Used Conveyer Bellt for sale (65)

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Ksdpfx Afox Hwd Hjfonf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1650x460x120 mm Weight 31 kg Kjdpfxsv A E Rbe Affjnf Total power requirement 0 kw

Condition: used, driven curved conveyor belt. Kedjumvunepfx Affonf Belt width 1400 mmCurve width 3500 mm

Condition: used, Year of construction: 2019, functionality: fully functional, • Rund 20 Meter lang ist die industrielle LISEC Produktionslinie, die in bis zu 350 cm Breite LISEC Transporteinheit 33/40 Pyrosil System 500 HE (Pyrosil application for UV Ink) LISEC Transporteinheit 33/45S Primer Station 500 HE LISEC Transporteinheit 33/68 LISEC Transporteinheit 33/28 mobil Abluftanlage Vorbehandlung LISEC Anlagensteuerung Kedpev Ibmpjfx Affenf Eine gesamte Produktionsanlage besteht aus der Reinigung, der Beflammung, dem Primer sowie den jeweiligen Transportbändern zwischen den Stationen. • Werden nach der Reinigung auf einen mobilen Tisch abgelegt, zum Beladeband gefahren wird, wo das Glas vom Transportband der Produktionslinie übernommen wird. und den Transport durch die Beflammung und den Primer steuert. In der Beflammungsstation wird das Glas mit einer offenen Flamme im Durchlaufverfahren beflammt. Das verbessert die Gleichmäßigkeit der Oberflächenspannung des Glases, verbrennt Rückstände oder Schmutz der beim Waschen nicht entfernt wurde und verbessert mit Silangas die Haftung des Primers. Ein Pufferband transportiert das Glas in die Primerstation, in der aus vier Düsen in hoher Geschwindigkeit der Haftvermittler auf das Glas gesprüht wird. Dann läuft das Glas auf das lange Positionierungsband, dass einerseits als Puffer dient und gleichzeitig das Glas rechtwinklig in exakter XY-Richtung ausrichtet. Die elektonische Steuerung der rund 20 Meter langen Produktionslinie nimmt Rücksicht auf das Format der jeweiligen Glasscheiben bei der Beflammung und beim Primen und überwacht mit Sensoren ihren Transport. • LISEC production line is about 20 meters long An entire production line consists of the cleaning, flame, primer and printing press as well as the respective conveyor belts between the stations. • After cleaning, are placed on a mobile table, which is driven from the printer to the loading belt, where the glass is taken from the conveyor belt of the production line. receives the print jobs from the prepress department and controls the transport through the flame and the primer. In the flame station, the glass is flame-flamed with an open flame in the continuous process. This improves the uniformity of the surface tension

Condition: used, 0 2000 mm Working width 1800 mm Wheel width 200 mm 4 pcs. roller conveyors 2000 x 200 x 1800 mm for internal and external processing Knodexmk Dkopfx Affsf

Condition: ready for operation (used), Two identical Burkle curved belt conveyors are available. Effective width: 400mm, length: 1800mm, feed rate: 37m/min, curvature: 90°. Documentation available. On-site inspection is possible. Kedewydg Iopfx Affenf

Year of construction: 2024, condition: new, The CNC laser machine with two laser heads and a conveyer table? That’s double and non-stop productivity! This laser cutter works with wood, plywood, paper, plexiglass, plastic, rubber, leather, stone, etc. But it's primarily intended to run fabric rolls. Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100–120W laser tube, making it possible to work at fast rates. The conveyer table feeds materials uniformly to the machine, with no folds. You can give our managers a call for additional details! Ksdpeiinlhjfx Affjnf Wattsan 1610 Duos conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Weight: 770 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 1978, used manufactured by Wemhöner type W 85, built in 1978 No. 29 l x w x H ca. mm 2100 x 1200 x  860 about threaded spindle height adjustable chassis lateral moveable infinitely variable adjustable roll distance ca. 150 mm fence left hand located in 97447 Gerolzhofen Knodpfx Afsvwfafjfof sale in current condition

Condition: used, Roller conveyor, length,1500 mm Knjdpfx Asvupd Aeffef - Working width 1300 mm - Overall width ~ 1.590 mm - roller conveyor height 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - Angetrieben nein ohne Antrieb - Length 1.500 mm - Colour schwarz, black - Voltage / HZ 400 / 50 - Location, in stock

