Used Construction Sites for sale (22,179)

Year of construction: 1997, condition: used, Year of manufacture: 1997 Fsdsz I Aaqspfx Akyegh Field of application: Internal logistics Please contact Theo Lelie , , ) for more information

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 570 h, load capacity: 230 kg, empty load weight: 6,300 kg, construction height: 2,470 mm, fuel type: diesel, total length: 4,440 mm, drive type: Diesel, arm reach: 9,100 mm, construction width: 2,320 mm, working height: 16,000 mm, Articulating Boom Lift Condition: As new Fedpfxsz Iulxj Akyegh Technical Condition: Very good Front Tyre Type: Solid rubber Front Tyre Size: 18 Front Tyre Condition: 80 - 100% Rear Tyre Type: Solid rubber Rear Tyre Size: 18 Rear Tyre Condition: 80 - 100% Description: The Manitou 160 ATJ articulated boom lift is ideal for outdoor operations on uneven or unpaved surfaces such as construction sites, gravel, or grassy areas. With a lift capacity of 230 kg, an articulating height of 7.38 m, and a working height of 16 m, it offers extensive outreach. Its diesel engine, combined with four-wheel drive and three steering modes, provides the 160 ATJ with outstanding performance and autonomy.

Condition: used, machine/vehicle number: 91671501, Year of construction: 2023, operating hours: 2,803 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Own weight: 1,500 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,803 h EQUIPMENT Battery charger Road traffic regulations (StVZO) lighting Direction indicator Road approval Fsdpfx Asz Iwvyokyogh Formerly a Jungheinrich full-service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 373

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Fjdpfx Akjz Iw N Teyegh Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. Fjdpfx Akeq N Ud Ijysgh - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Year of construction: 1994, operating hours: 3,689 h, condition: used, Schliesing MX 660 Wood chipper on a tandem-axle chassis Fedpfx Aez Hidyjkyegh > Hatz 4L40C diesel engine > Tandem-axle chassis with brakes > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Road approval = Further information = Please contact Tobias Ebert for more information.

Condition: used, machine/vehicle number: W4X133X02132, Year of construction: 2020, operating hours: 3,929 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,574 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 800 x 1,315 mm Self-weight: 1,500 kg Battery year of manufacture: Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Rest voltage: 24.9 V Service contract valid until: 03/2027 Operating hours: 3,929 h EQUIPMENT Formerly a Linde full-service unit Initial lift for double-stack operation Fsdpfx Asz Iwu Nekyogh Increased ground clearance for uneven floors All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 371

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 766 h, load capacity: 500 kg, arm reach: 7,500 mm, working height: 15,900 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 15.90 m Lateral reach: 7.50 m Basket rotation: 90° + 90° Fgodpfx Asz Hz D Sokyoh Dimensions of aluminum basket: 1,200 × 700 × 1,100 mm Power outlet in the basket: 230 V Power outlet in the basket: 12 V Turret rotation: 700° Number of base plates: 4 MACHINE DETAILS Payload: approx. 500 kg Carrier vehicle: Piaggio Porter Operating hours: 766 h EQUIPMENT Hydraulic basket rotation Front basket mounting Pipes and cables installed in the boom Automatic closing of the boom section Automatic stabilization Lateral outriggers H + H with extra lift Automatic stabilization control from the basket and from the ground Proportional electro-hydraulic control with speed regulation of all movements Automatic engine speed regulation Possibility of simultaneous operation Display for centering the boom section in the basket Electronic CAN-BUS management system Powder-coated cataphoresis treatment Coming-home function Outline lighting for boom and turret Socage Connect Painting of boom and column parts in white, RAL 9016 Frame painting in black, RAL 9005 Painting of head and hydraulic cylinder in blue, RAL 5015

