Used Diesel Aggregate for sale (9,038)

Condition: ready for operation (used), Year of construction: 2024, A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible. Fjdjuh Ayxopfx Akyegh

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: Fgedpfx Aoyfflzokyeh As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394C01558, Year of construction: 2012, operating hours: 11,960 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,421 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,000 mm Overall height: 3,421 mm Load capacity: 5,000 kg MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 8,830 kg Operating hours: 11,960 h EQUIPMENT Half-cab Fjdpfx Aksz I Rqwjyegh Side shifter 3rd valve 4th valve Heater External reference: SL14107SP

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394C04103, Year of construction: 2012, operating hours: 19,070 h, load capacity: 5,000 kg, lifting height: 4,100 mm, fuel type: diesel, mast type: simplex, construction height: 3,070 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,100 mm Overall height: 3,070 mm Load capacity: 5,000 kg MACHINE DETAILS Fedsz I I Ruopfx Akyjgh Mast type: Simplex Fuel type: Diesel Unladen weight: 7,600 kg Operating hours: 19,070 h External reference: SL15892SP

Condition: excellent (used), Year of construction: 1998, PROD. ATLASCOPCO TYPE XAMS445 S/N YA3-047166-00291071 YEAR 1998 POWER (kW) 206 CAPACITY (m3/min) 26.1 Fgodeztxxcspfx Akyjh PRESSURE (bar) 8.6 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. Fjdpfx Akeq Nxrxeysgh 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X393H00421, Year of construction: 2017, operating hours: 14,426 h, load capacity: 3,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,714 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,950 mm Overall height: 2,714 mm Load capacity: 3,500 kg MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Unladen weight: 4,430 kg Operating hours: 14,426 h EQUIPMENT 3rd valve 4th valve Fodpfx Ajz I Rf Ijkysgh External reference: SL14851SP

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT Fgjdpfx Akez Iwi Hoyoh 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling Fjdpfx Akeyi H Eqsyogh built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X394F03221, Year of construction: 2015, operating hours: 7,585 h, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,971 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Fsdpfx Aksz I Intsysgh Load capacity: 5,000 kg MACHINE DETAILS Mast type: Standard Vehicle type: Diesel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Overall height: 2,971 mm Operating hours: 7,585 h EQUIPMENT 3rd valve 4th valve Heater Full cab Twin tires External reference: SL16576SP

Condition: used, machine/vehicle number: H2X393G05053, Year of construction: 2016, operating hours: 15,338 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,650 mm Fork carriage adjustment: 550–1,940 mm Fjdsz Iwr Iepfx Akyogh Fork length: 1,800 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Diesel Next service: in 461 hours UVV (German accident prevention regulations) valid until: 06/2027 Dimensions (L x W x H): 4,700 x 1,250 x 2,190 mm Operating hours: 15,338 h EQUIPMENT Former Linde full-service unit 3rd and 4th valve Full cabin Heater Windshield wiper LED work light, front LED work light, rear Comfort seat Fork carriage with side shifter All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 173

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Drive type: Diesel Number of wheels: 6 Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Own weight: 17,510 kg Protective roof height: 3,000 mm UVV certification valid until: 08/2027 Starter batteries renewed: 01/2025 Operating hours: 3,410 h EQUIPMENT Former Linde full-service unit 3rd and 4th hydraulic valve Hydraulic fork adjuster Side shifter Full cab Air conditioning Heater Windshield wiper Multi-function display with touch function LED work light, front LED work light, rear Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light, rear Motec camera with view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1 Fedpfx Ajz Iwimjkysgh

Condition: used, machine/vehicle number: H2X392V00600, Year of construction: 2018, operating hours: 8,030 h, load capacity: 2,500 kg, lifting height: 4,600 mm, mast type: triplex, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,600 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Fjdpez Iwm Eefx Akysgh Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,200 x 2,200 mm Weight: 3,950 kg UVV certificate valid until: 05/2027 Next service due in: 470 hours Operating hours: 8,030 h EQUIPMENT Full free lift 3rd hydraulic valve Side shifter Full cabin without driver's door Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat Lumbar support Seat heating Display of the tilt angle Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 105

Condition: good (used), functionality: fully functional, machine/vehicle number: FD30T3C, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: gasoline, gearing type: automatic, tire condition: 85 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 4,380 kg, color: grey, Equipment: CE marking, head guard, lighting, sideshift, Equipped with hydraulic side shift Fedpoywuw Eofx Akyjgh Export possible, immediately available

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 9,794 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: simplex, construction height: 3,580 mm, fork carriage width: 1,800 mm, empty load weight: 13,540 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,250 mm, Diesel forklift Load center: 900 ISO class: FEM 4 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 4 x 8.25-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 300-15 Fedpfxez N Raie Akyjgh Rear tire condition: 80 - 100% Battery year of manufacture: 2000 Dual auxiliary hydraulics, full cab with heater, diesel particulate filter (DPF), single-lever control, single-pedal operation, 2x front work lights, 1x rear work light.

