Used Cnc Turret Punching for sale (10,326)

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR Isdpfotrd T Tox Afiotn

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Itodsxn Nfvepfx Afion Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: excellent (used), Year of construction: 2002, Immediately available from ongoing operation Precise, high-quality, stable CNC BED MILLING MACHINE MAKE: REIDEN (CH) MODEL: BF 5 Z CNC HEIDENHAIN TNC 530 (UPDATE) Travel X-axis: 4000 mm Travel Y-axis: 1000 mm Travel Z-axis: 1500 mm Automatic tool changer: 40 positions Working table T-slots (H7): 4000 x 1000 mm Milling head ASK-2 with B-axis Main motor power AC: 24 kW Tool taper: SK 50 Spindle speed, gear steps: up to 5,000 rpm Feeds x, y, z: 2–8,000 mm/min Internal coolant supply: 20 bar Machine weight approx.: 24,000 kg Ijdpfxexpvace Afiotn Equipment: - Electronic hand-wheel HEIDENHAIN - Hydraulic counterweight system - Working table surface ground - Chip conveyor - Internal coolant through spindle (IKZ) - Air blast through spindle center - 3-step gearbox - CNC main board replaced - Sliding doors on machine bed (2) The machine is well maintained and fully operational – high accuracy UNDER POWER – AVAILABLE FOR INSPECTION ON REQUEST: DISMANTLING, LOADING, AND DELIVERY POSSIBLE Subject to prior sale.

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm Iodeuyyhaspfx Afijtn - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Year of construction: 2013, condition: used, CNC Bridgesaw Steub SBS 750 Used construction year 2013 Y-Axis 4500 mm X-Axis 3600 mm Z-Axis 900 m C-Axis 0-370° A-Axis 0-90° Fixed table: 3400 x 1500 x 650 mm Cutting Motor 18,5 kW Inkl. Software Itsdpfxexpuyhs Afijn

Condition: excellent (used), Measuring range X-Y-Z 600 x 600 x 250 mm Table size 697 x 758 mm MARCELS MASCHINEN AG Itodpoxpug Isfx Afien

Condition: good (used), Maho MH500W2 Control: Heidenhain TNC232B Year of manufacture: approx. 1988 Iodpfew Id Igex Afistn Spindle mount: ISO40 Spindle speed: 20-4000 rpm Feed rate: 1-3000 mm/min Table size: 700x350 mm Coolant system Documentation Travel paths: X: 500 mm Y: 380 mm Z: 350 mm Weight: approx. 1800 kg The machine was powered up until recently and is in good, fully functional condition.

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Iodew Aifzspfx Afijtn

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Itjdpoxpqy Defx Afijn Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Good (Currently still in production) Equipment and technical data: - Base machine 7018 - Machine table 320 with 6 consoles, pneumatically clamped, movable in X-direction - Drilling unit 7884, 14 spindles / 10 vertical spindles individually selectable - Integrated saw unit for cutting / grooving in X-direction - Milling unit 7830, 1-stage, power: 8/10.3 kW, HSK air-cooled, n(max) = 1,000 - 24,000 min⁻¹, infinitely variable - Vector axis (C-axis) / fully interpolating, 0° - 360°, infinitely rotatable - Tool changer 7996 / 12-place rotary changer, automatic travel in X-direction - Vacuum pump 100 m³/h, dry-running - Hand-held control device - Safety equipment: bumper - Positioning lasers 2 pcs. - Automatic central lubrication - 4 pneumatic lifting and lowering loading aids - Campus V6 software Processing dimensions for milling: X = 3,450 mm Y = 1,287 mm (minus cutter radius) Z = 180 mm Itodpsxppwhofx Afijn Total length: 6,720 mm Total width: 3,930 mm Total height: 2,471 mm Weight: 3,500 kg Location: NRW Availability: Approx. January 2026

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW Itodpfx Ajxppnmefion HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Itjdpfx Ajxpugbofisn Piece catcher attachment Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2022, axis stroke (X,Y,Z) 1800 x 900 mm Number of spindle head vertical 1 St. Number of spindles head horizontal 0 St. Dust suction hood 100 mm Number of milling agregates 1 St. working dimensions 1800 x 900 mm Year 2022 total power requirement 2,8 kw Dimensions (L/W/H) 2400 x 1400 x 1900 mm Isdpfx Afsvnwcgjiotn Motor output 2,2 kW Capacity 100 m³/h kg/h

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Iedpfx Asxpklajfijtn Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), sheet thickness steel (max.): 25 mm, back gauge: 1,500 mm, power: 66 kW (89.73 HP), total length: 3,390 mm, total width: 3,000 mm, total height: 3,500 mm, empty load weight: 25,000 kg, workpiece length (max.): 2,100 mm, CNC Elgo backgauge Adjustable cuttingedge: 0,3 > 3°30" Itedpfoxpkkisx Afisn

