functional Location: Germany Availability: Dismantling from mid / end of March 2026 Inspection: Machine is in operation and can be inspected under power Sale: without any warranty or guarantee Machine description: For sale is a complete Kaltenbach saw and drilling line for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC and a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross-transfer conveyors. The system is currently in operation and has been used reliably for steel construction up to now. It is ideally suited for economic processing of beams and profiles for both serial production and project orders. Typical applications: - Steel construction / hall building - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-piece production Technical specifications: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre: swivels +45° / –45° to both sides Kwjdjyak Anspfx Ad Nst - CNC-controlled length positioning - Automatic sawing operation Drilling unit APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drilling portal - Suitable for web and flange machining Roller conveyors & material handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Cross-transfer conveyor, infeed: approx. 4,000 mm - Cross-transfer conveyor, outfeed: approx. 4,000 mm Condition: - Complete and fully functional line - Currently in operation - Age- and use-related signs of wear - Sale in as-is condition - No warranty or guarantee Scope of delivery: - KBS 851 DGNC bandsaw - APS 1003 drilling unit - Infeed and outfeed roller conveyors - Cross-transfer conveyors (infeed & outfeed) - Control cabinet / operator unit - Existing protective and safety devices - Documentation as available Dismantling & loading: - Dismantling by the buyer - Dismantling possible from mid / end of March 2026 - On site available: * Forklift * 2 gantry cranes, each with 5 t lifting capacity - Good access and loading conditions

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Kwjdpfxsyaiafj Ad Njt Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Kwodpfjx A Tbwjx Ad Njt Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: not inspected (used), Year of construction: 1983, Complete pellet production line. Made 1983 in DDR. Electrical cabinet, press, mill, cooling line(sieve transporter),cyclones, cooling bunkers 2pc., elevator, mixer. Some spareparts. Kjdpfovukzcox Ad Nswt Loading onto truck negotiable.

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Kedswdfnzopfx Ad Nswt The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Condition: used, mileage: 80,077 km, power: 103 kW (140.04 HP), fuel type: gasoline, gearing type: automatic, axle configuration: 2 axles, first registration: 07/2019, emission class: euro6, color: white, suspension: steel, number of seats: 5, total width: 1,800 mm, total height: 1,608 mm, fuel: regular/benzine 91, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, Active Guard (brake assist), driver airbag, collision warning system with braking function, brake assist, Business package, high beam assist, automatic tailgate operation, LED headlights, storage package, passenger airbag, passenger airbag deactivation, driver/passenger airbags, ambient lighting, anti-lock braking system (ABS), attention assist, body-coloured exterior mirrors, electrically adjustable exterior mirrors, outside temperature display, turn signal indicators integrated into exterior mirrors, check control system, ConnectedDrive Services, black roof rails, wheel theft protection (wheel locks), Driving Assistant, dynamic brake lights, Dynamic Stability Control (DSC), Dynamic Traction Control (DTC), drive experience switch, colour monitor (6.5 inch), Bluetooth hands-free system with USB/audio interface, luggage compartment partition (net), luggage compartment cover/roller blind, cruise control with braking function, 7-speed dual-clutch transmission with Steptronic, interior mirror with automatic dimming, instrument panel - lower section piano black, Intelligent Emergency Call incl. TeleServices, interior trims - high-gloss black, ISOFIX mounts for child seat on front passenger seat, ISOFIX mounts for child seat on rear seat, body: 5-door, 2-zone automatic climate control with automatic recirculation control, rear head airbag system, front head airbag system, enlarged fuel tank, alloy wheels 7.5x17 (star spoke 379 - bicolour), lumbar support for front left and right seats - electrically adjustable, steering wheel (sport/leather), steering column (steering wheel) mechanically adjustable, light and rain sensor, light package, metallic paint finish, rear centre armrest, front centre armrest, model update, Mult., We Buy Your Car! Secure purchase of your vehicle. Let us conveniently evaluate your vehicle. Our specialized team guarantees you the highest possible purchase price. Of course, you can continue to drive your old vehicle until you pick up your new one from us. ... more on our website. Kwsdoyagtcjpfx Ad Not

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS Kwodjhzbipopfx Ad Net 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Sale of 4 complete roll forming lines + 1 spare part. Production of spacers and glazing beads made of aluminum and stainless steel. Modernized lines: two equipped with servo motors, the remaining with cardan shaft drive. Lines feature automatic loading, cutting, high-frequency welding, as well as automatic collection and packaging. Individual lines can be purchased separately. Freely selectable cardan shaft-driven lines at a price of €42,000 per unit / 2 units available. Servo motor-driven lines at a price of €95,000 per unit Quantity: 2 units PRICES FOR A PACKAGE OF 4 LINES + ONE SPARE LINE Price: €299,000 – catalogue price Kjdpfx Aex Da A Rjd Nswt Price: €199,000 – special offer valid until 31 December 2025 Patents valid until 2033 and the HELIMA brand can also be acquired.

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Kjdpfx Aowxv H Djd Newt

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Kwedpfxswuzzrs Ad Njt Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Kodpewuzzfsfx Ad Nowt Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Year of construction: 2015, condition: ready for operation (used), A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Kwjdpfx Adjx Dm D Io Nst

Condition: used, Year of construction: 1986, functionality: limited functionality, type of input current: three-phase, filling weight (min.): 170 g, filling weight (max.): 500 g, Filling line for jars with twist-off lids, comprising: infeed rotary table, Kugler filling machine, upstream jar blowing station (steaming, unique / prototype), capping machine with vibrating hopper for twist-off lids with steaming, including steam generator. Previously used for jars with diameter/filling volume of: 63 and 66 mm for approx. 225 ml // 82 mm for approx. 425 ml. Heated product hopper, optionally with pneumatic transfer cart. Control system completely rebuilt in 2019; new vibration sensor/controller installed. Kwodsw I Awgepfx Ad Njt