Used Cnc Controller for sale (46,571)

Condition: excellent (used), CNC Heidenhain control I.D.number 229 135 99 S.No.133 8243 Bedpfxjm Dqkqs Abbslc Control was tested

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Blodst Ac Efopfx Abbjc Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, CNC control, numeric control, from GILDEMEISTER GDM 65/2A GILDEMEISTER type Eltropilot EP20 GD-2A year of manufacture 1989 Order: 150 299 Ser. No.: 0.854.183 Mains connection: 220 VAC 50 Hz Rack with 20 module places - 11 Built-in modules Dimension W x H x D 480x 260 x 220 mm Weight approx. 7 kg The control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock no: Bledjh Ecnaepfx Abbec 60343, 60346, 60347

Condition: used, Fanuc a16b-3200-0330 control unit PLC CNC Control Robot Board RJ3 Main CPU Condition: USED Item comes from a warehouse liquidation Bsdpfx Aju D Eaijbbelc 16b-3200-0330

Condition: like new (used), Year of construction: 1988, 4 axis CNC controled plano miller WALDRICH COBURG, distance between columns 3.100 mm, adjustable cross rail with 2.500 mm distance top of table to spindle nose, 3 pallets with clamping area 2.750 x 4.000 mm, autom. pallet changer, power 75 kW with base speed 76 rpm, max. torque at spindle 8.400 Nm, 5 - 2.000 revs, ram design 600 x 600 mm, 3 RAA 1 Extension automatic mounting, inner cooling System Bledpodu Hg Hsfx Abbsc Option: new electric and new CNC Control new measuring system

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Bsdpfxexircge Abbolc Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection • Detailed Operation Report Automatically Sent Bsdpfexircaox Abbolc OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis Bodpfx Absimwtrobelc - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - s/n 06 - CE rules (year 1998)

Condition: used, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture approx. 1980 Rack with 20 module slots – 12 modules installed Installed modules: 1 pc 0.651.406-19.3 UNI Universal Interface Bodpfx Aboflrtxobelc 1 pc 0.650.847-56.1 O32 Output Card 2 pcs 0.651.708-57.3 I32 Input Card 1 pc 0.652.138-36.1 APC 1 pc 0.651.928-25.3 LAB Axis Controller 1 pc 0.651.400-22.3 1 pc 0.860.204-59.1 B32 1 pc 0.652.128-35.0 RE4 1 pc 0.651.269-26.0 ITY Serial Interface 1 pc 0.651.974-23.2 ABS Termination Board 1 pc 0.651.298-18.3 CPU Central Processor Dimensions (W x H x D): 480 x 260 x 220 mm Weight: 7 kg Individual cards available on request.

Condition: used, CNC control in operator panel / machine operating terminal CNC path control FANUC Blsdpelb I D Tjfx Abboc Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions (WxHxD): 600 x 260 x 350 mm Weight: approx. 40 kg From a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal as a spare part donor.

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, CNC control for Wenzel Type WPC2000 including control cabinet and handheld unit Bodpsv Irygofx Abbslc

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine Blodpfxewmd Iro Abbec - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded Bodjfu Ivzjpfx Abbjlc

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, The CNC-controlled measuring machine is fully functional and comes with various measuring probes. Blsdpfx Abotq Ibnsboc

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm Bljdpowwt Trjfx Abbjc X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: used, Year of construction: 1991, CNC Machining Center weinig UNICONTROL 10 Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Blodpfedm Umlex Abboc Comments Longitudinal saw: 2800 rpm min., 3 kW, power take-off and slot spindle: 5 x 100 mm, 11 kW, 2.800 rpm. min., 1 spindle profiling: 6000 rpm. min., 11 kW, 2. Spindle profiling: 6000 rpm. min, 11 kW. "Angle windows, machining center WEINIG UNICONTROL 10 Number of spindle spindles: 1 Number of spindles molding: 2 Length of the spindle spindle mm: 300 Xrwk8iolx Length of profiled spindle mm: 295 Separate shaft grooves: yes Continuous stroke mm: 100 Spindle diameter mm: 50 Cutting tool cutting wheel mm: 232 Cutting wheel for perforation mm tool: 360 Length of material max mm: 2,600 Equipped for profiling: yes Automatic kontherholz: yes Glaucoma: Yes Workpiece rotation: Roller transport Main engine power kW: 11 Max feed rate m / min: 8 Control: Spindle ON / OFF only Working condition: dismantled / stored "

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Bodpfxow R Syis Abbelc

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 610 mm, turning length: 2,000 mm, spindle bore: 100 mm, travel distance X-axis: 310 mm, Equipment: documentation/manual, In good condition. Equipped with steadies. Spindle bore 100 mm. Machining diameter up to 610 mm, length up to 2000 mm. Siemens control. Features TurnPlus. Max. turning diameter: 546 mm Blsdpfjx Dhkvox Abboc Max. turning diameter over bed: 610 mm Distance between centers: 2000 mm CNC type: X-axis: 310 mm Z-axis: 2000 mm Spindle taper: Spindle bore: 106 mm Spindle speed: 1800 rpm Spindle motor power: 15 kW Tailstock: yes Bar feeder: no ----- Length x width x height: 4500.0 × 1620.0 × 1950.0 mm Weight: 4540 kg Technical condition: as is

