Used Cnc Punching And Nibbeln Machine for sale (68,820)

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm Lhjdpfek S Htxex Ad Njb - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. Lodpfxeya Iaqs Ad Nshb - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Lhjdpfoxn Tywsx Ad Njb Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 Ledpfx Adoya Dz Re Nohb x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10624 Manufacturer: HEDELIUS Type: RS 100 MAGNUM Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN 530i Lhsdpfx Aeya Dbksd Nsb Storage location: Halberstadt Country of origin: Germany X-Travel: 3500 mm Y-Travel: 1000 mm Z-Travel: 770 mm Main spindle drive power: 55 kW Table Load: 4000 kg Max. Tool Weight: 20 kg Max. Tool Length: 330 mm Max. Tool Diameter: 125 mm Tool Taper: SK 50 Tool Piece Magazine With: 50 Pcs./pcs. Turning Speeds: 6000 RPM Feed Speeds X/Y/Z Axis: 30000 mm / min

Condition: good (used), Year of construction: 2001, Ref. -No.: 10608 Manufacturer: KEHREN Type: RI 64 Year of construction: 2001 Type of control: CNC Control: Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany Table Diameter: 800 mm Grinding Diameter: 1250 mm Max. Table Load: 2000 kg Connection: 92 kVA Machine weight: 18000 kg Lhsdpfx Adeya A U Aj Neb Rated voltage: 3AC 400 V Rated frequency: 50 V Rated current: 157 A Performance assurance: NH-Sicherung 225 A Max. cabinet internal temperature: 55 °C Temperature change: max. 10 K innerhalb 1 Stunde Altitude max. above sea level: max. 1 K innerhalb Minuten m Further information: - Mold growth - Negligible risk inside the equipment - Impact of rodents and other pests - Temperature change max. 10 K within 1 hour - max. 1 K within 3 minutes - Supply line fuse - The machine control system complies with the applicable regulations DIN VDE 0660 Part 500 Edition 04.91 - Standards complied with EN 60 204-1 / EN 60 439-1

Condition: used, Year of construction: 1999, CNC Machining Center Manufacturer: Sigma Model: ZENIT 3-PALLET Year of manufacture: 1999 CNC control: Heidenhain TNC 426 Axis travel X/Y/Z: 1,000 x 500 x 550 mm Measuring system: Optical rotary encoder Machining capacity: Achievable performance in steel 60-70 kg/mm² Drilling: 50 mm Tapping: 36 mm Metal removal rate (milling) max.: 850 cm³/min Rapid traverse and working feed X/Y: 24,000 mm/min Rapid traverse and working feed Z axis: 15,000 mm/min Chain magazine with 2 directions Tool stations: 41 (Option 51) Tool selection: RANDOM Automatic tool changer: Double gripper change arm Tool holder: 40 DIN 69871-A Neighbouring tool Ø mm: 85 Alternately used tool Ø: 125 mm Max. tool length: 350 mm Max. tool weight: 6 kg Tool change time in sec.: approx. 3 Chip-to-chip time in sec.: approx. 5 Spindle speed: 40 to 12,000 rpm Max. power: 25 kW Gear stage selection: Electronic Coolant system Pallet changer unit Number of pallets: 2 Standard table area: 1,000 x 500 mm T-slots: 5x18 mm T-slot spacing: 100 mm Max. load capacity: 700 kg Pallet change time in sec.: approx. 25 Ledpfx Ajyazqvod Njhb Clamping system: hydraulic Dimensions (W x D) approx.: 4,154 x 4,400 mm Max. height approx.: 3,010 mm Height without Z-axis motor approx.: 2,660 mm Pallet/table height approx.: 1,075 mm Connected load: 32 kW Voltage: 400 V Coolant pump delivery rate: 100 l/min Coolant tank capacity: approx. 220 l Workplace lighting: Halogen 24V Machine weight approx.: 9.8 t 20126

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 Ljdpfxoyay H Ao Ad Nehb CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, incl. 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software at the CNC control 20126 Availability: May 2026

