Used Cnc Turning Centre for sale (16,689)

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Lrsdpfowym Nfex Ad Neg Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2003, Technical data: 5 axes: X; Z; Y; C, and B axis Turning diameter: 1250 mm Turning length: 1450 mm 2 pallet stations Travel paths (X/Y/Z): 1875 / 1550 / 1345 mm Lsdpjyctgnsfx Ad Nsrg CNC control: MAZAK MAZATROL 640 M Pro Chuck speed: max. 500 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Tool holder: SK 50 Further technical details on request Machine weight: approx. 55 t Accessories: Belt filter Chip conveyor Spindle cooling unit Oil cooler Infrared probe Various tools Tool cabinets The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, Advanced CNC lathe designed for refurbishment and precision machining of aluminium alloy wheels. This machine ensures professional surface finishing, damage removal and restoration of wheel appearance. Equipped with a CNC control system enabling quick programming of machining cycles with excellent repeatability and surface quality. Compact size and ergonomic design make it perfect for workshops requiring efficiency and precision in alloy wheel processing. Lrodpfx Adsycqluo Neg Technical data MAXIMUM TURNING DIAMETER OVER BED 690 mm MAXIMUM WHEEL DIAMETER 28 inches SPINDLE NOSE A2-6 SPINDLE BORE 82 mm CHUCK manual MAXIMUM SPINDLE SPEED 1500 rpm MOTOR POWER 6.5 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) Lrjdpfex U U Hbox Ad Nsg TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] More information available upon request.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available immediately and can be viewed under power. Upper X Y Z ballscrews fully refurbished mid 2023 by UK company. Included as shown in pictures -- Capto C4 milling -- Capto C4 turning holders Lrodpeycl Epsfx Ad Nog -- Capto C4 extensions -- 3 x Dual Capto C4 for turret -- Various other turret holders as pictured -- Part catcher arm + converyor (not used for a long time) -- Old version of CAMplete TurnMill with USB dongle TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW]

Condition: excellent (used), functionality: fully functional, cutting diameter: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i CONTROL MAX TURNING DIA 560 MM MAX WORKING LENGTH 2000 MM MAX SWING OVER BED 770 MM Lrodsyciq Aspfx Ad Njg SWING OVER SADLE 590 MM X Z AND C AXIS - 360 DEGREES 0.001 DEGREES HYD CHUCK 380 MM DIA HYD STEADY ( SMW BLOCK ) SPINDLE BORE 132 MM 12 STATION TURRET SWARF CONVEYOR QUILL DIA 120 MM MORSE TAPER 6 QUILL TRAVEL 120 MM POWER REQUIREMENTS 60 KVA FLOOR SPACE 4220 X 2180 MM WEIGHT 10 TON

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light Ledpfx Asxmhdned Njrg - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 01224, turning length: 750 mm, turning diameter over cross slide: 520 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, chuck outer diameter: 250 mm, We are offering this used OKUMA HOWA ACT 4 CNC turning and milling centre, year of manufacture 1985. Manufacturer: OKUMA HOWA Model: ACT 4 Year of manufacture: 1985 Condition: used Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling centre CNC control: Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm 12-position turret Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Incl. various tool holders New monitor: flat screen Lsdpsycg Tzofx Ad Norg Machine under power. Data sheet, documentation and manuals available Data transfer possible via laptop

Condition: excellent (used), Year of construction: 2019, operating hours: 3,140 h, functionality: fully functional, machine/vehicle number: 1162456, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-15,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   MACHINE EQUIPPED WITH:- Haas CNC control Swarf auger Wireless intuitive probing system 12 off BT40 toolholders High speed machining User definable macros Visual part programming system 4th and 5th axis interface (interface only, no 4th or 5th axis) High flow coolant system Lighting Enclosed guarding Manual Power on hours 3140 Cycle start hours 1519 Feed cutting hours 1149 Lrsdpfxsycf S Ae Ad Nsg

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 80801, turning length: 1,000 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 1,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, Equipment: rotational speed infinitely variable, CNC turning and milling center by Mazak, model 40N-ATC N/C (ST40ATC), year 1989. Mazatrol T-3E control, 4 axes, 30-position tool changer, driven tools, chip conveyor. Lrjdpjyccl Hjfx Ad Nog

Condition: like new (used), Year of construction: 2019, We are selling a 5-axis CNC woodworking machining center manufactured in 2019, equipped with a versatile FLEX5 cutting unit with a rotation range of 0-360° and a tilt angle of 0-90°. It is equipped with an 8-slot tool changer and a C-axis on the main spindle, which increases its accuracy and flexibility. It handles cross-sections from 20 x 50 mm to 200 x 455 mm and supports wood lengths up to 13,300 mm. Lrsdpfxsxalnws Ad Njg

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min Lredpfx Adsud Al He Nsg x-travel 1000 mm y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm Lrsdpfxjrc Ip So Ad Nog workpiece length - max. 100 mm

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Lredpfoxftkqex Ad Njg Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre Lodex Uxdqjpfx Ad Njrg * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Lrsdpjuda Tnsfx Ad Njg Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 Lrjdpfx Adjvyli Es Neg collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: ready for operation (used), Swing diameter over bed/cross slide: 800mm/500mm, max. turning diameter: 590mm, max. turning length: 650mm, spindle power: 30kW, speed: 2500rpm, bore: 105mm, bearing: 160mm, travel X/Z: 300mm/670mm, rapid traverse X/Z: 12m/min/16m/min, tool positions: 8. Machine dimensions X/Y/Z: approx. 1850mm/2700mm/3100mm, weight: approx. 8500kg, control: Fanuc. The spindle controller constantly goes into overload and is therefore defective. Dokumentation vorhanden. An on-site inspection is possible. Lodpfx Adexyk T Ss Norg

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, Ledox T Dhlspfx Ad Nerg sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 1,000 mm, turning diameter: 90 mm, spindle motor power: 40,000 W, spindle speed (max.): 4,000 rpm, torque: 190 Nm, total height: 2,550 mm, total length: 4,325 mm, total width: 2,350 mm, bar diameter (max.): 90 mm, overall weight: 14,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main and sub spindle C-axis VDI 30 turret (Turret II) Ledjx T A Drepfx Ad Njrg Drill breakage control High-pressure system Cooling unit Eco-Fluid coolant lubrication system KNOLL chip conveyor Irco Breuning short bar loader

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of drilling spindles: 14 Total number of tool changer positions: 6 Lrjdpjx A Tinefx Ad Nsg

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min Lredpfjxbtqiox Ad Nsg travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° Ledsx Tulnjpfx Ad Nerg B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2019, functionality: fully functional, >turning diameter 230/300 mm >turning length 452 mm >greatest pass round over bed 700 mm >control Fanuc >spindle passage 65 mm >spindle speed: 4500 U/min Lsdpfx Aoya Edgsd Nerg >spindle motor 15/11 kW >max. torque on the spindle 179 Nm >no. of tools in turret: 12 BMT 55 >driven stations: 12 BMT 55 >speed of driven tools 5000 U/min >drive milling spindle 5,6/3,7 kW >y-axis +/- 60 mm >sup spindle 7,4/4,9 kW >Spindlespeed subspindle 6000 U/min >rapid traverse 36/36/10 m/min >Subspindle >range L-W-H 3,9 x 1,65 x 2,0 mm >weight of the machine ca. 4,7 t >Main spindle chuck size: 210mm >Sub spindle chuck size 125mm >Automatic tool measuring- Q-setter >Chip conveyor >parts catcher with box >2 driven tools BMT 55 >set of standard tools CNC lathe with driven tools, Y-axis and sub spindle.

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Lrodpfx Ajuqkttjd Neg