Condition: new, mileage: 1 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck | 245 HP | Euro 3 | Carrier The Mercedes-Benz Atego 1725A 4x4 Refrigerated Truck is configured for reliable temperature-controlled transport on demanding delivery routes. Its 245 HP Mercedes-Benz six-cylinder Euro 3 engine, 4x4 all-wheel drive and insulated GRP refrigerated body with Carrier cooling system provide a practical solution for professional cold-chain logistics. Key Highlights - Mercedes-Benz Atego 1725A/42 4x4 - Mercedes-Benz 6.4L 6-cylinder Euro 3 engine - 245 HP (180 kW) - Mercedes-Benz G 85-6 manual transmission - Mercedes-Benz VG550-3W transfer case - Front and rear differential locks - Approx. 5,000 mm refrigerated body - GRP insulated sandwich-panel construction - 50 mm side-wall and roof insulation - 80 mm insulated floor - Carrier refrigeration system - Twin insulated rear doors - Aluminium interior floor and cargo lighting - 210-litre fuel tank - Air conditioning Built for Cold-Chain Distribution The refrigerated body uses insulated GRP sandwich panels to help control heat transfer during transport. The side walls and roof use 50 mm insulation, while the floor incorporates 80 mm insulation with a durable aluminium upper surface. Twin insulated rear doors and dedicated sealing support temperature-controlled cargo operations. The 4x4 drivetrain, Mercedes-Benz transfer case and front and rear differential locks provide additional mobility on unpaved roads, loose surfaces and demanding regional delivery routes where conventional 4x2 refrigerated trucks may be restricted. Applications - Food and beverage distribution - Fresh produce and agricultural logistics - Meat, seafood and dairy transport - Remote and regional cold-chain logistics - Mining and construction-site catering supply - Pharmaceutical and temperature-sensitive transport Technical Specifications Vehicle: Mercedes-Benz Atego 1725A/42 Body: GRP Refrigerated Body Drive: 4x4 Engine: Mercedes-Benz 6.4L 6-cylinder Euro 3 Power: 245 HP / 180 kW Transmission: Mercedes-Benz G 85-6 manual Transfer case: Mercedes-Benz VG550-3W Wheelbase: 4,160 mm Internal dimensions: 4,892 x 2,400 x 1,940 mm Refrigeration: Carrier Fuel tank: 210 litres Cab: Mercedes-Benz S-Cab Fgsdpfx Aoy Rt Ucekyjh Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania commercial vehicles for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in refrigerated trucks, heavy-duty vehicles and specialised transport solutions, we provide complete vehicle solutions for customers across Africa, the Middle East and other export markets. Contact our team for availability, export options and worldwide delivery. Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Availability: in stock Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg

Condition: used, machine/vehicle number: H2X392V00600, Year of construction: 2018, operating hours: 8,030 h, load capacity: 2,500 kg, lifting height: 4,600 mm, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,600 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Fjdpfjz Iwm Ejx Akysgh Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,200 mm Weight: 3,950 kg UVV certificate valid until: 05/2027 Next service due in: 470 hours Operating hours: 8,030 h EQUIPMENT Full free lift 3rd hydraulic valve Side shifter Full cabin without driver's door Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat Lumbar support Seat heating Display of the tilt angle Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 105

Condition: used, Year of construction: 2001, Techmatic circulation system: - elevator Fsdeyylr Sopfx Akyogh - lowerator - finger car turning - 16 floors double pallet 1400x1100 - cuber - doubler - center year 2001

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Fodez Iwimjpfx Akysgh TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Drive type: Diesel Number of wheels: 6 Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Own weight: 17,510 kg Protective roof height: 3,000 mm UVV certification valid until: 08/2027 Starter batteries renewed: 01/2025 Operating hours: 3,410 h EQUIPMENT Former Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork adjuster Side shifter Full cab Air conditioning Heater Windshield wiper Multi-function display with touch function LED work light, front LED work light, rear Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light, rear Motec camera with view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1

Year of construction: 2006, operating hours: 7,913 h, condition: used, Terex Pegson AX 877 E/M Trak jaw crusher, year of manufacture: 2006, operating hours: 7,913, engine: CAT [149 kW/200 hp], magnetic separator, 80% chain undercarriage, remote control, weight: 29,390 kg, German machine On request, we are happy to offer you a leasing or financing package. Mr. Mihm (phone) will be pleased to assist you. More information is available on our website. Errors and prior sale excepted! Fsdszwluxspfx Akyjgh = Further Information = Please contact Tobias Ebert for more details.

Condition: used, machine/vehicle number: 91671431, Year of construction: 2022, operating hours: 423 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Traction force: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 375 Ah Battery type: 3 PzS Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 2,200 mm Own weight: 1,500 kg Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 423 h EQUIPMENT Cabin Windshield wiper Fsdpfxoz Iwv To Akyogh White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Safety light at the front formerly a Jungheinrich full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 388

Condition: used, machine/vehicle number: W41190V00204, Year of construction: 2019, operating hours: 2,919 h, load capacity: 5,000 kg, overall weight: 1,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated pulling force: 5,000 kg MACHINE DETAILS Battery voltage: 24 V Battery capacity: 500 Ah Battery year of manufacture: 2019 Battery voltage in idle state: 25.0 V Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,400 mm Dead weight: 1,000 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,919 h EQUIPMENT Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Fgedpfsz Iwvmsx Akysh Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 372

Year of construction: 2015, condition: used, Technical information Power: 1 kW (2 HP) Empty weight: 392 kg Functional Dimensions of cargo space: 110 x 110 x 220 cm CE mark: yes Condition General condition: good Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: IT Additional information Fgsdpfez Ildfsx Akyjh Please contact Christian Theißen for more information Manufacturer: Generac Tower Light Model: CTF 10 Mt Year of build: 2015 Condition: Used Data: Max. height: 10,00 m Performance: 1,6 kW Location: 41468 Neuss: Available immediately Lamp type: Metal Halide Illuminated area: 2.800 m² Light output: 144,000 lumens Required connection: 1 x 230 V / 16 A CEE Drive type: 230 V Operating noise: 0 dBA (0 LWA in dB) Transport dimensions LxHxW: 1,10 x 1,10 x 2,20 m Dimensions when set up: 2,32 x 2,32 x 10,00 m Empty weight: 392 kg Location: 41468 Neuss immediately available

Condition: like new (used), Year of construction: 2008, Tipping Device and Concrete Spreader VOLLERT WECKENMAN Year 2008 Never used Lifting device capacity: 5 tons. With synchronized control Concrete spreader cover: 7.5 tons, with internal blade auger In perfect condition Fedpjxza Nfsfx Akyegh

Year of construction: 2022, condition: used, New: Yes Empty weight: 2.100 kg Dimensions of cargo space: 606 x 244 x 259 cm Fedpfxsz N Ruts Akyogh Serial number: 1774685 Please contact Team DPX for more information New CSC plated 20 Ft container Including forklift pockets Inside dimensions ca: 5898x2352x2393

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 450 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 495 mm, workpiece weight (max.): 200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, controller model: TNC 640, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotary table diameter: 320 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 5AX 320 5-axis simultaneous machining center with a cross table design stands for highest precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical features: Control system: • HEIDENHAIN TNC 7 digital control system • HEIDENHAIN 19" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated strip chip conveyor ✔ Full enclosure with side-opening viewing windows Fgodpsh Ekqyjfx Akyjh ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: used, functionality: limited functionality, Year of construction: 1990, Electric drilling rig. New electric motor. Fgodpfx Akjy Skwqjyeh

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Fgsdpjzvdk Aefx Akyjh Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2007, HC Precast Concrete Slabs Factory Echo Brand Engineering Year 2007 Width: 1.2 m - 2.4 m 2-bucket system for feeding into hoppers Dosing machines Fgsdpfxjz H Ivus Akysh

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Engine oil and oil filter changed - All diesel filters changed - Diesel tank cleaned and recoated - Hydraulic oil changed - Air filter changed - Excavator lubricated - 2 new batteries - Operating hours approx. 10,300 hours - Tires approx. 70% - Excavator bucket width approx. 1.2 m - Excavator fully functional Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cabin): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel) Fgsdpfx Akszrzymeyoh Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled sum control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard deep bucket volume: approx. 0.60 – 1.00 m³ 51026ä

Year of construction: 2003, condition: good (used), Schatz Advanced Assembly System Schatz Assembly System Length: 5450 mm Height: 3000 mm Roll-off cradle Length: 5020 mm 2 x Demag cranes 1 x Liftket electric chain hoist Fsdpfsihiiiex Akyegh 1 x Schatz 907500 System without Advantech TPC-1260 TE touch panel PC More assembly systems in other sizes – new and used – can be found here.

Condition: used, Field of application: Internal logistics Fgsdpfx Akez I Afajyeh Please contact Theo Lelie , , ) for more information