Used Cnc Center Machining for sale (68,693)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Dsdjw Nklhopfx Aduewc Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: like new (used), Year of construction: 2015, functionality: fully functional, NAKAMURA STS-40 CNC Lathe Fanuc Series 16i-T CNC Control Tool Loader LOSMA System Supplied with a large range of tooling Year 2005, fully retrofitted in 2015 with all certificates Dodpfx Asxf D H Aoduewc Video available, machine always under power and can be seen in production

Condition: good (used), Year of construction: 2000, Year of manufacture: 2000 Max. spindle speed: 16,000 rpm Max. clamping weight: 1,500 kg Travel paths: X max.: 800 mm Y max.: 600 mm Dwedpfxoxcy E Ae Aduec Z max.: 600 mm Heidenhain TNC 430 control 30 tool magazine positions Blum laser (see photo) 30-position HSK 63 tool changer Weight: 7.5 t

Condition: ready for operation (used), Year of construction: 1998, A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible. Dodpfx Aexfvicsdujwc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC control: Mazatrol Matrix Nexus - Maximum turning length: 285 mm - Maximum turning diameter: 330 mm - Swing over bed: 550 mm Dwjdexft Ipspfx Aduec - Travels X/Z/W axes: 190/315/325 mm - Chuck size: 152 mm (6") - Maximum spindle speed: 5,000 rpm - Spindle motor power: 15 kW (20 hp) - Technical documentation

Condition: good (used), functionality: fully functional, controller model: CNC Mazatrol, number of slots in tool magazine: 24, Equipment: documentation/manual, MAZAK Yamazaki VTC 20 B Vertical CNC Machining Center Model VTC-20 B Used CNC Control MAZATROL M-32-B MAZATROL conversational programming EIA/ ISO programming function including interface for reader-punch unit MAZAK Monitoring System C AFC TBR TLM Adaptive feed control Tool breakage monitoring (only under Mazatrol) Dwodpfxew Rmu Is Aduec Workpiece service life monitoring and replacement tool call function Complete coolant system Flood coolant Coolant and chip protection Drum-type tool magazine for 24 tools Synchronous thread cutting 24-position tool magazine Tool length measurement device Monitoring System B M-function with feedback M-function Inspection under power is possible by appointment. All technical data subject to errors or misprints. Price upon request Sale exclusively within EU countries only.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Dsdpfjtrhq Hex Aduswc Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 350 mm, travel distance X-axis: 6,500 mm, rapid traverse Z-axis: 350 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 4,500 kg, working range: 6,500 mm, spindle motor power: 7 W, Headline Options: - Boost Your Production with the Refurbished NEXUS REV 8000 4-Axis CNC Machining Center! - Precision & Power: The Ultimate 4-Axis CNC Solution for Aluminum Doors & Windows - Maximize Efficiency: High-Speed, Double-Station CNC Machining Center Key Selling Points (Short & Punchy): - 4-Axis CNC Power: Machine complex profiles from the top and all angles (±90°) with incredible precision. - High-Speed Spindle: 7.5 kW spindle reaching 24,000 rpm for fast, clean cuts even on thick profiles. - Double-Station Design: Two independent 6.5-meter workstations for non-stop productivity—machine one profile while setting up the next. - Exceptional Accuracy: Advanced gantry system with dual servo motors ensures perfect alignment and vibration-free operation. - Smart Tool Management: 8-position automatic tool magazine handles tools from 1 mm up to 300 mm disc cutters. - Plug-and-Play Software: Included UNILINK CAD-CAM software streamlines operation from design (DXF) to finished part with automatic tool and clamp management. - Fully Refurbished & Guaranteed: Completely overhauled by NEXUS TECHNICA experts, backed by a 6-month warranty and full future support. Technical Highlights for the Ad: - Work Envelope (X, Y, Z): 6,500 mm x 350 mm x 350 mm (Double Station) - Spindle: 7.5 kW, 24,000 rpm Dwedpfx Adexfqg Neusc - Control: Advanced CNC with movable terminal (PC, keyboard, mouse included) - Tool Magazine: 8 positions (handles large disc cutters) - Clamping: 10 manually positioned pneumatic clamps (automatic positioning optional) - Software: UNILINK 3D CAD-CAM software - Condition: Professionally refurbished and modernized Ideal For: - Manufacturers of aluminum windows, doors, and sliding systems - Companies working with long aluminum profiles - Businesses aiming to automate and boost production capacity Call to Action: Ready to revolutionize your profile machining? Contact us today for more information and to arrange a viewing!

