Used Coating Machines for sale (66,144)

Condition: good (used), Year of construction: 2021, functionality: fully functional, total length: 4,200 mm, total width: 1,100 mm, total height: 2,300 mm, overall weight: 500 kg, Equipment: emergency stop, Automated system for the production of MNS masks. In good condition, immediately ready for operation, available for quick delivery due to company liquidation. Collection possible until 31.03.2026. Rodpfx Anex H Nm Hs Ast

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Rjdpfxsylm Tys An Aot

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Rodevz H N Nspfx An Aot Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Rodpfx Anevvw Nio Aet

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Redpfx Aneu Ixt Ds Ast

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Rjdsu Ixkpepfx An Ajt

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3 Rodpswhkhhjfx An Aot

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel Rodpfx Aevvwblsn Aot - Remote support on machine – allows remote diagnostics

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Rodpfjv Abm Eex An Aot Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Dimensions: 4900 mm x 1500 mm x 2300 mm.

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Rsdpfeuzlg Dox An Aet

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars Rjdpfxswzzlwe An Aot - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Rsdpfx Aneya Hvqj Ast Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Redpfsxa H Ewox An Ast If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. Redpowzmcbsfx An Ast OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V. Rjdpfswzl Hxox An Aot

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches Redewfgbrepfx An Ajt _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( Seri Bıçak Değiştirme Sistemli), - Robust mechanical structure capable of processing aluminum profiles with high quality - Medium recording practice of aluminum profiles in -45 / +45 degree angle ranges - Easy blade group change system - Easy angle adjustment with mechanical stops Redpfx Aoviq Ryjn Ast - Adjustable resting system according to four different profiles - Cutting speed adjustment with hydropneumatic system - Knife storage rack (4 pcs.) - Cutter fluid spray system - Max. process diameter : 160 mm - Max. Blade : 200 mm - Min : 90 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 ALUMİNYUM PVC ÇOKLU ORTA KAYIT ALIŞTIRMA MAKİNESİ, - Notching (milling) process with adjustable linear motor movement - 5 adjustable resting systems for different profiles - Quick blade change feature that makes work easier - Notching of center register profiles between 1/6 pieces Rsdpfoq U S Diox An Aet - Profiles are fixed in the machine with pneumatic vertical and horizontal clamps - Independent operation of vertical and horizontal clamps - Spare knife storage cabinet on the front of the machine - Notching (milling) of 2.5 meter long profiles by means of support arm - Maximum profile notch height ( h ) 140 mm OPTION - Spray cooling system - 220 volt operation

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL Rsdpeq U Tctsfx An Aet • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) Rsdpsq U S Ahefx An Ast OPTION - Hydro check system - Cooling System

Condition: good (used), Year of construction: 1999, Built in 1999 400 V; 50Hz 1.5 kW Linishing belt 100 x 1500 Belt speed 25m / sec. Weight approx. 50 kg Rodpoba Hz Usfx An Aet

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Rodpewfhu Hsfx An Aot Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: used, Technical specifications: Rotation of the bottles by brake motor. Holding bottles by 2 jacks. The changes of bottles 1/2, 1/1 sp, 2/1 can be executed very quickly. Automatic liquor blender ML1200: 1 X 4 Bottle turntable Output 1200 Bottles/Hour Air pressure 6 Bars Air consumption 6m3 Voltage (triphase) 380 V triphase Power 0,60 KW Rodpfxsx Iv Uge An Aet Weight ML 1200 : 150 kg

Condition: used, Die Flaschen, die durch eine Schraube selktionniert sind, sind dann auf dem rotierenden Karoussel, von einer Sterne geführt. Erster Gang : Degorgier : Die Flaschen sind erst vom Hals angegrifffen und die Körper der Flaschen sind dann von zuführenden Wege auf der schräg Stellung weiter geführt. Jeder Flaschen' Träger ist mit einem regelbaren Degorgier System und einem Daumen um Verlüste vom Wein zu vermeiden usgestattet. Zweiter Gang : Teil absaugen, bis zu 6 Centiliter (stehende Flasche). Dritter Gang : Dosierung der verschließen Flasche, gebracht zu 60 Grad schräg, Rodjx Iv Uaepfx An Ast Dosierung' s Kontrolle hoch und unter. Vierter Gang : Beifüllen (stehende Flaschen) vom Wein mit einer kleinen pneumatischen regelbaren Pompe um eine einwandfrei Füllung zu erleichten. Von starker und gepflegter Aufbau mit Rahmen und Gehäuse aus rostfrei Edelstahl von bester Qualität. Und der oberen Teil besteht aus dursichtigen Polycarbonate. Grund Maschine geeignet für die Zuführung von 0.75 Liter, 0.375 Liter, Magnum (1.5 Liter) Sektflaschen, und auf Anfrage spezielle Flaschen. Leistung : Bis 1 500 Fl/St m.electron. Variator Motor : 0.55 Kw Masse : Tiefe : 1630 mm / Breite : 1600 mm Gewicht : 550 Kg

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Rsdpfjv Ihgvox An Ajt