Used Coiler Decoiler for sale (423)

Condition: used, carrying force: ca. 50 kg tape width: bis ca. 50 mm tape exterior-Ø: 750 mm engine: 400 V, 390 Upm, 0,25 kW space needed: 850 x 600 x 1350 mm weight: ca. 100 kg Nedpfx Adjc Rf Sle Necl

Condition: ready for operation (used), De uitrusting bestaat uit: - 3 afwikkelaars Elba 5 ton capaciteit - 1500 mm - Richtunit RAS 26.45 - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen RAS 82.16 - Ras vouwmachine snelheid: 15 m/min Vermogen: 16 kW Ncjdpfx Adewwbf No Nel

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Nodpjpvlf Sefx Ad Nscl Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Year of construction: 2008, condition: ready for operation (used), A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible. Ncjdpfxjxgucwe Ad Nel

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Nodpfx Adjxd Rgms Nocl - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm Ncedpfx Adsxd Rgas Njl

Condition: new, Year of construction: 2025, neu 2025 070116 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws Njdpfxewv H Awo Ad Nscl speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Ncodeif Sg Sepfx Ad Nsl Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational Ncedpfx Ashx R Etsd Nel

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition Njdpshubgwefx Ad Njcl

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t Njdpfx Adsxayy Ie Necl coil OD: max. 1.600 mm

Condition: excellent (used), strip width: 160 - 1.050 mm strip thickness: 0,4 - 3 mm Nedpfjxayynox Ad Necl reference material (tensile strength): 420 N/mm² coil weight: max. 7,5 t coil OD: max. 1.600 mm

Condition: good (used), Coil reel, decoiler, recoiler Load capacity: 10 tons Expansion range: up to 508 mm internal diameter Expanding mandrel length: 1500 mm Several units available Frequency inverter control (FU control) Nodpfxsipx Ufo Ad Njcl The control cabinet has been newly refurbished. Hydraulic clamping of the coil. The reel can be moved laterally by hand using 4 rollers. Year of manufacture and manufacturer unknown.

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm Ncsdpsw U R Adefx Ad Nel reference material (tensile strength): 600 N/mm² coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011

Condition: excellent (used), Year of construction: 2011, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² Ncjdpfxow U Rzto Ad Nel coil weight: max. 15 t coil OD: max. 2.000 mm year: 2011

Condition: ready for operation (used), (Merk is oorspronkelijk Georg Fischer, overgenomen door Hämmerle AG) Compacte machine van Zwitserse makelij die gebruikmaakt van een automatisch nivelleringsdruksysteem om onderdelen recht te zetten en spanningsvrij te maken. Toepassingen: fijngestanste onderdelen - koppelingsplaten - remschijven - zaagbladen - vliegtuigonderdelen - laser- en plasmagesneden onderdelen - vlakmaken van onderdelen vooraf aan robotlassen/-slijpen. - voorkomen doorbuiging met 19 teruglopende rollen - 11 tegenrollen in onderste positie - 10 tegenrollen in overwegend positie - boven- en onderrollen zijn voorzien van hydraulische motoraandrijvingen - overbelastingsventielen voorkomen schade aan de machinedeur, overbelasting of verkeerde instelling - snelle insteltijd, vereist invoer van 3 parameters (ingangsspleet - uitgangsspleet - invoersnelheid) - snelheid van de machine: 2-20 m/min maximale breedte: 750 mm maximale dikte: 12 mm min. onderdeellengte: 100 mm vermogen: 31kW totaalgewicht: 10 ton Nodpfjv Rwcrjx Ad Njcl

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler ITEM I : 6-ton X1250MM hydraulic tensioning, power feeding, with pressure arm. Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1250mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4KW, with a forming speed of 25M/min in conjunction with the main engine Delta inverter The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Customer provided gas source Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation Other terms 1. Voltage standard: 380V/50HZ/3Ph 2. Operation nameplate: English/Chinese 3. Paint color: Nsdpfx Adjw Nqi Hs Nscl Uncoiler body RAL5015 (blue) Oil cylinder: red; Uncoiling mechanism

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler 6-ton X1250MM hydraulic tensioning, power feeding, with loading trolley and pressure arm Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Ncjdpfx Aow Nfi Uod Njl Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1500mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4.0KW, matched with main machine forming speed 25M/min Delta inverter The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation 6-ton feeding machine trolley 4-column design The car is moving on the I-beam at the bottom of the feeding machine Up and down travel distance of the car: Max 350mm Front and rear travel distance of the car: Max. 2000mm Voltage: 380V/50Hz/3Ph

Year of construction: 1998, condition: excellent (used), The machines of the S series work fully automatically. They are used to manufacture compression and form springs that are wound to the left and right. The spring can be either cylindrical or single or double conical. The S series is characterized by the highest production and quality standards, which are also met in multi-shift operation with minimal monitoring. The machine is built according to the latest state of the art and the recognized safety regulations. The machines of the S series work fully automatically. They are used to manufacture compression and form springs that are wound to the left and right. The spring body can be either cylindrical or single or double conical. The S series is characterized by the highest production and quality standards, which are also met in multi-shift operation with minimal monitoring. Ncedeiulgxspfx Ad Nel The machine is built according to the latest state of the art and the recognized safety regulations. The machine is used exclusively for the fully automatic production of left- and right-handed compression and form springs with a cylindrical, single or double-conical spring body. Machine weight / dimensions Machine net weight 250 kg Length 720mm Width 540mm Height 1350mm Noise emission

Year of construction: 1992, condition: good (used), Working Schenker FA -20S for sale. Machine in good condition, more informations by phone or email. Ncjdpfx Adoiiq Nus Nsl

Year of construction: 1998, condition: excellent (used), Schenker FA-10T torsion spring coiler in good condition Nedpfx Aoiu H T Red Nocl

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes Ncsdpfx Aov I Ur Eed Nel - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm coil weight: max. 4 t coil OD: max. 1.250 mm year: approx. 1980 Ncjdewzuwtjpfx Ad Nol

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm Ncodpfx Adewzu E Dj Njl mandrel Ø: 508 mm year: 2012 (never used)

Condition: used, functionality: fully functional, Year of construction: 1980, machine/vehicle number: D02L/7983, Offer Number: D02L/7983 Machinetype: decoiler (motorized) Info: horizontal Make: WAFIOS Ncodpfswi Sx Rjx Ad Njl Type: AHL2 Constr. year: 1980 max. coil diameter: 1000 mm Location: In our warehouse