Used Combine Harvester for sale (4,171)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW Guodsz Hngmopfx Angoh • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Guedpfsz Ecfhsx Angeh Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Grinding table 2500 x 930 Includes existing grinding belts.

Condition: good (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), Equipment: CE marking, For sale is a robust and precise jointer and thicknesser from the German quality manufacturer Panhans. The machine is equipped with a Centrofix cutterblock. This quick-change system – similar to the Tersa cutterblock – allows for easy cutter replacement without time-consuming adjustment of the cutter knives. Technical data and features: +Manufacturer: Panhans +Type: AD 440/445-B +Year of manufacture: 1999 +Planing width: 630 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Total length of the jointer tables: approx. 2,300 mm +Centrofix cutterblock +Cutterblock speed: approx. 5,000 rpm +Digital display for planing thickness +Electromotive adjustment of the thickness table with the push of a button +Two rollers in the thickness table +Automatic workpiece feed +Two feed speeds +Massive, finely planed cast iron tables +Folding jointer tables +Swiveling fence up to 45° +Dust extraction connection +Motor brake +CE version The robust Panhans construction ensures smooth operation and clean planing results. The digital display, the electric thickness table adjustment, and the Centrofix cutterblock allow the machine to be operated comfortably, quickly, and precisely. Ideally suited for professional use in carpentry shops, joineries, and woodworking shops. The machine can be demonstrated under power by prior arrangement. Shipping via freight forwarder is possible. You will receive an invoice with VAT shown. Gedpfx Anezz Nk Esgeuh Price: €13,685 including VAT - €11,500 net Subject to prior sale and errors in the technical data.

Condition: good (used), Code: 0486 Brand: SCM MINIMAX Model: CU 410 CLASSIC - CE Standard Universal professional high quality 6-works combined machine for joinery, production of furniture, custom furniture, panels, doors, window frames and various - CE Standard Technical data: Sturdy construction: the base consists of a single, fully welded steel monoblock Surface Planer: Max working width mm 410 Length of cast iron worktables mm 1800 Tiltable surface fence 90-45° Planer spindle rotation speed rpm 5200 Max removal at planer mm 4 Thickness planer: Thickness table size mm 605 x 410 Feed speed at thickness mt/min 7 Min/max working height on thicknesser mm 3/230 Circular saw: Squaring carriage length mm 2250 Squaring frame Blade inclination 90-45 degrees Max diameter of saw blade with installed scoring unit mm 315 Max saw blade projection mm 100 Scoring unit blade unit diameter mm 80 Cutting width at parallel fence mm 1050 Telescopic guide with 2 squaring stops Spindle moulder: Spindle diameter mm 30 Max spindle length mm 100 Spindle rotation speed rpm 1400/3500/6000/8000 Max tool diameter mm 210 Gujdpfsz E Sgusx Angeh Mortiser: Cast iron mortiser with spindle diameter 16 mm Work surface dimensions 470 x 220 mm Workpiece clamping press N° 3 Three-phase motors Hp 5,5 Suction connections N° 3 ports diameter mm 120 Overall dimensions of assembled machine mm 2500 x 2800 x 1200 h Overall dimensions for transport mm 2500 x 1600 x 1200 h Weight kg 630

Condition: used, Year of construction: 2000, functionality: fully functional, cutting height (max.): 96 mm, saw blade diameter: 300 mm, planing width: 300 mm, input voltage: 400 V, power: 3 kW (4.08 HP), input frequency: 50 Hz, sliding table length: 2,250 mm, The used SAMCO CU 300K is a versatile combination woodworking machine designed for professional applications. It integrates multiple machining functions in a single unit and is ideal for workshops with limited space. Despite its year of manufacture, it offers robust construction and reliable performance for daily operations. Machine equipment Circular saw unit Surface planer Thickness planer Gusdpfoyyltisx Angoh Milling unit Further technical data Maximum thickness planing height: 230 mm

Condition: used, Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Gujdpfxjztvyds Angjh Technical data: - Motor: 3 kW

Condition: excellent (used), Combination unit: Smoking (hot smoking, cold smoking), heating, cooking, baking, drying. Automatic operation Core temperature measurement and control Cart included Guodpfx Aoz N Irvsngsh Fully functional Test run possible at any time

Condition: good (used), functionality: fully functional, Year of construction: 1998, Wrapper for round bales (125 cm) or square bales (80x90), with electric control. Guodoztnkhopfx Angeh

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm Godpfx Anoz Ef Ifjgjuh 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, Gedjy Ti Tmepfx Angouh side carriage, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Robust multi-function machine. Weight: 760 kg.

Condition: excellent (used), Year of construction: 2019, Combined jointer and thicknesser SCM minimax fs 41e Year of manufacture: 2019 Power of drive motor: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Planer cutterhead type: TERSA – 4 cutterheads Speed: 5200 rpm Planing width, max.: 410 mm Feed rate: 6 / 12 m/min Dust extraction port: 2, diameter for thicknessing: 120 mm Jointer Infeed table, length: 1034 mm Chip removal, max.: 5 mm Dimensions and weights, length: approx. 2000 mm Gsdpszi Nhmjfx Angsuh Width/depth: approx. 1110 mm Height: approx. 1115 mm Weight: approx. 430 kg TERSA cutterhead system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and uniform material feed. Material feed with two speeds. Numerical display for thickness table height. The 2,000 mm long jointer tables facilitate easy jointing of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them resistant and permanently flat. Sturdy, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height. The high machine weight ensures the highest precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction.

Condition: good (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, fuel type: diesel, color: white, Equipment: additional headlights, air conditioning, cabin, lighting, For sale is a used Syncrofalke 3t cable crane ("mountain harvester"), manufactured by Mayr Melnhof Forsttechnik GmbH for forestry operations. Year of manufacture: 2017 Equipped with a Woody 60 processor head (including a flail saw). Carriage: Sherpa U Guedswtw Apopfx Angoh Carrier vehicle: MAN TGS Can be inspected at any time during operation. Special features: Ideal for steep slopes and difficult terrain! Very robust design for full-scale forestry operations. Regular maintenance – ready for immediate use! Condition: Technically and visually well-maintained. Ready for use without any outstanding maintenance requirements.

Condition: excellent (used), Multi-function machine, panel saw, thickness planer SCM Casadei Model: C 30 C Thickness planer 3 kW: Width: 30 cm, Max height approx. 200 mm, 3 knives, 1 feed speed, Gjdpfx Anoy Eyhrsgjuh Jointer: Width: 30 cm, Table length: 150 cm, 3 knives, Adjustable angle fence, Spindle moulder 3 kW: Spindle diameter 40 mm, Spindle height adjustment up-down, 4 speeds, Side sliding table, Adjustable fence, Panel saw 3 kW: Scoring unit, Height and 0-45 degree angle adjustment, Sliding table 225 cm, Ruler on side table, Max saw blade 315 mm, Horizontal drilling machine: Table adjustable up-down, front-back, left-right, The machine has 3 motors, Power supply 380V, Used machine in good condition, ready for operation, Robust and multi-functional.

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Gjdpfx Anszz Nt Hsgjuh Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net

Condition: excellent (used), Toolmax K310 multi-functional machine: saw, planer, router – 5-in-1 Planer: Guodpfx Asy Udvxsngjh width 31 cm, max height 195 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length 155 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 150 cm sliding table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, 150 cm sliding table, guide rail on the side table, max blade diameter 250 mm Horizontal drilling machine: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each 3 kW + a motor for the planer feed, power supply 380 V, used machine in very good condition, ready to work.

