Used Contactor for sale (212)

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN347467, functionality: fully functional, Chamber furnace, fully overhauled, 12-month warranty -Maximum temperature 650 °C -Internal dimensions W x D x H: 600 x 750 x 600 mm -External dimensions W x D x H: 1250 x 1700 x 1750 mm -Capacity: 250 liters -Nabertherm controller -Pneumatic lift-up door -Heating time to maximum temperature: 90 minutes -1 bottom plate -1 internal plate (3 additional plates available at an extra charge) -Additional thermocouple (batch thermocouple) -Extra 50 mm feedthrough -No exhaust, no controlled cooling -Weight: 650 kg -Power consumption: 20 kW -Documentation, CE declaration Dwodpfx Ao Aivvhslfed -Electrically tested and with current DGUV test report The furnace has been overhauled. All contactors and relays have been replaced. Heating elements have been inspected and measured. Very good condition. Inspection by appointment. Furnace, furnaces, muffle furnace, industrial furnace, chamber furnace, firing furnace, sintering furnace, annealing furnace, laboratory furnace, hardening furnace, ceramic furnace.

Condition: used, functionality: unexamined, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Dodpfxszhnyro Alfowd More than 10 units available Manufacturer: Siemens Model: 3TC5617-0A Type: Power contactor Rated voltage: 230 V AC Rated operating current: 40 A Frequency: 50/60 Hz Contacts: 3-pole (3 normally closed) Mounting type: Screw or DIN rail mounting Function: Switching of motors, heaters, or industrial loads Series: Sirius

Condition: good (used), functionality: fully functional, Function-tested; item originates from dismantling of a system from an automotive supplier Manufacturer: Siemens Model: 3TC5617-0A Type: Power Contactor Rated Voltage: 230 V AC Rated Operational Current: 40 A Dedpfx Aloyq Sbtofjwd Frequency: 50/60 Hz Contacts: 3-pole (3 NO) Mounting: Screw or DIN rail mounting Function: Switching of motors, heaters, or industrial loads Series: Sirius

Condition: used, Siemens SIRIUS power contactor with two mounted auxiliary switch blocks, 3RH1921-1JA11 and 3RH1921-1DA11, for industrial switching and motor applications. Manufacturer: Siemens Product series: SIRIUS Type: 3RT1056-6AP36 Device type: Power contactor Number of poles: 3-pole Rated operating current Ie AC-1: 215 A Rated insulation voltage Ui: 1000 V Rated operating current Ie AC-3 at 230 V: 185 A Rated operating current Ie AC-3 at 400 V: 185 A Djdpfezupbkjx Alfewd Rated operating current Ie AC-3 at 690 V: 170 A Rated operating current Ie AC-3 at 1000 V: 65 A Motor power AC-3 at 230 V: 55 kW Motor power AC-3 at 400 V: 90 kW Motor power AC-3 at 690 V: 160 kW Motor power AC-3 at 1000 V: 90 kW Standard: IEC/EN 60947-4-1 Auxiliary switch block 1: Siemens 3RH1921-1JA11 Auxiliary switch block 2: Siemens 3RH1921-1DA11 Rated insulation voltage of auxiliary switch blocks: 500 V AC-12 at 230 V: 10 A AC-15 at 230 V: 6 A

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. Dwedpfx Ajyw Rzajlfsd The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION Dedozfyu Ajpfx Alfewd The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Dwsdpfxozlktpo Alfed Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: new, SIEMENS contactor 1st type - 3 TF 46 - 3 pieces 2nd type - 3 TF 48 - 1 piece 3rd type - 3 TF 54 - 1 piece 4th type - 3 RT 1054 - 1 piece 5. type - 3 RT 1075 - piece 6. LC 1D 65008 - 1 piece Dwedpfx Alsu U Ulgefed

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Dwsdpfx Asy Szflelfed Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories Dodpfotywzqjx Alfowd 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: used, 5 5 kW as good as new Dodpfxszrxqio Alfjwd

