Used Capacitor for sale (54)

Condition: new, Indramat TCM 2.1-02-7 A.C. Servo Capacitor-TCM , unused, good condition, 100% functional Dkedpfx Ahji Ebmmo Ien

Condition: ready for operation (used), Fanuc A06B-6083-H218 Capacitor Module Version: A SN:V03202439, used, normal signs of use, 100% functional, scope of delivery as per photos Dodpfx Ahjtvctqs Iokn

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: MB 0484 / 2014, type of input current: three-phase, continuous power (apparent): 10 kVA, type of cooling: air, total width: 1,119 mm, total length: 2,595 mm, total height: 2,510 mm, overall weight: 1,700 kg, For sale is a capacitor discharge welding system (CD welding system) from the brand GLAMATRONIC, model GKS-S4/12-Q, manufactured in 2015. The system is in good condition and is suitable for industrial welding applications with high process reliability and precise energy output. The system has been regularly maintained and is immediately ready for operation. The control cabinets are equipped with additional air cooling. Technical data: Make / Type: GKS-S4/12-Q Year of manufacture: 06/2015 Rated voltage: 3 x 400 V AC / 50 Hz Control voltages: 230 V AC / 24 V DC Rated power: 10 kVA Dkedpoy Rmk Dsfx Ah Ion Welding energy: 4 kJ Welding force: 12 kN Max. supply line fuse: 32 A Frame weight: approx. 1,700 kg Control cabinet weight: approx. 1,000 kg

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide Dkedpfoguvtdex Ah Isn - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Dksdpfxjguvtas Ah Ion Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: new, Year of construction: 2026, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, Technical Data: X, Y axis travel range: from 600 x 900 mm up to 2100 x 2100 mm Z axis range: up to 500 mm Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, 2 ms sampling time, optional: RTCP tool tip tracking, correction map Drive system: Servo drives with EtherCat protocol, X, Y axes with precision-ground helical racks (accuracy class 6), Z axis with precision-ground ball screw (accuracy class 5) Linear guides: Trapezoidal rails Traverse speed: Up to 90 m/min Software resolution: up to 0.0001 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave with gantry angle correction Automatic head: SK type Material: Steel, Stainless Steel, Aluminum, Brass Dodpfx Aev T Uy Teh Iskn Welding range: Ø 3 - M 8 Stud welding range: M 3 x 6 - M 8 x 40, 50 to 100 Volt, fully adjustable, accuracy ± 1 Volt Ball bearing Min. tolerance / 490 Ws at 99 V Stroke: Pneumatic 50 mm Weight: 1.5 kg (without cable) Option: CNC capacitor discharge stud welding MULTI-HEAD

Condition: ready for operation (used), Year of construction: 2010, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Process/software features: NoLine, PowerLine, ContourLine, Laser power control, Programmable cutting pressure, Program repeat, Automatic blow-off, Work interruption lighting, Hole-punching function (laser) • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit Djdpjx D I H Djfx Ah Ijkn • Cutting head: Laser cutting head with 155 mm lens • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Capacitor power 1600 N/cm², Safety with macro stops Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 216 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • LoadMaster Tube 6 m with belt support, 2 grippers • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: new, Bosch KM 2200-T 1070048799-307 capacitor module, S.-No. 005014224, unused, with accessories, 100% functional Djdsi D T U Rspfx Ah Ijkn

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Dkjdpfxswwgvys Ah Ien Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, secondary voltage: 15,000 V, Two cast resin dry-type transformers, FRANCE TRANSFO SCHNEIDER ELECTRIC, with Schneider Electric low-voltage capacitor banks and a Rectimat 2 panel for each transformer. 1250 kVA and 800 kVA / 15,000 Volt / 15 kV. Manufactured in 2003 and 2002, in like-new condition and excellent working order. €10,000 for both transformers, loaded onto your truck. Price negotiable. Dksdpfxjzbhmte Ah Ijn

Condition: new, Brand new electric actuator from the renowned German manufacturer AUMA. Professional device designed for industrial automation, suitable for the operation of valves, gates, dampers, and other industrial fittings. The actuator is in stock condition – unused. Robust industrial design with a manual emergency handwheel and high ingress protection class IP68. Technical data: Manufacturer: AUMA Riester GmbH & Co. KG Model: SAR 07.6-F07 Order number: 13384379 Serial number: 1417MD37537 Output speed: 22 rpm Closing torque (T zu): 30–60 Nm Opening torque (T auf): 30–60 Nm Protection rating: IP68 Operating temperature range: -30°C to +70°C Lubrication: F15 Motor data: Motor type: VE0R048-2-0.120 Power: 0.12 kW Supply: 1~ 220-240V Frequency: 50 Hz Current: 1.8 A Capacitor: 25 µF Cos φ: 0.97 Motor speed: 2800 rpm Duty cycle: S4-25% ED 1500 c/h Djdpfx Ahsy Su Ero Iskn Insulation class: F Thermal protection Protection rating: IP68 Applications: - Industrial automation - Valves and dampers - Water and process installations - Power generation - Chemical industry - Industrial fittings control systems

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins Dkodey R Ergjpfx Ah Ien • Renovation of industrial surfaces Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding Dkjdpfx Ajy Stahjh Ijn User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal Djdjv T Truepfx Ah Ijkn working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: ready for operation (used), Year of construction: 2023, Low usage machine. Operational condition. Dedey R Szuspfx Ah Ijkn PWB size: 50mm×50mm – 410mm×360mm Compontents: 0402/ 0603(metric), Cylindrical chip, tantalum capacitor, transistor, SOP / QFP,etc.

