Used Common Rail Injectors for sale (9,197)

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Crsdpfxez D H Dfj Aiiji Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. Csdpfsz D S Ezex Aiieri With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: used, Injector Inject Star Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Passage mechanism type: Gear rack rail Codpfekqyhnsx Aiisri Electric power: 3kW Machine dimension in cm: 50x160x200cm

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Voltage: 400 V Cedpfx Aiow Ra Rpsijri Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: ready for operation (used), Year of construction: 2020, Abus overhead crane, crane gantry, crane, suspended track, suspended crane, chain hoist, Berlin Cjdpfxs Ah Syko Aiieri Manufacturer: Abus Load capacity: 500 kg Year of manufacture: 1991, 2020, 2020 Double crossbeam Berlin 3: approx. 6.60 m (year of manufacture 1991), center track gauge Crossbeam Berlin 2: approx. 6.60 m (year of manufacture 2020), center track gauge Crossbeam Berlin 1: approx. 6.60 m (year of manufacture 2020), center track gauge Longitudinal rail: approx. 40.20 m Chain hoists: 3 units Manufacturer: Abus Load capacity: 500 kg Hook travel: 4 m You are welcome to visit us for an inspection. We will gladly arrange cost-effective transportation for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2019, Demag KBK overhead crane, crane system, crane, chain hoist Inspection report available! Manufacturer: Demag Load capacity: 1000 kg Year of manufacture: 2019 Length: approx. 24 m Width: approx. 5.90 m Track gauge: approx. 5.70 m Chain hoist: Manufacturer: Demag Type: DC-Com 10 1000 1/1 H4 Year of manufacture: 2019 Load capacity: 1000 kg Fine lifting speed: 1 m/min Main lifting speed: 4 m/min Hook travel: 4 m You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. Cedj Ah Rtxspfx Aiieri The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2021, Abus EHB overhead crane, crane structure, crane, suspended rail system, suspended crane, chain hoist 160 kg Freiburg Inspection report available! Manufacturer: Abus Load capacity: 160 kg Year of manufacture: 2021 Cross traverse: approx. 2.70 m Longitudinal rail: approx. 6.75 m Outreach/span: 2375 mm Track gauge: adjustable Chain hoist: Manufacturer: Abus Type: GM 2 160.6-1 Year of manufacture: 2021 Load capacity: 160 kg Fine lift: 1.50 m/min Main lift: 6 m/min Hook travel: 3 m You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. Crsdpfx Aj Ah R Nfsiiji The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, NOMA NOWICKI MHM-21/84 F is a brine injector designed for the uniform injection of fish and seafood, both boned and unboned, and – after a quick needle change – any other boned or unboned products, such as poultry. Manufactured in 2026, the machine features 21 needle sockets (84 quadruple needles), steel needles operating at a brine pressure of up to 3 bar, microprocessor control with a color touchscreen, and an AISI 316 stainless steel construction in food-contact areas. Replacement parts are included. Key Advantages of the NOMA NOWICKI MHM-21/84 F Brine Injector The machine ensures even distribution of brine in delicate products, such as fish fillets and seafood, and, after changing the needles, is suitable for injecting poultry and other products, whether bone-in or boneless. Smooth adjustment of pressure and head speed, 2-mm-diameter needles, and three-level pressure adjustment allow the injection process to be tailored to various raw materials and recipes. Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector Model: MHM-21/84 F Serial number: 01126803 Year of manufacture: 2026 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Installed power: 2.4 kW, maximum current 12 A Pump power: 1.5 kW Construction: AISI 316 stainless steel in food-contact areas, AISI 304 in other components; designed for use in the fishing industry Number of needle sockets: 21 Maximum number of needles: up to 84 (quad needles) for fish and seafood, or 42 for poultry Needle diameter: 2 mm Crjdpfxe Aggiqo Aiiei Head: easily replaceable, with quadruple needles as standard, top-side needle loading Head drive: top-mounted, NORD gearbox with frequency converter, stepless speed control Number of head strokes: 21 – 44 strokes/min Maximum head stroke height: 110 mm Maximum product height before injection: approx. 90 mm (up to 110 mm after injection) Removal clamp: adjustable to 3 heights, prevents over-injection Conveyor: easy-to-clean plastic belt, 325 mm wide Conveyor feed per head stroke: adjustable, 16; 35; 75 mm/cycle Brine pressure: continuously adjustable from 0.5 to 3.0 bar (in 0.1 bar increments), up to 3 bar as standard Brine pump: centrifugal, high-efficiency, stainless steel, controlled by a variable-frequency drive Filtration: multi-stage, easy to clean, with an additional tubular filter for improved brine purification Brine tank: stainless steel, 80 L, with brine mixing (preparation) and drainage Injection rate for a single pass (salmon): up to 12% Controls: microprocessor-based HMI, MITSUBISHI color touchscreen, MITSUBISHI PLC, variable-frequency drives on the gearbox and brine pump Throughput (approximate, for 1 pass): Herring fillets: injection rate approx. 10%, approx. 200 kg/h Salmon fillets: injection rate 8 – 12%, approx. 250 kg/h Poultry fillets: injection rate 25 – 30%, approx. 500 kg/h Chicken drumsticks: injection rate 20%, approx. 500 kg/h Chicken necks and wings: injection rate 12%, approx. 400 kg/h

