Used Cold Water Unit for sale (36,497)

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Dlodpjg D H Rujfx Ab Tsa Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler cooling capacity: 6 kW Djdpfew D T T Esx Ab Tjla weight: 110 Kg.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 73965, Technical specifications: • Manufacturer: Rösler Oberflächentechnik GmbH (Germany) • Model: Centrifuge Z 1000 • Year of manufacture: 2016 • Motor power: 11.0 kW • Power supply: 400 V / 50 Hz • Maximum speed: 2,650 rpm • Maximum load: 65 kg • Maximum throughput: 1,000 l/h Dledpfjw Rc Anex Ab Tea • Maximum liquid temperature: 40 °C • Maximum charge material temperature: 50 °C • Drum inner diameter: 500 mm • Machine weight: 1,200 kg • Serial number: 73965 New cutting blades, seals, and centrifuge bearings. Fresh water tank 1x 2,000L and waste water tank 1x 2,000L and sludge trolley. Automatic process water refill.

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Dlodpfx Abewz Ekqe Tea Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Condition: excellent (used), functionality: fully functional, Chiller - Emerson Network Power chilled water unit Brand Emerson Network Power Dsdpfx Abowplwgs Tsla Cooling capacity 1300 kW Dimensions 13.5×2.50×2.40 m The device is characterized by high cooling capacity, which allows it to be used in demanding environments where reliable heat dissipation is necessary.

Condition: as good as new (ex-display), Year of construction: 2023, newly arrived air cooled chiller, 3,6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suitable for smaller chilled water supply of process applications. Compact design, simple control. Dodpfx Abefy Rycj Tjla

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition Dedpsvw A T Nsfx Ab Tela

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake Dodpfjg Ey T Eox Ab Tjla -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: good (used), Year of construction: 2004, EMA high frequency welding unit with cold water chiller EMA High Frequency Welding Unit MFA with Thermotec PT2000 water cooling system Welding unit range 0 - 1000 ° C MF output: 80A Frequency MF-Gen.: 10 KHz Mains connection: 380V 106 A foot pedal Water cooling, cold water chiller Thermotec PT2000 Dimensions approx. L1500x W730x H1900mm Volume 1730 Ltr. Year: 2004 The drip pan is not included in the scope of delivery. More articles - new and used - can be found in our shop! Djdpfod Tv H Djx Ab Tola International shipping costs on request!

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Dlsdpfx Aspu R Nceb Toa Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data Dljdpjxvca Asfx Ab Tja 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, axle configuration: 6x4, tire size: 315/80R22.5, fuel: diesel, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, loading space volume: 20 m³, Year of construction: 2023, Equipment: air conditioning, = More options and accessories = - Leaf suspension = Remarks = Model year: 2023 = Company information = Van Vliet Automotive Trading - Your Truck Partner A wide range of new trucks, trailers, 4x4s and machines. Ready to use immediately! Our own (design) workshops, modification center and paint shop guarantee you a fast and project-appropriate processing of your order, anywhere in the world. ISO and AEO certified. Logistical processing and customs/export facilities. Worldwide spare parts service. International mechanic and training team operating on site worldwide to provide technical support and training. Contact our experienced, multilingual team of account managers now for professional, project-specific and competitive advice. = More information = Gearbox: TipMatic 12.28OD, automatic Year of manufacture: 2023 Model year: 2023 Usable material: Food Tire size: 315/80R22.5 Suspension: Leaf spring suspension Number of cylinders: 6 Engine displacement: 10,518 cc GVW: 33,000 kg Dedpfxevpqipj Ab Tsla = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings. WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings.

Condition: new, functionality: fully functional, Staying cool, even when temperatures rise! With rising summer temperatures, reliable cooling in production facilities is becoming increasingly crucial. At ONI, we offer high-performance rental cooling systems, ideally suited for use in production environments. Whether as a replacement if your existing cooling system fails, to support insufficient cooling performance, or for general climate control—we have the right solution for your operations. Our portfolio includes: • Chillers from 10 to 10,000 kW cooling capacity • Various designs, including pump-tank units with regulation and control systems • Containerized cooling systems with all necessary fittings and control devices • Cooling towers, dry coolers, and pump-tank systems with complete regulation and control Dedpoxbzafofx Ab Tsla The benefits for your production: • Avoid production downtime with reliable machine cooling • Maximum efficiency with minimal energy consumption • No capital expenditure, as rental is flexible and tailored to your needs • Instantly operational for maintenance downtime, system malfunctions, or seasonal peaks • Flexible connection options for almost any infrastructure • 24/7 hotline and service—even for third-party equipment Plan ahead—avoid unplanned outages We develop comprehensive cooling concepts before acute needs arise, so you are fully prepared for future challenges. Contact us for a no-obligation consultation—we’ll show you how to safeguard your process cooling while minimizing costs and risks.