Condition: new, Year of construction: 2024, Lights! Camera! Action! This CNC laser machine has a working area of 1600x1000 mm, which is lit by light panels on the sides, and a Canon camera. All for it to majestically operate fabrics, fut, tule, leather, and other materials. The camera recognizes and scans contours and shapes, and then transfers them to the computer. In a special program, the operator can make the necessary changes to the drawing and send it for cutting. Easy and convenient. There is no need for a hand-made lingering process. You can give our managers a call for additional details! Wattsan 1610 Cam conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Weight: 770 kg Ksdperzrmbsfx Affonf Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2001, machine/vehicle number: A 01 02 004/ 0300, - Manufacturer: Venjakob - With dust cover including folding doors - Ventilation via fans - Fully covered under the rollers - Year of manufacture 2001 - Working width 1,300mm Ksdpfxjumvmqj Affenf - Working height: 900 +- 20mm - Roller diameter: 80mm - Roller pitch: 140mm - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet

Condition: used, Roller conveyor, Venjakob, length,1.100 mm - Working width 1.350 mm - Overall width ~ 1.560 mm - roller conveyor height 890 + - 20 mm - Diameter roller 80 mm - Roller pitch 125 mm - all rollers with rubber surface - Feed speed infinitely adjustable by hand wheel 2 - 6 m/min - Length 1.100 mm Knjdpfx Afjumvryefsf - Colour 7035, lichtgrau - Voltage / HZ 400 / 50 - Location, in stock

Condition: used, Roller transport Finnrose 3410mm - Producer Finnrose Knodsumvq Aepfx Affof - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - all rollers with rubber surface - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg

Condition: used, Belt conveyor Aagaard Finnrose, Length 3.500 mm Knjdpfevupfmex Affef with light barrier at the end of the belt for transport stop - Producer MinkDK - Length 1.700 mm - Working width 1.200 mm - Belt with 1.220 mm - Working height 900 + - 30 mm - Length 1.300 mm - FU-controlled Feed speed 2 - 10 m/min - Location, in stock - Voltage / HZ 230/50

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Knsdoumvqcopfx Affjf

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 20,000 mm, Transport Conveyors LISEC Transport Unit 3300 x 4000 mm LISEC Transport Unit S 3300 x 4500 mm LISEC Transport Unit 3300 x 6800 mm LISEC Transport Unit Mobile 3300 x 2800 mm Year: 2010 Pyrosil ST-SystemSt 1000 HD -1B System 500 HE (Pyrosil application for UV Ink) Pyrosil System 500 HE (Pyrosil application for UV Ink) Primer Station 500 HE LISEC Exhaust Air Pretreatment System LISEC System Control S-LTD-235 Flame Parameters: Berner Speed 150 mm/sec 7.4 Hz Frequency at FU Knsdpfjvy D Tiex Affsf 2 Flows Air Setpoint 400 l/min Gas/Air Ratio 1:21 Precursor 0.3% Primer parameters: Primer speed 300 mm/sec, 14.8 Hz frequency at frequency converter Flows: 2 Reservoir pressure: 1 bar Atomizer pressure: 2.0 bar Spray volume: 25 ml/min per spray channel Control pressure below 6 bar has no influence on the spray volume. Only the valves for the spray heads will be opened.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: Ksdpfx Afjukvgrsfenf • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Kodpox H Tilefx Affonf Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 45210 € 863.51 € Schwenkrahmen 3120x27x0,9 mm 20-100 m/min 280 mm 240 mm 310x240 mm rund 230 mm, quadrat 230 rund 140 mm, quadrat 140 rund 200 mm, quadrat 170 240 mm 835 mm 0.37 kW 1.5 kW Kodpewiqwxefx Affjnf 0.12 kW 1.95 Nm 1.95 Nm 2800 mm 2000 mm 1820 mm 1200 kg CNC control with 7" touchscreen for following functions: feeding length, pieces and rotation of the bow for mitre cutting automatic feed 1000 mm / stroke variable cutting pressure machine with speed variator coolante equipment motorizes chip brush chip conveyer automatic saw blade breakage detection hydraulic clamping vices Recommended max. diameter of solid material in automatic mode: 150 mm user manual in English or German