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Condition: Function tested Equipment and technical data: Milling unit: 6 kW, water-cooled Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Tool changer: 6-position, lateral Drilling head: 9 vertical drilling spindles, 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Groove saw in X direction Control: Twin CAM 32 Iodpfx Aoxpla Sefijtn Vacuum pump: 100 cbm/h Incl. vacuum suction cups Travels: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Installation dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Location: Emsland

Year of construction: 2018, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 291 mm MAX TURNING DIAMETER: 320 mm SPINDLE: 3200 rpm; 7,5-11 kW X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 350 mm RAPID FEEDS X-Z: 24 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TF Itedpsq Ilbwofx Afion WEIGHT: 3500 Kg OVERALL DIMENSIONS: 2214 x 2220 x 2713 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH 16-POSITIONS GANTRY-TYPE LOADING SYSTEM

Condition: ready for operation (used), Year of construction: 1998, operating hours: 52,715 h, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm A-Axis Movement +90° to -90° C-Axis Movement 360° Additional Equipment Iodpfx Asxpkmkefistn measuring probe not included This 5-axis Hermle C 800 U was manufactured in 1998. A CNC universal milling machine featuring a swivel rotary table with a 280 mm diameter, it operates with a Heidenhain TNC 430 CNC and a spindle cone of SK 40. With 67,073 operating hours, it remains in good condition. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Fanuc + 3 Breton machining centers Iedpfx Ajxpkhuofietn Max longitudinal travel X-axe: 18 000 mm

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Technical data: - Base machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968, 18 vertical drilling spindles with 32 mm pitch, individually selectable, arranged in T-shape: 12 on X-axis and 6 on Y-axis, max. drilling diameter 35 mm (depending on panel thickness), spindle stroke: 70 mm, rotation direction: alternating right/left, speed n = 4725 rpm, infinitely adjustable, 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946, 3.5 kW, 90° pneumatically tiltable, n = 5300 rpm, tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm, sawing / grooving in both X and Y directions - Milling unit 7935 with 6 kW spindle, water-cooled - Milling unit 7982 for lock case milling - Tool changer 7996, 18-position magazine (carousel) Itedpfx Aswlwn Nefisn - Vacuum pump with 140 m³/h - Hand control device - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: Poland

Year of construction: 2002, condition: ready for operation (used), - USED - 5-AXIS CNC LATHE MAX TURNING LENGTH: 760 mm MAX TURNING DIAMETER: 330 mm BAR CAPACITY: 65 mm SPINDLE: 4500 rpm; 11-15 kW; ASA A2-6 ; 210 mm COUNTER SPINDLE: 6000 rpm; 5,5-7,5 kW; 169 mm X-AXIS TRAVEL: 250 mm Y-AXIS TRAVEL: ± 50 mm Z-AXIS TRAVEL: 830 mm B-AXIS TRAVEL: 830 mm RAPID FEEDS X-Y-Z: 24 - 7,5 - 20 m/min DRIVEN TURRET HEAD: 12 POS; 6000 rpm CONTROL UNIT: FANUC 18i-T WEIGHT: 5350 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2060 mm Iedpsmmlprefx Afistn ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER NOTE: PART CATCHER WITH BELT; AUTOMATIC DOOR OPENING SYSTEM

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,150 mm, volledige CNC indexeerfreeskop (2x 2,5°) gereedschapswisselaar met 30 posities koeling door spindel Longitudinal travel X-axe: 3600 mm Itsdpfx Asxpkifefisn Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm

Year of construction: 1995, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 530 mm MAX TURNING LENGTH: 500 mm MAX TURNING DIAMETER: 340 mm BAR CAPACITY: 62 mm SPINDLE: 3800 rpm; 11-15 kW; ASA A2-6" X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 15 - 20 m/min Isdpjiidpysfx Afietn TURRET HEAD: 12 POS CONTROL UNIT: OKUMA OVERALL DIMENSIONS: 2815 x 2815 x 1745 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm Itodpfx Ajq H Tr Tofijn ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT

Year of construction: 1992, condition: ready for operation (used), - USED - BRIDGE-TYPE CNC GRINDING MACHINE LONGITUDINAL TRAVEL: 650 mm TRANSVERSAL TRAVEL: 450 mm VERTICAL TRAVEL: 500 mm VERTICAL SPINDLE TRAVEL: 130 mm TABLE SIZE: 770 x 630 mm MAX ADMITTED LOAD: 500 Kg DISTANCE BETWEEN THE COLUMNS: 750 mm DISTANCE BETWEEN SPINDLE AXIS-TABLE: 0-600 mm SPINDLE: 30.000 rpm CONTROL UNIT: FANUC 210 IS-M WEIGHT: 4000 Kg OVERALL DIMENSIONS: 2650 x 2000 x 3150 mm ACCESSORIES: RS 232 SERIAL PORT NOTE: MACHINE WITH SPINDLE 60/70.000rpm, SPINDLE 100/120.000rpm; MACHINE COMPLETELY OVERHAULED IN 2002 Ijdpfx Ajigrvdefijtn