Year of construction: 2018, condition: as good as new (ex-display), Frigel Water Temperature Control Units, like new, 400 V, 32 A, up to 90 degree Dljdpfx Aoi Tx Dnob Tsa

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, Dljdpfx Ajiyyf Ijb Toa partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SANDERS (€2000) Dodpsxga Tzofx Ab Tjla With this machine, you can also use loose 3mm pellets! And, of course, blocks. As good as new, 1-year warranty. Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning tasks, ranging from small to very large projects. The advantage of this machine is its absence of new-generation electronics. It is one of the most aggressive machines on the market. This unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Complete blasting setup with the following equipment: COLD JET i3 Microclean (12 HOURS OF OPERATION) 1 x 20' blasting hose 1 x Cold Jet applicator 1 x nozzle Price: €24,500 One of the best machines in the world. No electronic systems; therefore, highly reliable and inexpensive to maintain. For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repair and maintenance services available for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Droogijsstraalmachine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines i3 Microclean Dry ice press

Condition: used, Used Extraction unit comprising : Ø 1 DE DIETRICH stainless steel reactor • Capacity : 310 litre • Electric heating: 6 x 2 kW • Frame agitation Ø 1 stainless steel heat exchanger • Surface area : 2 m² Dlodpfx Absxyxn Do Tea • 29 tubes - Ø 20 x 150 mm Ø 1 stainless steel vessel 600 litre • Ø 900 x 1300 mm Ø 1 liquid ring vacuum pump • Type LOHE 25309 • Motor : 2.2 kw - Hp 3– Rpm 3000 – 3x 220/380 volts Specifications: Capacity: 82 gal Diameter: 35.4" Straight Side: 51.18" Material of construction: stainless steel Type of stainless: DE DIETRICH stainless steel

Condition: used, Year of construction: 2004, functionality: fully functional, NP 684 | COMPLETE BOTTLING LINE PET KRONES 30,000 BPH Product: Still water (with neck modification can also process sparkling) Capacity: - 30,000 BPH with 0.5L bottles - 30,000 BPH with 1.5L bottles - 22,000 BPH with 2L bottles Total working hours: 56,000 Preform Tipper M. Tanner AG: - Model: VZT-4010 - Year: 2004 Preform Washing System Krones: - Year: 2004 High Pressure Compressor Ateliers Francois: - Model: 20G282 - Year: 2004 - Pressure: 40 BAR PET Blower Krones: - Model: Contiform 20 - Year: 2004 - Number of cavities: 20 - Molds not included - Complete with preform feeder and orientator Cap Elevator and Orientator Gassner: - Year: 2004 - Supported cap types: Plastic pre-threaded cap - Type: Mechanical Cap Elevator and Orientator Gassner (Sport Cap): - Year: 2004 - Supported cap types: Sport cap - Type: Mechanical CIP Steinecker: - Model: Media - Year: 2004 UV Sterilization Station WEDEDCO: - Year: 2004 - Water treatment by UV rays KRONES Monoblock (filler and capper): - Model: Isofill - Year: 2004 - Rotation: Counterclockwise - Electric height adjustment Filler: - 88 valves - Filling type: Isobaric - Valve type: Mechanical - With degassing Capper: - 22 heads - Supported caps: Pre-threaded plastic; Sport Cap - Distribution: Pick & Place system Dodpfx Abjxl R Uao Tsla Bottle Inspector Heuft: - Model: HBBVXTXXX - Year: 2015 - Bottle flow: Right to left - Inspection: Overfill, underfill, cap presence, cap misalignment Bottle Conveyors Krones: - Year: 2004 Labeller Krones: - Model: Contiroll - Year: 2019 - Rotation: Clockwise - Electric head adjustment - 18 mechanical cam heads - 1 roll-fed station - wrap-around label - Label presence control Shrink Wrapper Variopac: - Year: 2004 - Execution: Film only Wrap Around Packer Krones: - Model: Wrapapac - Year: 2004 - Hot glue system: Nordson - Packaging formats: 12x1.5L, 24x0.5L - Hours used: 1000 Bundle/Box Conveyors Krones: - Year: 2004 Handler Comag: - Model: H 55/2 - Year: 2004 - Double lane Palletizer Krones: - Model: Pressant - Year: 2004 - Package types: Bundles, boxes - Type: Push - Pallet warehouse - Interlayer system - Dual infeed Pallet Wrapper Robopac: - Model: HELIX HS 30 - Year: 2004 - Wrapping type: Rotating arm - Pre-stretch system

Condition: ready for operation (used), functionality: fully functional, type of cooling: air, Industrial Cooling Fan Unit EIV-7B with 11 kW Motor + Heat Exchanger Complete industrial cooling/ventilation assembly previously used for insulator cooling. The set includes a centrifugal fan EIV-7B, a 11 kW three-phase motor, a mounting frame, and a heat-exchange module. Removed from a working installation during system modernization. Dsdpfoxznylsx Ab Tela Technical Specifications Model: EIV-7B Airflow: approx. 7000 m³/h Speed: 2880 rpm Motor Power: 11 kW, 3-phase, 400 V Fan Type: centrifugal / radial Mounted on a steel base frame Equipped with a heat-exchanger block (can be sold together or separately) Suitable for industrial cooling, ventilation, energy systems, filtration, HVAC, etc. Condition Mechanically in good working order Previously operated via a frequency inverter Removed from a functioning installation

Condition: used, In this offer you purchase a used accessory ‘Canon Document Insertion Unit N1’ Object of sale: 1 x Canon Document Insertion Unit N1 for various Canon models Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Dsdpfx Abjt Rfh Es Tjla For further information you can of course also contact us personally.

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency Dledpfx Aovg U Dxob Tea -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Advantages: Further information regarding the bagging machine: System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Maintenance costs: The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year. Dodpfx Aow Ttxfsb Tjla

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, New filling machine / filler suitable for filling liquids, pastes, creams, oils, etc. Typical applications include: - Disinfectants - Shampoos - Creams - Honey - Jam - Milk - Yogurt - Water - Alcohol - Pesto - And more Dljdpferivwfsx Ab Tsa This is a robust machine powered by compressed air and 220V, fully Plug and Play! Ideal for small-batch filling operations. Even a small compressor is sufficient to operate this machine. A compressor can be supplied upon request. The filler features a 500ml cylinder, enabling a maximum fill volume of 500ml per cycle. For larger volumes, multiple cycles can be programmed. The minimum stroke is 50ml, and any volume between 50ml and 500ml can be dispensed in one cycle. The unit comes with a large 25L hopper. Optionally, it is possible to connect the system to an IBC or 200L drum, allowing for faster processing of larger batches. The machine is equipped with a foot pedal and automatic mode. In automatic mode, it continuously fills, making high-volume filling quick and efficient. With the foot pedal, operators can fill at their own pace. Depending on operator speed and fill quantity, 15–25 units per minute can be achieved, making this a very fast machine. It weighs approximately 15–20kg and is easily placed on a tabletop. The entire structure is made of stainless steel, ensuring high quality and durability. If you have any questions, please email us; we are happy to assist you with this or other machines. We also offer a labelling machine that pairs perfectly with the filling machine. We strive to respond within 24 hours and are available on working days from 09:00 to 17:30.

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Dlodpfx Aewy Uu Aob Tja

Condition: ready for operation (used), functionality: fully functional, operating pressure: 12 bar, pressure: 28 bar, oil tank capacity: 200 l, Parameters Manufacturer: Howden Power A/S (Denmark) / PMC Technology A/S Model: BTVAB-7 (Hydraulic Oil System for BTV-7) Year of manufacture: 2007 Pumps: 2 × 5.5 kW motors, 1410 rpm Flow rate: 12 cm³/rev Operating pressure: 12 bar Maximum pressure: 28 bar Oil tank capacity: approx. 150–200 L Filtration: Magnehelic pressure differential gauges, multi-stage filtration Piping: Stainless-steel hydraulic lines Configuration: Dual-pump system (duty + standby) Djdpoxy Hk Tjfx Ab Tsla Condition: Structurally sound, fully complete Origin: Elektrėnai Power Plant (Lithuania) Application: Lubrication and hydraulic actuation for BTV-7 bearings and mechanisms Fully equipped Howden / PMC Technology hydraulic oil system, designed for lubrication and hydraulic control of heavy-duty industrial bearings and damper mechanisms. The system includes two hydraulic pump motors, complete stainless-steel piping, pressure control blocks, flow meters, and Magnehelic filtration indicators. Originally part of the BTV-7 booster draft fan set at Elektrėnai Power Plant and used only intermittently. Mechanically intact, ready for recommissioning after basic cleaning and servicing. Suitable industries: Power plants Biomass & waste-to-energy plants Petrochemical & refinery applications Steel & heavy industrial facilities Industrial ventilation & draft systems Any operation requiring high-reliability hydraulic lubrication units