Condition: refurbished (used), Year of construction: 2012, A complete line for the production of wood pellets with a capacity of 1.2 tons per hour from wood chipping and handling to the final product of wood pellet packed in nylon bags. The complete line was designed by Italian engineering company FIDA who also has its own transport equipment, silos and conveyers. All the drawing and schematics and documentation is available. The project was financed by EU and was valued at about 1.3 million EUR which documentation confirms. Compleete line was inspected and refurbished so it is ready for use for many years to come. Its overall operating hours on most equipment is below 500 hours which is practically new equipment. It only requires 2 employes to operate per shift. CHECK EQUIPMENT LIST IN THE DOCUMENTS IN THE ATTACHMENT. 1. Wood chipper and transport conveyors 2. Hammer mill and dozing container and distribution conveyors 3. Drying, rotary drum, furnace, anti-fire pipes, ventilation and storage silo 4. Dust removal, pelleting, cooling and packing (It is about 6 full trucks of equipment) Knsdpfx Afsi Akrksfof The complete line, almost the same as the one on sale, can be seen installed and in operation for reference before installation. More pictures are available on viber and whatsapp. We can also offer service of installing the pellet line. Depending of location and available equipment with the company performing the purchase.

Condition: new, Year of construction: 2025, Description: Suitable for automatic grinding of plane blades, chisel blades, veneer knives, paper knives, and machine knives. Accessories: Paper band filter with Magbeta separator, capacity 300 liters 1 flange and 1 grinding disc 200 mm Ø ceramic. 1 flange for CBN / DIA grinding discs, 200 mm Ø Grinding length: 3100 mm Magnet width: 155 mm Kjdpox E Skrefx Affenf swivel range: 360° Grinding width: 275 mm grinding motor: 11.5 kW n = 1500 Grinding height: about 120 mm Grinding spindle speed infinitely variable: 1500 u/min Grinding conveyer speed continuously adjustable: 3 - 25 m/min Infeed: stepwise 0.005 – 0.2 mm slip ring diameter: 200 mm Connected load approx.: approx. 15 kW (400 V / 50 Hz) Dimensions W x D x H =: 5200 x 1500 x 1900 mm Weight approx.: 2600 kg colour: Blue / Gray

Condition: like new (used), Year of construction: 2019, functionality: fully functional, power: 9.5 kW (12.92 HP), input voltage: 400 V, type of input current: three-phase, Docking station from Kraham Maschinenbau GmbH. U-form DS10 The docking station is used for feeding and transferring pallets, GLTs, mesh boxes, or half GLTs. The system was designed for connection to tugger train systems. It features both infeed and return conveyance of materials and is constructed in a U-shape. !!!THE UNIT HAS NEVER BEEN USED AND IS THEREFORE IN AS-NEW CONDITION!!! Knodpfxex Eiqms Affjf Transport and freight costs are to be borne by the buyer. The system will be made available at a loading ramp. Please contact me if you require further details, photos, or documents.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 100007528, total length: 9,000 mm, total width: 3,000 mm, total height: 1,700 mm, type of input current: three-phase, power: 13 kW (17.68 HP), Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Delivery can be arrange in the Republic of Ireland Ksdpfxjxmi E Hj Affjnf

Condition: used, Year of construction: 2022, Horizon PF-40L folder with table - feed table - 6 folding patterns Knsdjxb Snmepfx Affef - 10 memories for individual jobs - on mobile table - delivery conveyer for up to 1.000 sheets Technical details: - Sheet size: min 125x128 mm; max. 320 x 630 mm - Paper weight : 50-200 g/m² - Capacity: max. 390 sheets/min - Power supply: 230V, 16A - Power consumption: 0,8kW - Weight: 125kg - Dimensions: 1385x625x770mm

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 29800 € 569.18 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 450 mm 425 mm 695 x 425 mm rund 430 mm, quadrat 425 rund 320 mm, quadrat 290 690 mm 0.55 kW 4 kW 0.12 kW 3090 mm 1200 mm 1940 mm 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band Knodpfxswiq Iqo Affsf hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line