Used Cold Store for sale (3,533)

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. Gujdpfxoq Ukvxj Afijh The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: excellent (used), Technical data: Bandsaws KASTOdisc Machine type M7 Gjdoucnuwopfx Afijuh Technical Data Cutting area 135x80 mm Drive power saw gear. 1.3-1.8 KW Cutting speed 33/60 m/min Saw feed Hydraulic Manuel Saw blade dimensions 315x2.5x32 mm Material support. with base frame mm Machine dimensions Length/width 600x800 mm Height 950 mm Weight of the machine 270 kg

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Gusdpfx Aeh A S Htefieh Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Year of construction: 1996, For Sale: Adige TC 720 Tube Cutting Machine + Adige ST 660 Deburring Unit – Year 1996 We are offering for sale an Adige TC 720 automatic tube cutting machine together with the matching Adige ST 660 deburring unit. The machines are from the year 1996, and the complete bar feeder system is included in the package. The bar feeder motor has been replaced and is equipped with a Siemens control system. The package also includes new spare rubber wheels for the material feeding system. Technical Specifications – Adige TC 720: • Cutting capacity (round solid bar): Ø12 – Ø30 mm • Cutting capacity (round tubes): Ø12 – Ø80 mm • Cutting capacity (square profiles): 10 × 10 mm up to 70 × 70 mm • Cutting capacity (rectangular profiles): 15 × 10 mm up to 80 × 70 mm • Minimum cutting length: 50 mm • Maximum cutting length: approx. 3,000 mm (with bar feeder: up to 6,500 mm) • Cutting method: circular saw Godpfxswlkiyj Afieuh • Control system: Siemens • Electrical requirements: 400 V / 50 Hz / 3-phase • Power consumption: approx. 10-12 kW • Dimensions: approx. 8000 × 1800 × 2000 mm (L × W × H) • Weight: approx. 2,100 kg Adige ST 660 – Deburring Unit: • For internal and external deburring of cut tubes and profiles • Designed to operate in sync with the TC 720 • Dimensions: approx. 2000 × 800 × 1600 mm • Weight: approx. 1,700 kg Included Accessories: • Complete bar feeder system – Engine replaced – Controlled by Siemens system • New spare rubber drive wheels

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach PVB150 Mobile Cold Asphalt & Emulsion Mixing Plant Turkey’s First Fully Mobile Dual-Mode Plant! Polygonmach PVB150 is a cutting-edge mobile solution specially designed for cold asphalt production, emulsion-based mixes, and road maintenance materials. This powerful system supports Volumetric and Batch operation modes — all in one compact and mobile unit. Whether you’re building rural roads, patching highways, or producing environmentally friendly mixes, the PVB150 delivers performance, flexibility, and cost savings directly to your jobsite. ⸻ ✅ Specialized for Cold Mix & Emulsion Applications • Cold Asphalt Mixing Mode: Up to 200 m³/hour on-demand production, perfect for binderless and emulsion-stabilized mixes • Emulsion Mixing Mode: Precise control for polymer-modified bitumen and emulsified asphalt blends • Low-Temperature Operation: Energy-efficient and ideal for off-grid, rural, or urban environments • Recycling-Ready: Supports RAP (recycled asphalt pavement) and eco-friendly binder integration ⸻ Gjdsw Hzmljpfx Afisuh ? Advanced Design – Built for Road Projects • 3x8 m³ aggregate hoppers, 5-ton cement/emulsion silo, and integrated water/additive tanks • High-precision weighing & dosing for binder, aggregate, and water • Fully automatic or manual operation via smart control panel • Mobile frame with self-lifting chassis – set up in 10 minutes • On-site production = zero material waste, no transportation delays ⸻ ?️ Multiple Functions – One Mobile Solution In addition to Cold Asphalt and Emulsion, PVB150 can also operate as: • Mechanical Stabilization Plant • Soil Compound Mixing Plant • Standard Concrete Plant (Volumetric + Batch Modes) ⸻ ? Mobile | Sustainable | High-Performance | Made in Turkey Say goodbye to fixed-site plants and expensive transport. With Polygonmach PVB150, your site becomes your plant. ⸻ ? Contact us today and take control of your road projects! ? ? ?

Year of construction: 2004, condition: ready for operation (used), Number of forming stages: 5, pressing force: 250t, max. wire diameter: 23mm, cutting length: 180mm, ejector stroke die/punch: 140/60mm, tool dimensions length/diameter knife: 70/56mm, die: 200/110mm, punch: 227/90mm, weight: 52t, with enclosure, an inspection is possible. Gjdpsnl El Tsfx Afiouh

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw Gjdpfx Afjubbw Aoiouh for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced

Condition: excellent (used), Year of construction: 1989, Pressta Eisele Emmegi Saw 550mm discs Guedsg R Ifgjpfx Afijh EU shipping ~300 euros

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) Gusdped N H A Nsfx Afish - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: good (used), Year of construction: 1972, Specification VMS II Cut at 90° (Flat) approx. 140 × 70 mm Cut at 90° (Round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (Flat), Round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Guodew Ecydjpfx Afioh Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

Condition: new, Year of construction: 2025, Applicable material: Concrete ? Polygonmach PVB150 Mobile Concrete Plant | A First in Turkey! ? Cold asphalt plant Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses Gsdpjw Hzhvofx Afisuh • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: ready for operation (used), Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. Gsdpfx Asr I Abiofiouh

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 Guedpjpxri Uefx Afijh volt 380 V frequency 50 Hz weight of the machine ca. 500 t

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Gedpfx Asd Tp Nlofieuh

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Gujdequzd Rspfx Afish Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, mileage: 361,050 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 2,700 kg, maximum load weight: 800 kg, first registration: 03/2013, emission class: euro5, color: red, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, electronic stability program (ESP), Performance/Engine: 2,143 cm³, with turbocharger Axles: 4x2 Brakes: Disc brakes Gusdpfx Afew Nckcsioh Cab: Electric windows, external temperature display Refrigerated body: Cold Car, bunker doors/ice, 5 doors on the left, 5 doors on the right Refrigeration unit: Copeland, eutectic cold storage system, cooling down to -33°C Other equipment: Power steering, immobiliser Battery management* ID: 117566 -33°C Front axle with increased load capacity Electronic Stability Program (ESP9i) Reinforced rear axle stabilisers underneath the frame Reinforced stabiliser on the front axle Lockable glove compartment Overhead storage above windscreen 6-speed manual transmission ECO Gear Wheelbase: 3665 mm 3.5 ton vehicle Driver seatbelt warning system Automatic headlamp dimming to parking lights Adaptive brake light Engine spec EEV Engine: OM 651 DE 22 LA, 70 kW (95 hp) at 3,800 rpm Passenger seat adjustable Driver airbag Smoker package Video: Video: Plate (eutectic) cooling is a refrigeration system that uses eutectic plates to maintain the required temperature level. The passive plates are connected to the power supply (380V) overnight. The freezing point of the eutectic solution is -33°C. The eutectic plates serve to maintain the temperature of already frozen products. We constantly have a wide selection of used refrigerated and ice-cooling vehicles in stock. You can find more from our offer at Non-binding offer, sale only to commercial customers, errors and prior sale subject to change Advertisements and company logos on vehicles may have been digitally altered in photos.

Condition: ready for operation (used), Saw blade diameter: 400mm, cutting speed: 28m/min, working height: 1050mm, power: 5kW. Cutting range 90°: round material: 130mm, square material: 120mm/120mm, flat material: 260mm/80mm. Cutting range 45°: round material: 130mm, square material: 110mm/110mm, flat material: 180mm/80mm. Machine dimensions X/Y/Z: approx. 1250mm/1250mm/2000mm, weight: approx. 1200kg. On-site inspection is possible. Guedpfx Afevnub Heioh

Condition: used, Year of construction: 1977, miter ja clamping ja kW mechanical Senkung weight of the machine ca. 500 kg Gusdpfx Asvxlthefieh

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Gjdpfx Afeuz If Noiouh Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 Godpovu Hlkofx Afiouh voltage 380 V clamping ja kW miter ja weight 700 kg

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Gsdpfxsf Dwa Uj Afiouh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: Gedpsd N Sm Dofx Afiouh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2001, volt 400 V weight Stück 490 kg 2 miter ja Gjdpfx Aou T Sfbsfijuh 175 mm Rund

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t Guedpfx Aelug Tuefijh number 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2003, saw blade diameter max. 300 mm speed setting 2 Stufen inkl. 120 mm weight 450 kg Gjdpfsud Tq Tsx Afijuh