Used Cogeneration Chp for sale (218)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Preventive maintenance carried out immediately prior to shutdown (2022): - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Fjdpfxeytq Eis Ak Uspl Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset - Gas train - Control panel - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 122,000 h, functionality: fully functional, power: 250 kW (339.91 HP), number of cylinders: 8, Used combined heat and power (CHP) unit, manufactured in 2010, for sale, complete with container. MAN gas engine overhauled in 2024 (proof of overhaul available in the form of an invoice). Fjdszkwc Iopfx Ak Ujpl

Year of construction: 2018, operating hours: 4,700 h, condition: ready for operation (used), functionality: fully functional, For sale are four used cogeneration units, type ENGUL 310 XACB, in an open-skid design. The units consist of a gas engine, a generator, and the corresponding technical components. The systems have previously been operated with syngas/synthesis gas and are suitable for professional operators, plant builders, as well as projects for reuse, overhaul, or technically verified fuel conversion. Of particular interest is the low operating hours of approximately 4,700 engine hours. In addition, photo documentation and operating displays are available, which document the synchronous parallel operation of the four units. Fodpszyc Eaofx Ak Uspl

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, We are offering two new Totem 20 combined heat and power units (CHP) as well as a new Totem 10 CHP unit, year of manufacture 2016. These CHP units come from the liquidation of storage inventory. According to the previous owner, the units are eligible for CHP funding, as they have never been installed. However, this must be verified independently. The TOTEM 20 delivers a maximum output of 20 kW electrical and 48.5 kW thermal. The TOTEM 10 delivers a maximum output of 10 kW electrical and 25.2 kW thermal. For all further technical details, please refer to the uploaded datasheet and user manual. Depending on location, delivery within Germany or Austria can be arranged. Price negotiable. The new list price for a Totem 20 is currently approximately €57,000 (gross) and they are traded for €45,000 (see photo). We are offering you an unbeatable deal. Fsdpfxeytympo Ak Uepl If you have any questions or need more information, please feel free to send us a message or call us. We offer a start-up guarantee, meaning we will take the units back in the event of difficulties at start-up, but we do not cover any incurred costs.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Fodpfx Ajzxqd Iek Uopl Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 133,000 h, functionality: fully functional, rotational speed (min.): 750 rpm, rotational speed (max.): 750 rpm, input frequency: 50 Hz, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, Available complete natural gas power plant with Wartsila 18V34SG engine. The engine was running at full load with all maintenance performed. The fans for the cooling system are not included, only the heat exchangers. Brand: Wartsila Model: 18V34SG Generator brand: ABB Power: 5980kW Fodpfx Akoytq Tys Ujpl Fuel: Natural Gas Year of manufacture: 12/1999 RPM: 750 Operating hours: 133,000 hours We can offer 2 more units.

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Engine: MTU E3042L9 year 2016 23.000h operating hours, Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Fjdpfx Akoun I N He Uspl Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets 714KWe, thermal 1058KW, cooling 689KW