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 7,150 mm, construction height: 2,920 mm, operating hours: 204 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 24 Mast: 3F7150 Cedpfx Aisz Tdzbeisri ID: 26112.5012 Category: Used Mast: 3F Lowered height: 2920 mm Lifting height: 7150 mm Capacity: 1000 kg Platform height: 6600 mm Picking height: 8200 mm Initialized: Yes Year: 2017 Hours: 204 hours Capacity: 24V / 1240Ah Options: FULL options!! - Triplex mast - FFL - Adjustable forks!! - Special SAFETY gates!! - Side guide / Rail guidance - (including end-of-travel braking under the battery) Truck width = 1480 mm Cabin width = 1400 mm Complete, LIKE NEW!!

Year of construction: 1974, condition: excellent (used), Cryogenic tank rail cars, gas, wagons, tank wagons, gauge, CO2, carbon dioxide, storage CO2 gas wagons, tank wagons, carbon dioxide, transportation, cryogenic tank rail cars, storage They are constructed to storage liquid CO2. manufacturer: Rheinstahl AG year of manufacture: 1974 volume: 51,79 m3 pressure: 20 bar test pressure: 30 bar Export from EU Crsdehfv Ehopfx Aiiji carbon dioxide, transportation, LCO2, gas. Please contact us for more details.

Condition: good (used), Injector for plastering machine, gypsum plastering machine -Injector: for cleaning machine -Connections: see photos Crsdps Ah Dwtjfx Aiiji -Dimensions: 1420/640/H930 mm -Weight: 57 kg

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Crjdjq Ii S Eepfx Aiisi

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Cjdez N Smdepfx Aiieri

Condition: used, Meat Master MM-26 / BI/52 Brining Machine For sale is a professional, mobile brining injector from the premium brand Inject Star, model MM-26. This machine from the Austrian quality manufacturer Pökelmaschinen Ges.m.b.H. Vienna (Inject Star) is a classic in butcher shops, for direct marketers, and in artisanal meat processing. It is ideally suited for the precise and uniform injection of brine into pieces of meat, with or without bones. The MM-26 series, due to its more compact dimensions, is perfect for small to medium-sized butcher shops, catering suppliers, or direct marketers (e.g., farm shops). The brining machine is made entirely of robust stainless steel and is in excellent, very clean condition for its age (see detailed images). The mechanical needle system with springs and the electromechanical control are extremely robust and, in contrast to modern touchscreen controls, are hardly susceptible to costly electronic damage. Crsdpfez Dtg Hex Aiisi Technical data: Manufacturer: Inject Star (Pökelmaschinen Ges.m.b.H. Vienna) Trade name: MM-26 / Meat Master 26 Type / Model: MM-26 / BI/52 Connection value (rated power): 2.5 kW Operating voltage: 3x 400V / 50 Hz (three-phase power) Year of manufacture: 1999 Equipment: Spring-loaded needles (automatic bone protection / needle deflection system), sturdy stainless steel articulated belt, integrated pressure regulation with manometer, mobile base with rollers, suction hose with filter basket. Safety: CE marking present, transparent splash guard at the workstation. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Cedpjw Hnvtofx Aiijri Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: used, mileage: 8,000 km, first registration: 10/1987, fuel type: diesel, overall weight: 6,500 kg, color: orange, gearing type: semi-automatic, number of seats: 1, Year of construction: 1987, Equipment: all wheel drive, trailer coupling, MB trac 700 K, dual-purpose (road and rail) Excellent condition Company-owned vehicle Torque converter Wagon braking system, 300 tons Crsdpfx Aiei R Ahbsiji UVV inspection valid until 07/2012 Approximately 1780 operating hours.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, suspension: air, color: white, = Additional Options and Accessories = - Rear doors - Refrigeration/freezer unit - Air suspension = Notes = Schmitz Cargobull SCB*S3B - Frigo Schmitz - Hooks/rail system/meat hanging - ATP/FRC - Pallet box Year of manufacture: 11-6-2020 WSM000005243735 Hooks/rail system/meat hanging Pallet box Hours: diesel 20,429 / Electric: 777 Box: 13.40 - 250 - 264 = Further Information = General Information Year of construction: 2020 Axle Configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 9,762 kg Payload: 32,238 kg GVW: 42,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Schmitz Cooling engine: Diesel and electric Csdpfx Aiez Dfu Nsieri Condition Technical condition: good Optical condition: good