Condition: used, Year of construction: 2015, functionality: fully functional, This is a 100-liter electric tilting, rapid-cooking kettle from the premium manufacturer MKN, type Optima 850. After a comprehensive inspection, the unit is in flawless, good used condition, with a 6-month warranty on all electrical parts. !!! Price upon request !!! You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1200 x 850 x 700 mm Inner kettle: Diameter 665 mm, 500 mm deep Power connection: V: 400 / kW: 21 Weight: 225 kg Serial number: 15202757 Type: 2023007S Nominal capacity: 113 liters Usable capacity: 100 liters Year of manufacture: 2015 Electromotive tilting device with hand switch Inner kettle: Ø 630 mm, 397 mm deep, material 1.4404 Heating time: 26 min. Power selector switch Limit switch Temperature controller Safety temperature monitor Indicator lights Tube heating element Pilot heating element Dedpfx Als Af Itvefjwd Contactor Water solenoid valve Level controller with level electrode Electrical fixed connection IPX5 Fittings: Vent and bleed valve, safety valve Condition: Used, major inspection carried out, fully functional Further information: Double-jacketed kettle with separate, integrated and maintenance-free steam generation system VAPRO for rapid heating times and low energy and water consumption as well as high efficiency Short heating times thanks to the rapid steam system VAPRO - protects the food and saves time Automatic monitoring and replenishment of operating water, ensuring constant readiness for operation Standard equipment with 3 cooking levels (gentle simmering, medium and strong boiling) Thermostatic or electronic temperature control Standard with double-walled hinged lid and mixing tap The tilting angle of the kettle of more than 90 degrees makes pouring, emptying and cleaning easier Ideal kettle support prevents the pouring jet from shifting and guarantees complete emptying The large pouring height allows for problem-free emptying into larger containers All fittings and instruments are integrated into the side frame Tilting manually or electromotively Standard prepared for connection to an energy optimization system with a potential-free contact Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions.

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive Djdpfxszvh D Ho Alfowd CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: excellent (used), Protective control unit Polu Box Manufacturer: DEMAG Includes documentation Dwjdef Ey Edspfx Alfod

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, STORTI FLEX + GSI 150 Automatic Pallet Nailing Line (Robotics and High Production) GENERAL DESCRIPTION: A complete, highly automated industrial installation for manufacturing wooden pallets and pallet tops is available for sale. The line combines the structural and hydraulic robustness of STORTI S.p.A. with modern technological and robotic upgrades. The facility is currently fully operational, having recently undergone a comprehensive overhaul and critical maintenance procedures. Dwsdpfsz Sfbnex Alfod TECHNICAL SPECIFICATIONS AND COMPONENTS: The line features an advanced, fully interconnected modular architecture: Module / System Technical Model Key Features Year Central Mechanical Nailer STORTI FLEX 50M High-speed, heavy-duty monoblock gantry. 9 independent nailing heads, brushless synchronous servomotors, and a multi-format oscillating hopper. 2014 Robotic Cell ROBOT WORK-STATION 2-axis robotic station for handling and pneumatic 90° rotation of pallet tops/decks. 2014 Cartesian Robots 3 Units Integrated Cartesian systems for workflow automation. 2014 Hydraulic Nailer STORTI GSI / 150-TA Heavy-duty assembly core. Equipped with 24 nailing heads, a frame with multi-format molds (7 molds), and an 11 kW hydraulic power unit (60-65 bar). 2004-2006 Block Dispenser STORTI DAT / 2000 Automatic block/stringer feeder using a high-friction belt and pneumatic actuators. 2004-2006 Outfeed Mechanization – MODULE 7 (Storti) Finishing line including: Corner cutter (GSM/3), board milling machine, marker/stamper, pallet turner (GSA/180), and automatic stacker (AGS/230). Transfer Units STORTI GSD 4 FLEX Angular transfer unit featuring rollers and lifting chains. • Format Capacity: From a minimum of 700 x 700 mm to a maximum of 1500 x 1500 mm. • Electronics and Control: Centralized via HMI touchscreens (Schneider Electric Magelis / ESA VT100) and Schneider Lexium servo-drive technology using the CANopen protocol. RECENT MAINTENANCE HISTORY The machine is in excellent condition thanks to a comprehensive overhaul that includes: • Replacement of the gantry servo-motor cable. • Replacement of alignment bushings on the Flex 50 legs and installation of new hammers (4 units) with their respective pins. • Repair and tuning of the pallet front-cutting saw and the pneumatic cylinders for the milling units. • Repair of the tilting conveyor shaft and welding/turning of the gantry turner drive shaft. • Replacement of optical sensors, mechanical sensors, and magnetic contactors.

Year of construction: 1976, condition: used, machine/vehicle number: WR2, Demag overhead crane Crane canopy Crane runway Indoor crane Crane Payload / lifting capacity 5t - 5000KG, track 13900mm Outer dimension with endcarriage approx. 14000mm Rope hoist P-pull P412 M11 - 4 strand with fine lift Year of manufacture 1976 with floor control Overall height top edge of crane to hook approx. 1000mm Endcarriage length with buffer approx. 3000mm Lifting height rope hoist 5500mm Weight approx. 3200KG Dedpfx Ajrnmzzslfowd Control system overhauled, new contactors etc. installed, cable towing with towing chain added Crane is dismantled, available immediately from location 79664 Wehr. Inspection book is available Good used condition Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please ask for zip code Collection preferred

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump Dsdpfxov Iflpj Alfowd • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm Dwodpfx Aloz I Ub Hefjd feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) Dsdpfx Aleyt Iprjfewd · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller · Heaters, level switches, and power contactors have been replaced. · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting Dwjdpfxsv Tzw Ej Alfsd - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm Dwedpfx Asz Nmfbjlfsd • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Year of construction: 2019, condition: new, functionality: fully functional, Root reducer – new (in storage) consisting of: 1. Tapered roller conveyor Plant data: Wood lengths: 2 m to 4.6 m (main length: 2.7 m), extendable to 8 m (optional, at an extra charge) Log diameter: 200 mm to 1,100 mm Wood types: Softwood or hardwood, max. individual log weight 2 tons Piece rate: up to 5 pieces/minute, of which with root reduction: up to 2 pieces Operation: 1-shift operation Dimensions: Length: approx. 5 m Roller width: 800 mm Description: Tapered roller conveyor for roundwood with housing bearing (nominal diameter: 60 mm); Outer diameter of the tapered rollers: 450 mm; drive chain: roller chain 5/4"; integrated 4-arm, hydraulic lifting device for transferring to the root reducer, steel housing plain bearing; drive of the tapered roller conveyor via gear motor with reduction gearbox and soft start; integrated light barriers (2 pieces) for log positioning 2. Root reducer Dimensions: Length: approx. 7 m Description: - 3 driven chain beds, drive chain: roller chain 6/4" with square tooth attachment - Drive via gear motor - 2 support blocks with non-driven rollers (roller bearing) - hydraulically pivoting clamping device for clamping from above with V-bed - Drive chain: roller chain 6/4", drive via gear motor; - housing-mounted milling shaft with reversible, interchangeable knife blocks (4 cutting edges per knife block), drive via three-phase motor (drive power: 75 kW; flexible tire coupling) - Star-delta operation for the drive motor (energy-saving mode for idle operation - automatic switchover during the reduction process) - Milling shaft length: 1,200 mm, mounted on a rotatably supported, adjustable drive rocker (hydraulic drive) - 4-arm lifting device, hydraulically driven - integrated hydraulic unit (15 kW) - integrated log diameter measurement for automatic milling time calculation (control unit included in item 2), for wood lengths under 3.5 m, the support position of the log must be adjusted (reduced reduction length) Reduction length for log length of 2.7 m: 0.7 m, for log length of 3 m: 0.9 m 3. Control system - Control cabinets in grounded design, equipped with control units for all drives of items 1 and 2, - Power supply: 3x400 VAC; Rittal control cabinet; motor contactors and contactors from Siemens - Freely programmable controller Bernegger & Rainer - Control cabinets completely wired and tested - Reserve slots for approx. 5 drives Dedpjzcaqtsfx Alfowd - Circuit diagram for the system - Signal exchange via potential-free contacts - Emergency stop system; including necessary sensors; manual operation option Control function description: - Automatic reduction operation, for log lengths under 3.5 m, an adjustment of the support position (wood alignment) is required (reduced reduction length) - Automatic log positioning via the tapered roller conveyor, the reduction process must be activated manually (reduction command) Price: ex works

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL Dodpfjxxrnbsx Alfjwd # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch Dwedpfx Alsfipfuofsd ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used, but in very good condition.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Djdozyc Riepfx Alfewd The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.