Condition: excellent (used), For sale: Wysow 160 mm double vise, designed for milling machines and CNC centers. Robust cast iron and steel construction ensures high rigidity and stability during operation. Jaw width: 160 mm. Jaw opening: 50 mm. Weight: 29.6 kg. Hardened, serrated jaws. The two-part design allows for various configuration setups. Suitable for heavy-duty machining and work on both conventional and CNC milling machines. Good condition, fully functional and ready for work. Bedpew Sfp Tofx Abbolc

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Bodpfx Abevygwwebelc Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, 1 FPT SIRIO 8 milling machine from 1998 – CNC HEIDENHAIN TNC 430 X 8000 Z 2000 Y 1200 Rotary table 1500 x 1500 – travel 2000 Admissible weight 10 t Automatic head with 144 positions – speed 3000 rpm – 37 kW ATC with 60 positions – ISO 50 Chip conveyor Good working condition Bodpfxsx Nh Ubo Abbjlc

Condition: excellent (used), CNC INFOTEC Machining center Model: 3121 Bedjun Rqyopfx Abbelc 3-axis Year of production: 2016 Machine working area dimensions for axes X and Y: X: 2200 mm Y: 3100 mm Head stroke in the Z axis: 250 mm Machine working speed X, Y, Z: X: 60m/min Y:60m/min Z:12m/min Vacuum table Price of a new machine: approx. 75.000 € Price: 27.900 €

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump Bledsun Rqgspfx Abbsc HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 110 mm, For sale is a slightly used (2023) German-made CNC machine with an automatic tool changer (ATC) - CNC Step High-Z S-1400T. Working area 1400 x 800 x 110 mm (X/Y/Z). With a tool changer 1150 x 800 x 110 mm (X/Y/Z). Spindle Spinogy X22-L-SK20 with XControl E and XControl P. In addition, I provide all the equipment that allows you to work immediately: a Dell computer and monitor, software, a vacuum pump MARPA MV-0040N, a chip extractor, 7x tool holders, a stack of tools, and other equipment. I can provide training. The machine is located in Sigulda, Latvia. It is currently connected and can be tested. Bljdpfx Aeyfwakjbbec Additional information on request.

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: skyCNC 6008, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 8 m/min, workpiece length (max.): 6,000 mm, workpiece width (max.): 800 mm, workpiece diameter (max.): 270 mm, table width: 800 mm, table load: 400 kg, overall weight: 3,250 kg, spindle speed (min.): 15,000 rpm, X 900 Y 6100 Z 270 mm 11 kW (800 table) Available for immediate delivery! PFEIFER technology skyCNC Milling Machine 6008 – 11 kW / 5 ATC (As good as new, from 2021, only 400 operating hours) CNC Milling Machine – High-precision and powerful milling and drilling with extremely high speed and quality A 6-meter CNC milling machine with automatic tool changer, in mint condition, is offered for sale on behalf of a customer. The machine is available for immediate delivery and ready for operation at the customer's premises; the sale is due to the conversion to laser processing. The machine can be inspected with power at the customer's/seller's premises in 07819 Triptis. Key data: - Working/travel area (LxWxH): 6100 mm x 900 mm x 270 mm (clearance height under gantry 300 mm, max. tool length 300 mm) - Automatic 5-station tool changing system with ISO40 tool holder (optional 10 tool changing stations possible); includes 5x ISO40-ER32-75 tool holders and 5x ER32 collets - HPM minimum quantity lubrication/spray cooling for cooling the workpiece and tool, automatically controlled by a solenoid valve via M-code - T-slot table 6000 mm x 800 mm - Includes 3 HOMGE HBV-8-300 pneumatic quick-action vises; jaw width 200 mm, clamping force up to 8.0 t – continuously adjustable; high clamping accuracy; Patented pneumatic system - Central lubrication access points Bledpfx Abewlqpyeboc - Automatic tool length measurement - Mobile MPG control unit for quick and easy machine control, freely selectable workpiece zero points - Ethernet connection for data transfer via network, USB port - File formats: G-code, DIN ISO data - Incl. industrial computer system with 17" TFT touchscreen, PC keyboard, and mouse - HF milling spindle: HSD spindle ES951 A 1112 S / 11 kW, air-cooled; spindle speed: 3,000 - 15,000 rpm - Power supply: 3-phase AC 400 V / 50 Hz, power consumption: max. 15 kW - Dimensions (L x W x H): 6850 x 1440 x 2163 mm, weight: approx. 3250 kg - Compressed air connection: min. 7 bar, including air filter required Sale to commercial customers only! Support and service provided by PFEIFER technology and Innovation Plauen