Condition: excellent (used), Professional plate compactor from the renowned brand AMMANN. Model AVP 2920 is equipped with a reliable HATZ Diesel engine with 5 kW of power. This machine is intended for professional paving, roadworks, and compaction of soil, paving stones, bedding, and asphalt. Fedpfjy Sifyex Akyogh The unit is fully mechanical with a robust German construction. Visual condition as per the photos – normal signs of use. Technical data: • Manufacturer: AMMANN • Model: AVP 2920 • Year of manufacture: 1999 • Engine: HATZ Diesel • Engine type: 1B30-6 • Power: 5 kW • Operating weight: 190 kg • Manual start • Made in Germany Applications: • Compaction of paving stones • Paving works • Road construction • Soil and bedding compaction • Excavations and foundations Condition: Used machine, complete. HATZ engine – a durable and highly regarded diesel unit

Condition: good (used), operating hours: 129 h, functionality: fully functional, fuel type: diesel, output current: 304 A, output voltage: 380 V, output frequency: 50 Hz, Emergency power system M94, Engine GEC Diesels Ltd, Doman Diesels, Stafford, England, Engine Type 6LET2 Fjdpfx Aou Rb Trskyegh Generator Newton Derby LTD. Derby England, Documentation and spare parts available.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Fgedjxlngajpfx Akysh Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Weight (kg) approx.: 2440 Quantity in stock: 1 Manufactured in: Finland / Netherlands Fgsdpfexzplijx Akysh Comments: >x emergency generator set, without electric panel

Condition: used, functionality: fully functional, Year of construction: 1989, operating hours: 3,209 h, load capacity: 1,500 kg, lifting height: 4,800 mm, free lift: 1,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,080 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, empty load weight: 2,640 kg, drive type: Diesel, construction width: 1,040 mm, Diesel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Fodpfxjz Iungj Akyjgh Mast type: Triplex Transmission: Dual pedal Speed class: 15 Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will be happy to provide you with a quote for leasing & financing, as well as delivery at favorable conditions. A trade-in of Linde equipment is also possible – even if you do not purchase a device from us. The stated operating hours were recorded as of the date of posting. Subject to prior sale, changes and errors. Without attachments, without additional hydraulics Work light in front, half cabin.

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 2,106 h, load capacity: 1,600 kg, lifting height: 3,820 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,520 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, empty load weight: 2,800 kg, total length: 2,250 mm, drive type: Diesel, construction width: 1,120 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Standard Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 21x8-9 Fjdpez N Racjfx Akyegh Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 40 - 60% Battery year of manufacture: 1998 Additional single hydraulic circuit, side shifter, full cabin with heating, 2 work lights at the front

Condition: used, Year of construction: 2021, operating hours: 7,593 h, load capacity: 4,500 kg, lifting height: 3,180 mm, mast type: duplex, fork length: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Lifting height: 3,180 mm Fork length: 2,200 mm MACHINE DETAILS Mast type: Duplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,600 x 1,500 x 2,400 mm Dead weight: 6,413 kg UVV valid until: 04/2027 Next service due in: 564 hours Operating hours: 7,593 h EQUIPMENT 3rd + 4th valve Free-lift mast without central hydraulic cylinder Formerly a Still full-service unit Hydraulic fork positioner Side shifter Full cab Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) StVZO lighting with turn signals for road approval Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Fgodpfjz Iwi Tsx Akyjh Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 32

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 7,765 h, load capacity: 3,000 kg, lifting height: 4,950 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 37 kW (50.31 HP), empty load weight: 4,980 kg, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 60 - 80% Fsdpfxjz Nck Sj Akyjgh Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Diesel forklift YALE GDP 30TF - - 3 ton lifting capacity - - Side shifter - - - Triplex free-lift mast - - Overall height 2.17m - - Lifting height 4.95m - - Year of manufacture 2002 - - - 7765 operating hours according to the meter - - - 4-cylinder Yale diesel engine, 50 hp - - Full cabin - - - 4th control circuit - - - purely mechanical, very simple forklift, very maneuverable - - - Solid rubber tires, approx. 70% front and 50% rear - - - Long forks, 1.40m - - - Good forklift, in condition appropriate for its age! Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin

Condition: excellent (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: light blue, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 3 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 2 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Fedpjx R Szuefx Akyjgh Joshua Alexander Iron Flag Global Limited

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, fork carriage width: 2,900 mm, fork length: 2,400 mm, empty load weight: 39,000 kg, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift – Diesel Load center: 1200 Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Transmission: Clark HR32 – overhauled in 2021 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 80 – 100% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 60 – 80% Fsdoz H Dvwspfx Akysgh New: forks, lifting chains, front tires