Year of construction: 2011, condition: used, Designation: Battery Simulator Manufacturer: Kratzer Model: VES2 150KW 600V +/- 600A Battery Simulator / Vehicle Energy System · Highly dynamic, bidirectional converter for e-mobility component testing in the automotive industry · IGBT technology, water cooling · Grid connection with feedback capability and low grid interference · Galvanic isolation with medium-frequency transformers · Selectable control schemes and user-defined control parameters for adaptation to a wide range of test scenarios · Integrated simulation module for emulation of resistors, batteries, and capacitors · No switching time between source and sink operation Dkodpfx Ajy Nzaksh Ion · Low noise due to high switching frequency and water cooling Item condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The specified shipping costs apply to deliveries within Germany Worldwide shipping (please enquire for shipping costs outside Germany) The given shipping costs apply to a shipment within Germany Sale to business customers only, without warranty or guarantee. Technical data deviations and errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright/Elektron, relay contactor -Type: SW201-3 -Voltage: 48 V -Number: 5x contactors available Dkodpfxoy At Ruo Ah Isn -Price: per piece -Dimensions: 155/75/H80 mm -Weight: 1.5 kg/pc.

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available Dsdpfx Ahoy Aty Aj Iekn -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: EB16649 F99, overall weight: 231 kg, input voltage: 230 V, rotational speed (min.): 12 rpm, rotational speed (max.): 36 rpm, Equipment: rotational speed infinitely variable, The 1224 model performs threading on a wide range of pipes, including black steel, galvanized, and plastic-coated pipes, as well as stainless steel conduit, IMC, heavy-wall conduit, and rods with a hardness of up to 30 Rockwell C. Features Dkjdpfsy Hu Iiox Ah Isn • Induction motor for minimized noise. • Special motor with auxiliary winding and capacitor start allows the 1224 model to thread a wide variety of materials, even in cases where voltage drops have been experienced. • Universal die head 1/4” - 2”; retractable die head 2 1/2” - 4” allowing the production of NPT/NPSM or BSPT/BSPP tapered or parallel threads. • Adequate and consistent oil lubrication of dies and workpiece through the head. Technical specifications Nominal pipe capacity: 6 mm - 100 mm (1/4” - 2”) at 36 RPM, 65 mm - 100 mm (2-1/2” - 4”) at 12 RPM, 100 mm - 150 mm (4” - 6”) with 161 geared threader attachment. Bolt capacity: 6 mm - 50 mm (1/4” - 2”). Motor control: Heavy-duty Forward/Off/Reverse with integrated foot switch. Gearbox: Two-speed gear box with a 3:1 ratio. Chuck: Hammer-type chuck with replaceable rocker jaw inserts. Rear centering device: Cam-operated. Oil pump: Self-priming, gerotor-type, automatic-reversing, constant-flow. Lubrication: Through the die head.

Condition: good (used), Thread Cutting Machine Berg + Schmid Delta 4 Product Description Cutting range: R 1/3 - 4", M8-M52 Powerful capacitor motor 230V-1 kW, exceptionally quiet operation 3 speeds: 15+27+58 rpm (also under full load, built-in gearbox) Dedpjyy S Efjfx Ah Ijkn With 2 automatic thread cutting heads: R 1/2 -2", R 2 1/2 - 4" Complete with cutting dies: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", conical DIN 2999 Automatic cooling directly through the cutting head Quick-release chuck, pipe cutter, internal pipe reamer Includes occupational safety equipment with safety foot switch and 4 support legs

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding Dksdjy Au Aljpfx Ah Ion • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Dkjdpjywztgsfx Ah Ien Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M6 Endermolab 1I or opt. 2I Beauty and Therapy Device Body and Facial Device (new) Endermo Lift (Ergo Lift) Latest world patent for facial treatments Tested by certified trainer (Beauty and Therapy) Completely refurbished and overhauled Recently serviced New hose Overhauled KM80 Roll Head from 2013 New KM70 Roll Head or Therapy Head TR50 New KM50 Roll Head New controller from previous owner Device has been recently overhauled New valves, seals, and hose New capacitors, new filters, etc. Original price: €39,980 net Suitable for Endermologie Body and Endermologie Face treatments Optional upgrade to Ergo Lift patent 2014 for an additional €2,000 Lipo-massage and Endermolift technology performable Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual specifications Optional starter package (bodywear, filters, claps, flyers) A premium device in the upper class of the Medical Beauty segment! No low-quality devices like ultrasound or radiofrequency products from China— Ergodrive, Ergo Lift included 12-month warranty from date of purchase, valid only with a 2-day training course including final exam Start your Endermologie season now! 100% natural mechanostimulation ensures a painless yet intensive treatment. A highly addictive procedure. Customers seek to strengthen and firm connective tissue, reduce cellulite, and men seek abdominal firming. My clients generally lose 2 dress sizes, and it has been scientifically proven to stimulate metabolism. Hooded eyelids and double chin can be positively affected with Endermolift. This patented procedure is as precise as a Swiss watch. For the past 18 years, I have used and traded older LPG pre-owned devices; the results of the latest generation led me to add the latest Integral and its sister model Endermolab as well as the Alliance model to my offering. We support you with application questions even after purchase. Facts about LPG 40 years of experience Worldwide market leader in the medical beauty segment European company Dkedpfx Aocgy Hdeh Isn 175 documented clinical and scientific studies 80,000 devices produced 100 countries presence 12 million treatments performed 200,000 treatments daily Leasing available through our partner bank E.g. from €399 per month Images for reference—constantly new devices available We value our customers even after the sale! Nationwide references available Doctors, therapists, beauticians, etc.

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V Dedpfxjya D Sve Ah Iskn • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK 40

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Dkedpfx Ahjcpwhbs Ijn Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.