Condition: used, Year of construction: 1996, total length: 200 mm, total width: 70 mm, total height: 187 mm, overall weight: 670 kg, input voltage: 380 V, input frequency: 50 Hz, Available for sale: LUTETIA injection molding machine, Type: IMPB Csdpfjz Tfdwox Aiiori Year of manufacture: 1996 Weight: 670 kg 380V; 50Hz; power: 6.5 kW Overall dimensions: 200 x 70 x 186 cm 4,700 EUR net price Price negotiable.

Condition: used, mileage: 5,800 km, first registration: 10/1983, overall weight: 6,000 kg, color: green, gearing type: mechanical, number of seats: 1, Year of construction: 1983, Equipment: all wheel drive, trailer coupling, MB Trac 700 K Road and Rail Dual-purpose vehicle Rail guidance Credpfx Aiei R Ag Tsiji Coupling rod UVV 07.2012 approx. 1500 operating hours currently in daily use.

Condition: used, Year of construction: 2011, 2011 Fomaco FGM 48F brine injector for poultry and fish – used Fomaco needle injector with 48 needles for chicken, poultry and fish. The Fomaco FGM 48F is a brine injector from the Danish specialist Fomaco (Food Machinery Company). With 48 needles it injects brine or marinade evenly into chicken, poultry and fish: more flavour, a more tender product and a consistent weight per piece. The product passes under the needle head on a plastic modular belt; injection pressure and belt speed are set to suit your product. Built in 2011, stainless steel construction, 3 x 400 V / 11 kW and 6 bar compressed air. The machine is in Emmeloord and can be viewed and tested with your product. Key features - 48 needles for an even distribution of brine or marinade - Suitable for chicken, poultry and fish, including delicate products - Plastic modular conveyor belt, quick to remove for cleaning - Stainless steel construction, built for the wet environment of a meat or fish processor - Injection pressure and belt speed adjustable per product - Built in 2011, 3 x 400 V / 11 kW, 6 bar compressed air Crodpoz Hqy Nefx Aiisi Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing needles and wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Brine injector (needle injector) Condition: Used Number of needles: 48 Application: Chicken, poultry and fish Conveyor: Plastic modular belt Construction: Stainless steel Connection: 3 x 400 V, 50 Hz; 11 kW; max. fuse 35 A Compressed air: 6 bar

Year of construction: 2014, condition: ready for operation (used), number of axes: 7, This 7-axis Yaskawa Motoman ES165D + rail was manufactured in 2014. It is designed for advanced automation tasks, providing flexibility and precision in various applications. If you are looking to get high-quality automation capabilities, consider the Yaskawa Motoman ES165D + rail machine we have for sale. Contact us for further details. • 7th-axis linear rail/track (external axis) Codoy T Iiyopfx Aiieri

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane, overhead crane, bridge crane, industrial crane Hoisting mechanism with 0.3 full load hours = only 7 operating hours on the meter!!!!! Load capacity / lifting capacity 3.2t - 3,200KG Gauge 13600mm, overall dimension approx. 13800mm Year of manufacture 2000 Lifting height 6m Overall height from top of crane to hook approx. 1050mm Head beam length with buffer approx. 2450mm With floor control Crane is disassembled and immediately available Very good condition, see pictures Crjdpezv Du Iofx Aiioi Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Cjdpfx Aiszut Syoieri Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Battery: 24 V / 775 Ah - Hoppecke Options: Fully equipped - Mast: Triplex FFL - Equipped with side guides & sensors (INCLUDING side rollers/wheels & sensors!!)

Condition: good (used), functionality: limited functionality, fuel type: diesel, ID43343 MACHINE TYPE: Road-rail excavator BRAND: Atlas MODEL: 1104 ENGINE: Diesel, Deutz BUCKET: Yes Csdpexw Hg Aofx Aiisri CONDITION: Normal

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Capacity: 1,000 kg Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Credpjzq Udvefx Aiisi Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance