Used Continuous Grinding Machine for sale (67,661)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 027.0149, CNC internal and external cylindrical grinding machine S33 CNC – undergoing refurbishment. Gujdpfx Aszcuwbek Ujg Delivery time: approximately 14 weeks. Technical data and accessories as per the attached PDF. Photo = sample photo only.

Condition: refurbished (used), machine/vehicle number: 3439.39, Universal cylindrical grinding machine for external and internal cylindrical grinding. • Distance between centers: 650 mm • Height between centers: 175 mm • Completely overhauled (refurbished) – The machine was completely disassembled and rebuilt component by component. Guide rails were reconditioned, bearings were replaced, new control cabinet and new electrical installation, complete new paint job, and geometrical readjustment for maximum precision. • Equipped with a digital measuring system (Fagor). Gedpfx Akexxy A To Uoug • Machine condition comparable to a new machine, ready for immediate use. • Extensive accessories included in the scope of delivery, as shown in the photos. • Demonstration under power and test run possible at any time. Availability: Available for immediate delivery!

Condition: refurbished (used), functionality: fully functional, equipped with a FANUC 16-T CNC control system. Technical data and accessories are provided in a separate PDF. Guodpfjy Txk Uox Ak Ujg The machine has been completely mechanically overhauled.

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Godpfoz Aax Asx Ak Ueug Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem Gujdpfxorhilxs Ak Uog o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: used, Brand : Estarta Model: 301 Type: Centerless grinding machine Grinding : (Min.) 1’5mm (Max.) 50 mm Grinding wheel dimension 300x175x125 mm Gjdpfx Ajzyx Spsk Ueug

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Crossfeed 0.1 – 20 mm Cross travel rate 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Guodpfoizka Ijx Ak Ueg Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding wheel spindle speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent lift • Electro-magnetic clamping plate L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 piece grinding wheel with flange • Control panel • Lighting • Coolant system with belt filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: good (used), machine/vehicle number: 115 240, center height: 250 mm, grinding length: 1,000 mm, grinding diameter: 500 mm, a very well-maintained used external cylindrical grinding machine with internal grinding capability, SCHAUDT, Type: A 510 N 1000. Gusdpfx Aszz Tkcok Uog Center height: 250 mm, grinding diameter: 500 mm, grinding length: 1000 mm, with multiple grinding wheels.

Condition: used, Year of construction: 2002, grinding diameter 350 mm Gjdpfxszz S Aws Ak Ueug grinding length 1000 mm centre height 175 mm

Condition: used, Year of construction: 2004, grinding diameter 250 mm grinding length 650 mm centre height 125 mm Guodpfx Ajywntysk Uog Maschine wird mit Wartung und neuer Geometrie verkauft Betriebsstunden bisher 12260 Reitstock mit Feinverstellung Schleifspindelstock schwenkbar mit 5° Hirtverzahnung Papierbandfilter Marposs Messeinrichtung Innenschleifeinrichtung

Condition: ready for operation (used), functionality: fully functional, Vertical cup grinding machine DELTA LF 350 -Largest grinding surface approx. 155x360mm -Standard magnetic plate / Eclipse 350x150mm -Max. distance table / disc approx. 280mm -Distance grinding spindle / column approx. 315mm -Spindle speed 2840 rpm -Cup grinding wheel dimensions 200x80x78mm -Drive power 3 kW -Coolant system -Machine enclosure -Grinding wheel guard Gusdpfx Aszz Sxlsk Ueg -Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight approx. 550 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1985, functionality: fully functional, 1 used Iseli surface grinding machine, model EBW-E. Gsdpfx Akjzz Rhlj Uoug

Condition: ready for operation (used), Year of construction: 2005, total length: 600 mm, total width: 600 mm, 600x300mm travel range 600x300mm magnetic table Gedpfszz N A Isx Ak Ujug fully automatic

Condition: good (used), Year of construction: 2006, functionality: fully functional, 10 cup wheels vertical glass grinding machine min. glass size : 40 x 40 mm Godpfx Akezz Hiro Uoug glass thikness : 2 - 30 mm speed : 0,35 - 5,4 m/min. machine dimensions : 7900 x 1200 x 2900 mm worki,g height from conveyor : 850 mm power : 30,5 Kw weight : 4100 kg

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Schleiflaenge 3150 mm Guedpfxedgk H Ao Ak Uog Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 630 mm, grinding width: 200 mm, total length: 2,710 mm, total width: 1,288 mm, workpiece weight (max.): 130 kg, grinding wheel diameter: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 3,200 rpm, overall weight: 1,900 kg, grinding spindle motor power: 2 W, Equipment: CE marking, documentation/manual, The grinder is equipped with a two-axis digital measuring system, Magnenescale LG 20 (formerly Sony), manufactured by Vojus, a.s., Povážská Bystrica, year of manufacture 2000. The machine was manufactured according to CE (European conformity) standards. Accessories: balancer, flanges for grinding wheels, technical documentation. The machine has automatic feed in the transverse working axis; this is the top model from the manufacturer. Technical parameters: Max. grinding length 630 mm, Clamping magnet: 200 x 600 mm, Max. height between the table surface and the center of the grinding spindle: 525 mm, Grinding wheel speed: 3200 rpm, Maximum distance of the spindle axis from the table: 425 mm, Vertical manual feed of the grinding spindle: 0.002 - 0.03 mm and manual: 0.25 (0.5) mm/rev, Grinding wheel (diameter x width x bore): 250 x 20 x 75 mm, Max. workpiece weight: 130 kg, Spindle electric motor: 2.2 kW, Dimensions (l x w x h): 2710 x 1288 mm, machine weight 1900 kg. The grinder is in good technical condition and can be fully tested in our warehouse in Přerov. Gjdpfx Akezz Amaj Ueug

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: Gedpfx Akszycnne Ujug - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: used, Year of construction: 2001, grinding length 900 mm grinding width 510 mm workpiece height 475 mm grinding height 475 mm table surface area 800 x 450 mm table load max. 400 kg total power requirement 9,37 kW weight of the machine ca. 3 t Gujdpfezycmdjx Ak Ueg dimensions of machine L x W x H 3,14 x 1,75 x 2,07 m Accessories: magnetic plate 800 x 450 mm, grinding wheel with flange, wheel trueing attachment, various grinding wheels and flanges separate, wet grinding attachment with band filtration

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Guedpfxezgvlyo Ak Ujg

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller FKS 450-1HNFE sharpening machine, year of construction 1997. Manufacturer: Sigrist & Müller AG Machine type: FKS 450-1HNFE Gusdpfx Akozzyfts Usg Serial number: 1468 Year of manufacture: 1997 year Country of origin: Switzerland The machine is in good condition but has not been used for several years. This machine is CNC controlled and is sold complete with with the guards and accessories shown on the pictures. Please make a reasonable offer per e-mail.

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller Saturn FKS450 tool grinding machine, year of construction 1997. Manufacturer: Sigrist + Müller AG Model: FKS450 Serial Number: 1460 Year of Manufacture: 1997 Godozzydvopfx Ak Usug The machine is in good condition but has not been used for several years. It is sold with the guards and accessories shown on the pictures. Please make a reasonable offer per email.

Condition: used, Surface Grinding Machine JONES & SHIPMAN 540 P Guedpfx Akezzw Tzj Uog Travel X: 480 mm Travel Y: 170 mm Travel Z: 405 mm Mounted grinding wheel diameter: Ø 140 mm Max Grinding wheel diameter: Ø 180 mm Manual magnetic tray Magnetic chuck dimensions: Length 250 mm x Width 160 mm Scale: 2 axes HEIDENHAIN Y and Z Serial number: BO 74221 Manual + automatic Z-axis ascent X and Y auto stepover Voltage: 380 V Width: 1500 mm Depth: 1200 mm Total height: 1800 mm Weight: approx 1,2 T

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Guodpfx Akezx Nynj Ueg Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: ready for operation (used), Year of construction: 2020, Taiwan Palmary Surface Grinding Model : PSG-C60100AHR Year 2020 Max. Grinding surface 1,000mm x 600mm Gjdpfx Akey N Rkxe Usug Electro-Magnetic chuck MPG Overhead Dresser Automatic grinding cycle 0.001mm - 0.03mm auto grind Spindle 1,750 rpm Wheel dia.405x50x127mm Good Operational

Condition: new, Year of construction: 2025, Available from stock! Deburring and fine grinding machine with 3 workstations: Sanding belt - Brush station - Sanding belt Effective maximum working width: 1150 mm Standard workpiece thickness: 0.8 - 150 mm Godpfxepwh Tfo Ak Ujug Digital workpiece thickness display on the control panel, accuracy 0.1 mm Adjustable pressure rollers before and after the workstations Sanding belt insertion on the left Sanding belt centering via electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely adjustable conveyor feed speed Includes the following options: Machine base prepared for forklift loading Extraction collector in galvanized sheet metal for machines with 3 work stations plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces to the conveyor. With perforated feed table and carpet, as well as a powerful electric fan and sound-insulated exhaust according to CE standards, 5.5 kW 2x grit sets for electronic fine positioning of the contact rollers Adjustment and display (0.01 mm) on the control panel, standby position with pneumatic reset of the contact roller in the event of an emergency stop Frequency-controlled drive motors for sanding belt cutting speed, motor power per unit 11 kW Electronic adjustment of the brush unit HMI Vision - PLC control with visualization of the various machine settings via color touchscreen Storage capacity for up to 250 sanding programs