Used Coiler Decoiler for sale (435)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Ksdpfxsxiyx Ns Afisnc

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Strip witdh: max. 100mm Outer diameter: max. 1.200mm Kodpoh T Ducjfx Afisnc Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: used, Year of construction: 1985, Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Knedpfx Afexdl Nioiec Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Condition: good (used), load capacity: 200 kg material width: 200 mm coil inner diameter: 240-500mm Knodpfxsihvdrs Afiec Coil outer diameter: 1200mm

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table Knodpsd Ha E Ssfx Afioc strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft Knodpswvv Rqsfx Afioc - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Ksdpfxoxd Rgms Afionc - max coil width: 1.250 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Knsdpjq A Tw Rsfx Afioc Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: used, Year of construction: 1976, material width 400 mm coil weight 3,0 t coil internal diameter 460 - 560 mm coil external diameter 1500 mm Kedpfx Afovzxq Esienc material thickness 0,6 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm number of draw-in rolls 2 x 120 mm power capacity 5,0 + 1,5 kW dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m weight decoiler 1,8 t dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m weight straightener 1,3 t Straightening machine (type RS 67-04 / 0) with geared motor, driven lower straightening rolls, straightening rolls hardened and polished, straightening rolls individually manually adjustable, pneumatic intermediate lifting of the in-feed rolls, roller basket, coil loop control Decoiler (type BA 1-04/030) not driven, with lag break, manual centralized expansion, hydraulic snubber roll, lateral movement, hydraulic lifting table as is where is, WITHOUT putting into operation

Condition: good (used), Manufacturer: LIV load capacity: 2x2t maximum plate width: 310 Knsdpfx Afoi Azy Hoijc coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Year of construction: 1980, condition: used, strip width: max. 2.000 mm Kedpfxsckanpo Afisnc strip thickness: 0,4 - 4 mm coil weight: 20 t cone Ø: 300 - 1.000 mm

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm Knjdpfx Afsxd Rgaeijc - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Kjdpstgvgpefx Afijnc Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Year of construction: 1978, material width 500 mm coil weight 6,5 t material thickness 0,5 - 1,5 mm coil internal diameter 420 - 560 mm coil external diameter 1500 mm no. of straightening rolls 17 straightening roll diameter 50 mm number of draw-in rolls 4 speed 6 - 60 m/min dimensions of the straightener (WxDxH) 2,3 x 1,3 x 1,7 m Knedpfjvuunaex Afijc dimensions of the decoiler (WxDxH) 1,3 x 1,2 x 2,0 m straightener (type R 500) with infinitely variable drive, adjustment of the roller box manual centralized double decoiler (type LH 2-1,5-500) with hydraulic centralized expansion, hydro-mechanical lag break as is where is, WITHOUT putting into operation, WITHOUT hydraulic aggregate

Condition: good (used), Year of construction: 1998, Manufacturer: LIV load capacity: 2x2t Knsdpfx Asi D Dxysfisc maximum plate width: 310 coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm Knodpebh S Dpsfx Afisc strip thickness: max. 3 mm coil weight: 2 t mandrel Ø: 406/508/610 mm

Condition: good (used), Year of construction: 1998, Manufacture: LIV Load capacity: 2x2t max plate width: 310 Knedpfji D D Euox Afijc coil inner diameter: 380-460mm Max roll outer diameter: 1200mm

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm Knjdpfed Ha E Aox Afisc strip thickness: 0,6 - 3 mm coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: good (used), dimensions (l x w x h)approx. : 3550 x 2400 x 2300 mm Knedpfx Afehhyzcjiec weight approx. 7000 kg coil weight : 6000 kg: Coil width 1250 mm Max coil diameter: 2500mm Coil inside diameter: 480-510mm Without control cabinet!

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm Kodpfx Afjd Ha E Ieienc coil weight: 6 t mandrel Ø: 508/610 mm

Year of construction: 1988, condition: used, decoiler - expansion mandrel with coil lifter Kodpfsbh S Hkjx Afijnc Bandbreite: max. 400 mm Banddicke: 0,3 - 4 mm Coilgewicht: 4 t Dorn-Ø: 508 mm

Year of construction: 1977, condition: used, strip width: max. 800 mm Kjdpebh Sz Ssfx Afisnc coil weight: 12 t mandrel Ø: 450 mm

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm strip thickness: 0,4 - 8 mm Knjdpfxobh S Dys Afisc coil weight: 13 t mandrel Ø: 508 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm strip thickness: 0,2 - 4 mm coil weight: 5 t mandrel Ø: 406/508 mm Knsdebh S E Eepfx Afioc

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm Knedpfx Afoupg Sceiec coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009