Used Cnc Punching Machine for sale (65,024)

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Ledpfxsyagide Aiiern Further information: Including angle head Machine can be inspected under power.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Lrodpfex Hn D Rex Aiien Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Ledex Hn D Dopfx Aiisrn Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Lredpfx Aioxvw I Ijisn Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Ledpfx Aiexvw Izsiern Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Ljdpfxexxpbxo Aiiorn Type of control: CNC-Steuerung Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Lredpfx Aisxmd T Eeisn Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: Lsdjw Iu Nhopfx Aiisrn The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Lrodpfx Aoxc Tr Aeiien Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580 mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Lrjdpexmd Szefx Aiisn Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: Lrjdpfexmd Snex Aiien This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: used, Year of construction: 1997, machine/vehicle number: 11730, CNC control HEIDENHAIN, travel: X-axis 800 mm x Y-axis 600 mm x Z-axis 500 mm, swiveling range A-axis +20/-90 degrees, C-axis 360 degrees, max. spindle speed 18,000 rpm, automatic tool changer with 30 tool positions, rapid traverse 35 m/min, machine weight 7,000 kg, chip conveyor. Lredpfxoy Sqglo Aiien

Condition: used, Year of construction: 2005, machine/vehicle number: 564, RETROFIT of the machine in 2010, CNC control FANUC Series 18i TB, total weight 5,500 kg, filtration system W & W FILTERSYSTEME, chip conveyor SEREMETO, cooling unit EMAG HTD 720 Lrsdpfey Sqiaex Aiijn

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel mm: 730 Y axis travel mm: 510 Z axis travel mm: 510 B axis (degrees): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size mm: Ø500 Table load capacity kg: 300 Cutting feedrate mm/min (X, Y, Z): 50,000, 50,000, 40,000 Maximum rapid traverse m/min (X, Y, Z): 50, 50, 40 Spindle speed rpm: 12,000 Spindle power kW: 18.5 / 15 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine capacity: 61 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 125 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l: 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant Electronic handwheel integrated in CNC panel Coolant oil skimmer Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software Ljdpeydh Hlsfx Aiiorn MACHINE DIMENSIONS Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Condition: used, Year of construction: 2001, machine/vehicle number: 010614780, Serial No. 010614780, travel range X/Y/Z/B/C 680 x 400 x 625 mm +65 - -110 x 360 °, 2 pallet tables, workpiece clamping device, bridge, swiveling, 40-position pallet storage, workpiece setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, 240-position tool changer, coolant system, chip container, setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, chip tank, 240-position pallet changer, coolant system, chip container. Lrodpozgvnhefx Aiisn

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Ledpfxezgvlyo Aiiorn

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 Lrsdpfxoul S Eae Aiijn CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamping units Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 24626

Condition: used, Year of construction: 2003, Used machine Year of manufacture 2003 New HSD milling spindle 2023 not yet in use New drilling gearbox 2020 Technical specifications: X-axis working area 3400 mm Y-axis working area 1300 mm Lsdpfx Ajw I Ulcjiiorn Z-axis working area 130 mm Max. workpiece size 3000 x 1300 x 100 mm X-axis speed 25 m/min Y-axis speed 25 m/min Z-axis speed 20 m/min Milling spindle motor speed 0-24000 rpm Drill spindle motor speed 3400 rpm Milling spindle motor power 7 kW Drill spindle motor power Tool changer Interface 2.2 kW 5-way ISO-30 Brushless motor power X-axis 5.39 N/m Brushless motor power Y-axis 5.39 N/m Power Brushless motor Z-axis 2.39 N/m Number of drill spindles 15 Grooving saw diameter 120 mm Vacuum pump 100 m³/h Max. installed electrical power 15 kW Extraction hose connection diameter 120 mm Machine dimensions (L/W/H) 4500 x 2000 x 2500 mm Machine weight 2400 kg Location: Röllbach Availability: Upon request

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Lodpoygn Ibjfx Aiisrn Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° Ledpfx Asx Enpqoiiorn - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. Lrjdpfxsy Ih Rgo Aiion - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device with central lubrication with minimum quantity lubrication system Availability: short-term Lrsdpfxewka Ipe Aiijn Location: Röllbach

Condition: used, Year of construction: 2012, Used Machine Year of Manufacture: 2012 Base Machine - Dynestic 7521 20.6 Dynestic Table For classic nesting processing with wear plate Processing length 6250 mm (DYNESTIC 20.6 comes with additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the gantry, unit head, and consoles Gantry-type design Rack and pinion drive, helical-toothed, in X and Y directions, Ball screw spindle in Z direction for precise positioning Technical Data: The technical data refers to the DYNESTIC 7521 - 20.6 Please refer to the respective datasheets. Processing Dimensions: Max. workpiece size for trimming: X = 6250 mm Y = 2100 mm Max. travel distances: X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height on DYNESTIC table: Z = 1st level 318 mm / 2nd level 418 mm from table surface (without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and observation window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system Windows XP 80 GB hard disk / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD writer) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection required. Requirement: High-speed internet connection at the machine. DYNESTIC Table Fixed, continuous processing table with grid layout, continuous grooves in X and Y direction, distance between grooves 50 mm with 25 meters of sealing cord for fixing the wear plate 1 processing field with stop rails / stop Height 30 mm, pneumatically retractable 2 stop rails each in Y-direction and 1 stop in X-direction right side (from machine front edge perspective) Lrsdew I U Ecepfx Aiisn Vacuum Fields Single-circuit vacuum system Drilling Unit 7976, 24 spindles Motor power 3.0 kW 18 vertical spindles, individually selectable L-shaped arrangement: 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on board thickness) Spindle extension stroke: 70 mm Rotation: Alternating right/left n(max.) 1000 - 5710 rpm steplessly adjustable Mounting: M10 thread - 11 mm fitting Without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction (Distance 32 mm between 1st and 2nd horizontal spindle) 1 double drilling spindle in Y-direction Mounting: M10 thread, 11 mm fitting Max. total drill length 70 mm from mounting end Without tool, without holder Free slot 1 for: Optional double drilling spindle in X-direction or Vertical adapter with double pressing force Free slot 2 for: Optional saw in X-direction or Vertical adapter with double pressing force Milling Unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm, steplessly adjustable, two-stage feed stroke max. power at 12000 rpm to 24000 rpm Air-cooled with HSK-F 63 tool holder with right-hand rot...

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F Lrjdpfx Aowka H Eeiisn - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Lsdpfxeydf Ndj Aiiorn Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach