Used Cnc Edm Machine for sale (64,208)

Condition: used, Year of construction: 1999, CNC Machining Center Manufacturer: Sigma Model: ZENIT 3-PALLET Year of manufacture: 1999 Lsdpfx Aeyazqvod Nohb CNC control: Heidenhain TNC 426 Axis travel X/Y/Z: 1,000 x 500 x 550 mm Measuring system: Optical rotary encoder Machining capacity: Achievable performance in steel 60-70 kg/mm² Drilling: 50 mm Tapping: 36 mm Metal removal rate (milling) max.: 850 cm³/min Rapid traverse and working feed X/Y: 24,000 mm/min Rapid traverse and working feed Z axis: 15,000 mm/min Chain magazine with 2 directions Tool stations: 41 (Option 51) Tool selection: RANDOM Automatic tool changer: Double gripper change arm Tool holder: 40 DIN 69871-A Neighbouring tool Ø mm: 85 Alternately used tool Ø: 125 mm Max. tool length: 350 mm Max. tool weight: 6 kg Tool change time in sec.: approx. 3 Chip-to-chip time in sec.: approx. 5 Spindle speed: 40 to 12,000 rpm Max. power: 25 kW Gear stage selection: Electronic Coolant system Pallet changer unit Number of pallets: 2 Standard table area: 1,000 x 500 mm T-slots: 5x18 mm T-slot spacing: 100 mm Max. load capacity: 700 kg Pallet change time in sec.: approx. 25 Clamping system: hydraulic Dimensions (W x D) approx.: 4,154 x 4,400 mm Max. height approx.: 3,010 mm Height without Z-axis motor approx.: 2,660 mm Pallet/table height approx.: 1,075 mm Connected load: 32 kW Voltage: 400 V Coolant pump delivery rate: 100 l/min Coolant tank capacity: approx. 220 l Workplace lighting: Halogen 24V Machine weight approx.: 9.8 t 20126

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Lsdpeyay H Asfx Ad Nehb Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, incl. 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software at the CNC control 20126 Availability: May 2026

Condition: used, Year of construction: 1995, CNC Gantry Oxy-Fuel Cutting Machine Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC Control: Global Control Plus Track gauge: 7,000 mm 8 x Oxy-fuel torches type ALFA 8 x Omnilift 200 Lodpeyay Dhsfx Ad Njhb Without rail track Without table Without filter 21126

Condition: ready for operation (used), incl. tool holder Lhodpjyaxyhjfx Ad Nob

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Ljdpfx Aoyaqtaed Njhb Spindle speed: 0-6000 rpm 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. X1020mm Y610mm Z610mm Lhodpfxox Awzbo Ad Njb 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Lhsdpox I Nr Eefx Ad Njb Toolholders will come without cutting tools.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 spindles in X- and 6 in Y-axis - Individually selectable - T-shaped arrangement - Max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating clockwise/counterclockwise rotation - n = 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatically swiveling - n = 5,300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - 6 kW spindle, water-cooled - Milling unit 7982: Ljdox Enpqspfx Ad Njhb - For lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), CNC machining center, horizontal moving column type, with automatic tool changer, linear digital scales on X, Y, and Z axes, and Siemens 850M computerized numerical control. Includes all standard machine equipment: Travel ranges: X = 1500 mm (60”) Y = 1500 mm (60”) Z = 810 mm (32”) Spindle speed range: 20 – 6000 RPM Operator station mounted on the platform with CRT display Portable pushbutton station for manual machine control Lodpfxsycxnke Ad Njhb Pushbutton for machine setup Safety door mounted on the platform, electrically interlocked Cartridge-type spindle with automatic power input and quick-change system Oblong matrix tool magazine for 90 tools, dual chain, carriage-mounted to ensure interference-free storage Tool chain guard with electrical interlock Tool change mechanism mounted on the carriage, transferring tools between the magazine and spindle Complete unit composed of a double arm and corresponding tool change mechanism, swinging the magazine chain to the spindle and vice versa, operated by hydraulic cylinder. Double arm. Rotation is powered by a hydraulic motor, and the feed/retraction movement is operated by a hydraulic cylinder.

Condition: ready for operation (used), A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible. Lsdpfsycwq Dex Ad Njhb

Condition: ready for operation (used), Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible. Lhedpoycwq Rjfx Ad Neb

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Ledpfxjycwrbo Ad Nehb

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Image is an example. Lodpfx Adsycwtfj Nshb

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 571120240869, Lightly used: Edda CNC carton cutting machine Very neat machine, offered for sale due to a change in production. The machine can be seen in operation on site and is still in use. Site visits and demonstrations are possible! See the video for machine operation. Fully automatic, self-adjusting knives, equipped with 11 longitudinal knives and 1 cross-cutting knife. Ideal machine for custom packaging of parts to be shipped. Lsdpfexw R Ukex Ad Nehb Machine is equipped with TPA control system, very user-friendly. Feed module for fanfold carton is present. Price ex works Staphorst.

Condition: used, Year of construction: 2001, operating hours: 58,458 h, machine/vehicle number: 15035704944, Hour meter: - 58,458 hours - 38,450 hours Equipment: - 1 compact filter system (Interlit, SUK 200 - 900) - 1 linear control unit (Heidenhain TNC 430) - 1 2-axis NC rotary tilt table (700 x 500 mm) - 1 vertical tool changer with 32 stations (HSK 63) Note: - Machine is sold without tool holders, etc.!!!! Defects: - Hoses of the external coolant supply need to be replaced. - Interlock switch needs adjustment. Note: - Linear bearing for slide (Y-slide) - new in 2025 (approx. net €10,000) ATTENTION: - Additional item 219 = 1 hydraulic unit (for DMU 70) Lhodpfxsycvuhs Ad Njb (in the container - outdoor area) - (starting price: €80.00) Note: The buyer is responsible for pumping out and disposing of the coolant (approx. 200 liters)!!!

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Lhsdpfx Aeyagiksd Njb Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Lhodpfxoyagidj Ad Nsb Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. Ledpfx Adewym Nfj Njhb A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) Lhedpfjhmmfkex Ad Neb - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 Lsdpjhik Ezofx Ad Nohb make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Lhjdpfexpqy Dsx Ad Neb Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Lhedpfx Adjw Iq Uge Nsb Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: refurbished (used), Year of construction: 2026, Manufacturer: TSCHUDIN Machine type: SL 105U Year of construction: 2024 Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Center width: 1000 mm Grinding length: 1000 mm Lhedpfxod Adfuj Ad Nob Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Lhedpfx Aoyabu Iod Nsb Control Unit: Mazatrol SmoothG Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: excellent (used), Year of construction: 2007, 1.) Work area: 500x552x300 mm 2.) Max. workpiece weight: 400 kg 3.) Milling spindle: 42,000 rpm 3.) Tool changer: 42 positions 4.) Guide system: Hydrostatic on all axes 5.) Drive: Linear motors 6.) Control: Röders RMS6 7.) Machine weight: approx. 10,000 kg Lhedeyaa Umopfx Ad Neb 8.) Required space: 3015x2510x2750 mm