Condition: used, Year of construction: 1995, CNC Gantry Oxy-Fuel Cutting Machine Lhjdpfx Adeyay Dho Njb Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC Control: Global Control Plus Track gauge: 7,000 mm 8 x Oxy-fuel torches type ALFA 8 x Omnilift 200 Without rail track Without table Without filter 21126

Condition: ready for operation (used), incl. tool holder Lodpfxeyaxyhe Ad Nehb

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Lsdpfoyaqtasx Ad Nshb Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand. Lhedpfx Aox Awzbed Nob

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Lhsdpfx Adjx I Nr Eo Nob Toolholders will come without cutting tools.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 spindles in X- and 6 in Y-axis - Individually selectable - T-shaped arrangement - Max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating clockwise/counterclockwise rotation - n = 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swiveling - n = 5,300 rpm Ljdsx Enpqopfx Ad Nshb - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - 6 kW spindle, water-cooled - Milling unit 7982: - For lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), CNC machining center, horizontal moving column type, with automatic tool changer, linear digital scales on X, Y, and Z axes, and Siemens 850M computerized numerical control. Includes all standard machine equipment: Travel ranges: X = 1500 mm (60”) Y = 1500 mm (60”) Z = 810 mm (32”) Spindle speed range: 20 – 6000 RPM Operator station mounted on the platform with CRT display Portable pushbutton station for manual machine control Pushbutton for machine setup Safety door mounted on the platform, electrically interlocked Cartridge-type spindle with automatic power input and quick-change system Oblong matrix tool magazine for 90 tools, dual chain, carriage-mounted to ensure interference-free storage Tool chain guard with electrical interlock Tool change mechanism mounted on the carriage, transferring tools between the magazine and spindle Lhsdpfx Ajycxnkjd Neb Complete unit composed of a double arm and corresponding tool change mechanism, swinging the magazine chain to the spindle and vice versa, operated by hydraulic cylinder. Double arm. Rotation is powered by a hydraulic motor, and the feed/retraction movement is operated by a hydraulic cylinder.

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Ledpfx Adjycwq Ds Nshb

Condition: ready for operation (used), Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible. Lhodoycwq Rspfx Ad Nob

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Ljdpjycwrbjfx Ad Nshb

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Image is an example. Ljdpfxjycwtfs Ad Nshb

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 571120240869, Lightly used: Edda CNC carton cutting machine Lhjdpfx Adjxw R Uks Nsb Very neat machine, offered for sale due to a change in production. The machine can be seen in operation on site and is still in use. Site visits and demonstrations are possible! See the video for machine operation. Fully automatic, self-adjusting knives, equipped with 11 longitudinal knives and 1 cross-cutting knife. Ideal machine for custom packaging of parts to be shipped. Machine is equipped with TPA control system, very user-friendly. Feed module for fanfold carton is present. Price ex works Staphorst.

Condition: used, Year of construction: 2001, operating hours: 58,458 h, machine/vehicle number: 15035704944, Hour meter: - 58,458 hours - 38,450 hours Equipment: - 1 compact filter system (Interlit, SUK 200 - 900) - 1 linear control unit (Heidenhain TNC 430) - 1 2-axis NC rotary tilt table (700 x 500 mm) - 1 vertical tool changer with 32 stations (HSK 63) Note: - Machine is sold without tool holders, etc.!!!! Defects: - Hoses of the external coolant supply need to be replaced. - Interlock switch needs adjustment. Note: - Linear bearing for slide (Y-slide) - new in 2025 (approx. net €10,000) ATTENTION: - Additional item 219 = 1 hydraulic unit (for DMU 70) (in the container - outdoor area) - (starting price: €80.00) Note: Lhsdpsycvuhefx Ad Nsb The buyer is responsible for pumping out and disposing of the coolant (approx. 200 liters)!!!

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Lhedpfxeyagiko Ad Njb Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Lhodpfx Adeyagids Njb Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Lhjdpfxswym Nfj Ad Nob Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) Lhodpfxohmmfke Ad Njb - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition