Used Cold Buffet for sale (1,346)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Blsdpfxsy Hkd Hs Ak Eog Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2003, Max. saw blade diameter: up to 300 mm Machine head tiltable: 45°-90°-45°-30° Cutting diameter at 90°: 100 mm Square tube: 85 x 85 mm Flat profiles, hollow: 130 x 85 mm Speed range: 40 / 80 rpm Drive power: 1.0 / 1.2 kW Machine dimensions (L x W x H): 650 x 600 x 1650 mm Weight: 185 kg Accessories / Special Features: Bledpfx Akey E Ullj Eog • Vertical guidance of the saw head • Continuously adjustable mitre facility 45°-90°-45°-30° • Infeed/outfeed roller conveyors, each approx. 1 m in length • Manual feed • Coolant system • 1 saw blade included • CE compliant This very good VMS 300 is from a training workshop. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2013, functionality: limited functionality, saw blade diameter: 370 mm, cutting height (max.): 100 mm, feed length X-axis: 1,000 mm, total length: 2,450 mm, total height: 1,900 mm, total width: 1,750 mm, overall weight: 1,060 kg, cutting diameter: 100 mm, cutting length (max.): 99,999 mm, working height: 1,000 mm, The machine can be tilted to 45°. Further technical details are provided in the user and maintenance manual, which is included with the sale. If you have any further questions, please feel free to contact us by phone or email. Kind regards, Weber Geländersysteme. Bjdpfjx Di S Uex Ak Eolg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4200 € 315 mm 315x32x63 mm 45 / 90 U/Min 45 ° 45 ° rund 105 mm / quadratisch rund 90 mm / quadratisch rund 90 mm / quadratisch 1,3 / 1,8 kW Bodpfx Aewmzfzsk Eelg 600 mm 1000 mm 1400 mm 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split vice (clamps before and after the sawblade) Sawblade not included

Condition: new, neu Bodoynngaopfx Ak Eslg ca. 10 Wochen ab Auftrags Türkei 4500 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 600 mm 1000 mm 1400 mm 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total width: 4,450 mm, total length: 4,550 mm, total height: 2,360 mm, temperature: 2 °C, We are offering this very well-maintained Viessmann cold storage room, year of manufacture 2017. Bedpoyku N Tsfx Ak Eslg Manufacturer: Viessmann Year: 2017 Condition: very good Category ID: 261 Type ID: 1147 Machine type: Cold storage room Internal dimensions: 4.55m (L) x 4.45m (W) x 2.36m (H) Walls made of 80mm sandwich panels Floor made of 80mm sandwich panels Compressors: Tecumseh Silensys Evaporator: Kelvion Refrigerant: R134a The cold storage room was used for storing pharmaceuticals. It is still fully operational. Dismantling must be carried out by the buyer. If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Very well-maintained Behringer VMS 370 A, including infeed and outfeed roller conveyors. The machine is now in stock, refurbished, and available for immediate delivery. Bodpfoy Edcyex Ak Eelg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Clamping, sawing, return to initial position, opening in automatic mode Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Bsdpfx Akey Httdj Eolg Round: 140 mm diameter Mitre cut: 120 mm Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Voltage: 400 V

Condition: not inspected (used), functionality: unexamined, total width: 1,200 mm, total length: 3,000 mm, total height: 1,500 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Overall length: 3,000 mm Overall width: 1,200 mm Overall height: 1,500 mm Machine weight: 2,000 kg Bsdpfxsy D Tl Us Ak Ejlg External reference: 41

Year of construction: 1970, condition: not inspected (used), functionality: unexamined, overall weight: 2,000 kg, total length: 3,000 mm, total width: 1,200 mm, total height: 1,500 mm, machine/vehicle number: 779, No reserve price – guaranteed sale to the highest bidder! Bledpfxoy D Tkds Ak Eeg Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Diameter: 5.4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,200 x 1,500 mm Machine weight: 2,000 kg External reference: 40

Condition: not inspected (used), Year of construction: 1958, functionality: unexamined, machine/vehicle number: 202, wheel diameter: 885 mm, production capacity: 4,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Maximum bolt diameter: 7.7 mm Maximum thread: M8 Maximum shank length: 90 mm Minimum shank length: 20 mm Output: approx. 35/53/70 pcs/min Flywheel diameter: 885 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 1,500 mm Machine weight: 2,500 kg External reference: 42 Bjdpfoy D Tfhex Ak Eslg

Condition: used, Year of construction: 2007, saw blade diameter: 350 mm, Blade tilt -45° / +45°. Maximum vise opening 180 mm. Maximum length 385 mm. Blade diameter 350 mm. Blade rotation speed 1700 / 3400 rpm – 2 speeds. Blsdsywvrqjpfx Ak Esg The machine comes from a factory closure. After switching on, all axes function, the machine calibrates, and the blade operates at two speeds. I am not familiar with its programming, therefore the automatic cutting function has not been tested. The set includes several additional blades for different materials. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is located 120 km from Kraków Airport (KRK). Transport possible. Export price.

Condition: new, dimensions of saw-blade 350x32x4 mm vice 180 mm Blsdpfx Akjy Dh Nns Eog 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: used, Year of construction: 2023, gebraucht 2023 6246 prompt, Zwischenverkauf v Italien 2970 € 1 300 mm 300 x (2)2,5 x 32 mm 33/66 U/Min 45 ° 45 ° rund 102 mm, Quadratprofi rund 90 mm, Quadratprofil rund 80 mm, Quadratprofil 500 mm 1050 mm 990 mm 135 kg demo machine / mint condition net price vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade Blodpfxey Dh Iko Ak Eeg operating manual in German or English

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm Bedpjfmck Hjfx Ak Eelg clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, saw blade diameter 350 mm Bsdpfjfgpdlsx Ak Eolg capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. FCA D-71263 Weil der Stadt – loaded onto truck Bljdpfxjy Dcr Dj Ak Eeg

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm Blodpfx Aoy Dcrwjk Eeg - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Bedpoy Dcqysfx Ak Ejlg Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation Blodpfx Akey Azv Se Eeg

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min total power requirement 3,4 kW Bjdpsy Aytvjfx Ak Eslg weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Blsdpfx Ajxdciaok Eeg Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min Bjdpsy Ehx Esfx Ak Ejlg total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 92361, overall weight: 270 kg, Circular saw for cutting steel and steel pipes Year of manufacture: 2011 Weight: 270 kg Prepayment required Shipping costs not included Bljdpfxewlz I Tj Ak Eeg Can be inspected upon request.

Condition: good (used), Year of construction: 1998, saw blade diameter: 300 mm, For sale is an MEP Tiger 300, a high-quality circular saw for metalworking. This machine was built in 1998 but is in good condition. It is perfect for workshops and production environments that require a reliable and precise sawing solution. Bsdpfov Tlcrsx Ak Eslg Machine Features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of Manufacture: 1998 Saw Type: Semi-automatic/Manual Circular Saw Saw Blade Diameter: 300 mm Cutting Capacity: Suitable for round materials, square profiles, and miter cuts Cutting Angles: 90° and 45°, with miter cuts in both directions Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant Supply: Integrated cooling system for better cut quality and extended saw blade life