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data • Brand / Model: MWM – TBG 620 V16 K • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets Fpedeytq A Uspfx Ak Uel • Gas ramp • Cooling system • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm Fjdpfx Asxcudask Uopl  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Fedpfx Akezqam Aj Uepl Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding wheel diameter: 150 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, type of input current: three-phase, input current: 3 A, input frequency: 50 Hz, operating speed: 22 mm/s, grinding height: 30 mm, grinding length: 1,350 mm, grinding width: 90 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, overall weight: 455 kg, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Fedpfx Aozytw Hjk Uepl Coolant pump flow rate: 30 l/min Voltage: 400 V Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Condition: excellent (used), functionality: fully functional, Manufacturer AMADA Model AC255NT Year 2008 Machine type CNC Turret Punch Press Punching force 20 tons / 200 kN Drive system Single AC Servo Drive CNC control AMNC-F X-axis travel 1,270 mm Y-axis travel 1,270 mm Sheet capacity with repositioning Approx. 2,500 × 1,270 mm Max. mild steel thickness Approx. 3.2 mm Max. workpiece weight Approx. 150 kg Max. punching diameter Approx. Ø88.9 mm Fpjdpfx Aozzn Tlsk Ujl Turret configuration Depending on configuration: 45 / 51 / 58 stations Auto Index stations Depending on configuration Turret rotation speed Approx. 30 rpm Auto Index speed Approx. 60 rpm Max. punching speed Approx. 370 strokes/min Marking speed Up to approx. 900 strokes/min Punching accuracy Approx. ±0.1 mm Power requirement Approx. 19 kVA Air pressure Approx. 5 bar Machine weight Approx. 12,000 kg Machine dimensions Approx. 4,100 × 2,560 mm, depending on configuration Feeder Automatic sheet feeder / loading system Sheet size for feeder Approx. 1,250 × 2,500 mm fully functionel

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Fodpfx Aey Iu Hnjk Ujpl Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: good (used), Vertical carousel rack for carpet and flooring rolls. Robust and fully functional carpet paternoster / carousel rack. The system is ideal for space-saving vertical storage and presentation of carpet rolls, PVC flooring rolls, or other heavy rolled materials. Fsdpfxszz Icgs Ak Uepl Technical Details Length: approx. 4,000 mm Capacity: approx. 12–16 support bars / roll positions The carpet and flooring rolls belonging to the respective carousel rack can be purchased separately for an additional €1,000 net. Item location: Frankfurt am Main, Germany Collection period: Collection must take place between the end of September and the beginning of October. Option 1 – Self-collection: Dismantling and transport are carried out independently by the buyer. Option 2 – All-inclusive package: We can provide professional dismantling including delivery throughout Germany for a flat additional charge of €1,000 net plus VAT. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Fpsdpfoy Hiuqex Ak Ujl

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Fodpfx Aeyzcxrjk Ujpl

Condition: new, Year of construction: 2026, power: 180 kW (244.73 HP), number of cylinders: 12, cubic capacity: 25 cm³, nominal power: 200 kW (271.92 HP), Thermal output 320 kW Fedpfx Asy Urx Usk Uepl

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control Fpsdpfxex N T Rbj Ak Ujl - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications. Featuring a rigid steel frame and an 8-slide H-body structure, they ensure stable, balanced, and repeatable operation during pressing tasks. The CHP 150 model is specifically developed to deliver reliable performance and long service life for medium-capacity applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial use. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 slide bearings provide precise load transfer and extended operational stability. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 150 Type: Steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m. Perpendicularity Tolerance: 60 micron/m. Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK; EN ISO 15614-1:2017 welding certificate (audited by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Fsdpfjx N T Dzox Ak Ujpl Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approx. Height: 3650 mm Approx. Width: 2950 mm Approx. Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 800 t, stroke length: 800 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guided slide H-frame construction ensures balanced distribution of high forces generated during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed targeting reliable and stable performance for high-capacity production lines. Fpodpfxsx N T Nko Ak Usl CHP Series – Structural Features CHP series presses are engineered considering heavy industrial conditions. The frame and main supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise movement throughout the ram stroke. ⚙️ Standard Equipment • Steel construction with 8-guided slides in H-type press frame • Stress-relieved frame structure by vibration • Bronze Zr14 slide bearings • Welded joints approved with WPQR & WPS certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • DELTA 7” touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning system • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (standard for operator safety) • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 800 • Type: Steel construction, 8-guided slide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 800 tons • Movable Table Size: 1500 × 2000 mm • Fixed Table Size: 1500 × 2000 mm • Parallelism Tolerance: 120 micron/meter • Perpendicularity Tolerance: 60 micron/meter • Stroke (Ram): 800 mm • Min. Clearance: 100 mm • Max. Clearance: 900 mm • Welded Structure Stress Relief: Vibration stress relieving • Welding Process: WPQR and WPS certified by TÜRK-AK (according to EN ISO 15614-1:2017; inspected by certified welding coordination engineers per EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 75 kW – IE3 • Main Pump: 70 cm³ – REXROTH or PARKER • Movable Table Fast Approach Speed: 150 mm/sec • Movable Table Drawing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approx. Press Height: 6000 mm • Approx. Press Width: 3350 mm • Approx. Press Depth: 2700 mm • Lower Table Height from Floor: 1450 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Position Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Fodpfox N T Ruox Ak Uspl Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,500 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,400 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are engineered for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-guide H-frame structure delivers maximum rigidity and stability during pressing operations, ensuring parallelism and perpendicularity tolerances are maintained. The CHP 1500 model, equipped with a large bolster, robust hydraulic system, and high stroke capacity, provides a reliable solution for sectors such as automotive, defense, heavy metal forming, and industrial production lines. The frame is stress-relieved by vibration, guaranteeing long-lasting and stable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press structure • Vibration stress-relieved main frame • Bronze Zr14 slide bearings • WPQR and WPS welding applications approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch screen panel (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system Fpodpfx Akox N T R Us Ujl • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Operator safety protection systems • SIEMENS/SCHNEIDER electrical components 📐 Technical Specifications – CHP 1500 Type: Steel construction, 8-guide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 1500 Ton Moving Bolster Size: 1500 × 2400 mm Fixed Bolster Size: 1500 × 2400 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration stress-relief Welding: WPQR and WPS certified by TURK-AK, EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø620 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 6250 mm Approximate Width: 3750 mm Approximate Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 70 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, they provide high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used in slide bearings ensures long service life and stable operation. Highlighted Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welding applications in accordance with ISO standards - PLC control with touchscreen interface - Operator safety and process stability oriented design ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Fedpfxox N Tx So Ak Ujpl Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Tonnes Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/mtr Perpendicularity Tolerance: 60 micron/mtr Ram Stroke: 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified welding process accredited by TÜRK-AK (certified welding supervised by engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tonnes Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame structure ensures an even distribution of the high forces generated during pressing, providing long-lasting and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for demanding heavy-duty conditions. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 guide bushings provide smooth load distribution and high precision during ram movement. Fpjdpfx Aex N T Iaok Ujl ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibratory stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 600 - Type: Steel construction, 8-guide H-frame press - Frame Material: St52 – ERDEMİR - Guide Bushings: Bronze Zr14 - Capacity (Ram): 600 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress-relief - Welding Application: WPQR and WPS certified welding by TÜRK-AK accreditation with EN ISO 15614-1/2017 certificate (supervised by welding coordination engineers certified per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/s - Moving Table Forming Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Main Cylinder Inner Diameter: Ø550 mm – Ck45 - Die Cylinder Inner Diameter: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 5900 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2300 mm - Distance from Floor to Lower Table: 1400 mm - Pre-filling Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Displacement Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 28 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided Slide General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications requiring very high tonnage. The rigid H-frame structure with 8 guiding slides ensures maximum rigidity during pressing operations and maintains parallelism and perpendicularity tolerances throughout the full stroke. The CHP 2000 model, featuring large table dimensions, a high-capacity hydraulic system, and a powerful motor, offers a reliable and durable solution for the automotive, defense, heavy industry sectors, and high-tonnage production lines. The frame is stress-relieved via vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guided slides - Vibration stress-relieved body structure - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR and WPS certified welding procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system Fedsx N T Srepfx Ak Uspl - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2000 - Type: Steel construction, H-frame body with 8 guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress-Relief: Vibration stress-relieved - Welding Application: WPQR and WPS certified by TÜRK-AK, according to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 6300 mm - Approx. Width of Press: 3850 mm - Approx. Depth of Press: 2500 mm - Lower Table Height from Floor: 1500 mm - Main Fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.