Condition: used, Year of construction: 1991, used Gsdpfx Aoz Alb Aengjuh Manufacturer: Casadei Type: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Surfacing tables: can be tilted – complete Table lips: slotted Table lips: low-noise Motorized automatic brake Number of knives: 4 Safety knife shaft Table guide rollers: 1 x Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Dust extraction connection: D 140 mm Space requirement: approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust, combined jointer and thicknesser from Panhans, type 445. The machine has a planing width of 510 mm, a powerful 5.5 kW motor, and a motor brake. The complete cutterhead guard, including the support arm, has been replaced. Thanks to the segmented infeed roller, the machine is also well suited for simultaneously processing workpieces of different thicknesses or workpieces that are offset. Two rollers in the thickness table facilitate the feed, especially for heavy and long workpieces. Technical data and features: Gedpjzz Niuefx Angeuh +Manufacturer: Panhans +Type: 445 +Combined jointer and thicknesser +Planing width: approx. 510 mm +Maximum thickness planing height: approx. 220 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Cutterhead speed: approx. 5,000 rpm +Jointer table length: approx. 2,050 mm +Two feed speeds: approx. 7 and 14 m/min +Jointer fence can be swiveled up to 45° +Motor brake +Segmented steel infeed roller +Two rollers in the thickness table +New cutterhead guard, including a new support arm +Dust extraction connection: approx. 160 mm +Solid and durable industrial machine +Weight: approx. 1,000 kg A solid and heavy Panhans machine with a large 510 mm planing width – ideal for carpentry shops, joineries, and professional use. Inspection and a test run are possible by prior appointment.

Condition: excellent (used), functionality: fully functional, Combination planer/jointer, manufactured by Kölle, 630mm planing width, rubber infeed roller and rubber outfeed roller, motor brake, cutterhead with 2 strip-type planing knives, electric table height adjustment. Given its age, the machine is in very good condition and is ready for immediate use. Gedpfx Aozzfp Djngsuh

Condition: ready for operation (used), functionality: fully functional, PANEL SAW Carriage length: 1600 mm Cutting height: 75 mm Scoring unit Tilting saw unit up to 45° Manual raising and lowering of the saw blade SPINDLE MOULDER Gusdpfxszz N Nns Angeh Spindle diameter: 30 mm Spindle height: 90 mm Manual spindle raise and lower Speeds: 3500/6000/8000 rpm SURFACE & THICKNESS PLANER Working width: 300 mm Maximum thicknesser height: 200 mm 3-knife cutterhead Conventional knives HORIZONTAL DRILLING MACHINE 550 kg 220 V Year: 2016

Condition: like new (used), For sale is a used Hammer C3-31 combination machine with a cutting length of up to 865 mm. The machine was only used briefly for demonstration purposes in our workshop. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Jointer/planer width 310 mm - 3 cutterblocks (reversible cutter system) - Planing height 4-225 mm - Tilting circular saw 90-45° - Sliding table 1250 mm - Miter gauge - 3 motors, each with 4 hp The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, circular saw Reference: R-D1618-37 Gedpfjzxdrlox Angouh

Condition: excellent (used), SCM nova fs410 thicknesser planer Planing width: 410mm, 4 knives, 2 feed speeds, Thicknesser table mounted on 4 screws, Manual adjustment of the thicknesser table, Max. planing thickness: 240mm, Length of the planer tables: 220cm, Electric brake, Adjustable planer fence, 7KW motor, Gedpfsz Epcgsx Angsuh Machine inspected, very good condition, Weight: approximately 550kg.

Condition: excellent (used), functionality: fully functional, SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Guodpfez D Ad Iox Angsh Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: like new (used), Year of construction: 2021, For sale is a Hammer A3-41 jointer-planer, a demonstration model with a planing length of 1800 mm. The machine has been inspected by our qualified personnel and is in like-new condition. Technical data: - 3-system cutterhead Gusdpoz Atb Djfx Angsh - Planing width 410 mm - Planing length 1800 mm - Max. feed height 225 mm - Dust extraction port Ø 120 mm - Motor power 4 kW - Year of manufacture 2021 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thicknesser, jointing, planing Reference: R-A0117

Condition: used, For sale is a used Hammer A3-31 surface planer and thicknesser with a planing length of 1380 mm. The machine is in good condition and has been inspected and refurbished by our service team. Technical data: - 3-knife cutterhead - Planing width 310 mm - Planing length 1380 mm - Max. workpiece height 230 mm - Dust extraction port Ø 120 mm - Motor power 3 kW / 4.1 HP Gsdpfjz Eucfsx Angouh - Year of manufacture 2010 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Reference: R-S255D

Condition: good (used), Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Max working height 220 mm Min working height 7 mm Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Gusdezcfwxepfx Angoh Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Weight kg 340