Condition: excellent (used), Year of construction: 2014, High-Performance Machining Center Spinner VC1200-HS / Siemens 840-SolutionLine Technology: In-line direct drive, spindle speed 12,000 rpm, power 28 kW, torque 178 Nm, tool holder SK40. Djdpfx Aexcwgwsdujwc Equipped with Siemens 840D Solutionline control system and 15" color screen, featuring a graphical user interface for shop floor programming (Siemens "ShopMill") and software version "Operate". Milling spindle up to 12,000 rpm with in-line direct drive. Travel distances: X-1200 mm, Y-730 mm, Z-650 mm; rapid traverse 48 m/min. Tool taper size 40 according to DIN 69871-A, drawbar bolt according to DIN 69872-A. General Features: - Air blast system for spindle taper - High-speed automatic tool changer with dual-arm changer for 32 tools - Linear guides on all three axes - Full enclosure with splash guard and work area lighting Technology: In-line direct drive, spindle speed 12,000 rpm, power 28 kW, torque 178 Nm, tool holder SK40 Tool magazine: 32 tool positions, dual-arm changer. Clamping surface 1,400 x 710 mm. Maximum table load 1,000 kg. Rapid traverse X/Y/Z 48 m/min. Chip management: scraper belt chip conveyor. Coolant supply: internal coolant supply (IKZ system) with filter, 22 bar, and additional 350-liter tank. Direct position measuring system in X/Y/Z (glass scales). Workpiece measurement with probe, BLUM TC52. Tool magazine: dual-arm tool changer for 32 tools. Pneumatics: compressed air connection at the spindle head. Control options: Siemens MyDynamics, 5-axis milling package.

Condition: good (used), Year of construction: 2006, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Dedpfx Adsxcpkzsuowc Spindle running time: 15,674 h (as of July 9, 2024) Machine available from: October 21, 2025

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: AL/5776, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,350 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 10, number of axes: 3, TECHNICAL DETAILS Travel Paths X-axis travel: 3,600 mm Y-axis travel: 1,350 mm Controlled axes: 3 Milling spindles: 2 Max. spindle speed: 24,000 rpm Main motor power: 6.6 kW Horizontal boring spindles: 6 Vertical boring spindles: 18 Tool changer positions: 10 Dedpjxcnx Dofx Aduowc MACHINE DETAILS Type of milling table: Beam table EQUIPMENT Boring tool Saw unit Vacuum pump

Condition: good (used), Year of construction: 2006, operating hours: 39,121 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, For sale is a machining center by Deckel Maho, model DMU 60 monoBlock. Dodpfsw I Emwox Adujwc The machine is in good condition and ready for immediate operation. Technical specifications: Year of manufacture: 2006 Control: 3D Heidenhain 5 Control on-time: 78,478 h Program run time: 39,293 h Operating hours: 39,121 h Travel X-axis: 630 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Worktable (length x width): 1000 mm x 600 mm Max. workpiece weight: up to 550 kg Max. spindle speed: 12,000 rpm Tool holder: SK 40 Tool magazine: 24 positions Space requirements: approx. 3.5 m x 3.5 m x 2.5 m Transport and loading can be organized Europe-wide for an additional charge upon request. Prices excl. VAT. Viewing possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or to get in touch, please visit our website.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm Dedpfx Adot Ac Efeujwc A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 500mm/300mm/350mm, table diameter: 950mm, max. workpiece weight: 2x180kg, spindle speed: 9000rpm, tool holder: SK40, tool positions: 36, tool diameter: 100mm, tool length: 220mm, feed: 10m/min, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/2700mm, weight: approx. 6000kg, control: Fanuc Series 18-M. Documentation available. An on-site inspection is possible. Dwedpfx Aoxfbc Usdusc

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Dodpfx Adouy Ihhouewc

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AA1/10754, travel distance X-axis: 3,170 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 3,170 mm, feed length Y-axis: 1,260 mm, feed length Z-axis: 300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 7 kVA, controller manufacturer: NUM, workpiece length (max.): 3,170 mm, workpiece width (max.): 1,260 mm, workpiece height (max.): 300 mm, total height: 2,550 mm, total length: 6,000 mm, total width: 3,000 mm, table width: 1,250 mm, table length: 3,170 mm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 10, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained, fully functional and in operation SCM RECORD 220, with 4th axis (vector axis). The tool magazine includes 2 slots for angle heads. Matrix table with 10 vacuum pods and sealing cord. Becker vacuum pump VTLF 250, 300 m³/h. In 2023, a new electrospindle (original SCM), inverter, and conversion to PC were installed. Drilling head with 16 spindles, including 6 horizontal heads, double. Enclosure / safety guards available. The machine can be inspected and tested at any time. Disassembly scheduled for end of October / beginning of November 2025. Loading and transport to be arranged by the customer. Dwodpfxow Hucgs Aduec

Condition: good (used), Year of construction: 2002, Machine is in good condition. Dedpfx Astwpamjduewc Parts shown by hand not come.

Year of construction: 2014, condition: used, Used machine Year of manufacture: 2014 Condition: well maintained Dwjdjw Nafwjpfx Aduoc Technical data: Processing length in X = 200 - 3200 mm Max. travel without re-clamping 1300 mm in Y = 70 - 920 mm Material thickness Z = 8 - 70 mm Equipment: Milling unit: 6.5 kW (S6-40), air-cooled with HSK-F 63 tool holder Drilling unit: 1.7 kW, 15 spindles Tool changer: 6-way magazine pick-up system, pneumatic 19" flat screen Campus software 1 machine license inc. Cabinet Control light ECO vacuum system, 1-circuit vacuum system 8m³/h Automatic central lubrication combined lubrication points for all linear guides in X, Y and Z directions Milling tools are not included Scope of delivery! Availability: short term Location: Röllbach

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, total height: 2,380 mm, total length: 1,450 mm, total width: 17,600 mm, table width: 480 mm, table length: 800 mm, overall weight: 3,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, A DMU brand and type 50 V milling center is for sale A new spindle was recently installed. The machine is in very good condition and fully operational, machining in the 100el range is possible without any problems Technical data: Brand GRUNDIG Model MillPlus Spindle speed range: 20 - 8000 Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Outer length of table: 800 mm Outer width of table: 480 mm Spindle holder: SK40 Dimensions L*W*H: 2450*1760+2380 mm Weight: 3500 kg On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Dwjdpfx Adsrdf Ebeujc PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Dwsdpfx Adjxdc T Sousc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Control: CNC-3 D path control system incl. Siemens 840 D Shop Mill TFT color display TECHNICAL DATA Travel Range: X-axis (longitudinal) 1035 mm Y-axis (transversal) 560 mm Z-axis (vertical) 510 mm Table working area 1200 x 560 mm Drive power (40/100% DC) 13/9 kW Speed range 20 – 10,000 rpm Tool holder (DIN 69871-1) SK 40 A Tool changer with double gripper Chain magazine Magazine positions 30 EQUIPMENT/ACCESSORIES - Chip and splash guard cabin with sliding door, electrically interlocked, and work area lighting - Automatic tool changer (double gripper/chain magazine) ATC 30 - Central lubrication - Spindle lubrication - Heat exchanger (work spindle) Dwedpswvqxcsfx Adujc - Coolant system with filtration unit, 600 l, 20 bar belt filter system - ICS: Internal coolant supply through the tool - Switch-over from coolant to compressed air blow - Rinsing gun - Rotating viewing window - Chip conveyor with coolant tank - Infrared probe TS 649 - Tool measurement system TT 140 - Electrical cabinet cooling - 4-color signal light - Installation elements - Documentation

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 900 mm, controller manufacturer: Syntec, table load: 1,500 kg, rotational speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 380 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, CNC Composite router Dwsdpfx Aev Tbggoduoc

Condition: ready for operation (used), A CNC 3-axis machining center is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/610mm, max. table load: 700kg, tool positions: 24, tool holder: SK40, spindle speed: 10000rpm, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2300mm/2400mm/2600mm, weight: approx. 4300kg, control: Ultimax 4. Includes coolant system, protective cabin, and a set of machine feet. Documentation available. An on-site inspection is possible. Dodpfsxc Nidox Aduowc

Year of construction: 2014, condition: good (used), functionality: fully functional, FOM INDUSTRIE DALI 70 For profiles up to 7m 6.5KW Electrospindle ISO30 10 tool magazine on head (some tools are included) 8 Vices with independent positioning Automatic lubrication of guide blocks and recirculating ball screw lead screws Pendular machining MQL Barcode Reader Dedexcywlspfx Aduowc Dimension 8600x2050 Weight 3900KG Can be loaded on truck

Condition: excellent (used), Year of construction: 2018, CNC 5-Axis Milling Machine X axis: 3,400 mm Y axis: 200 mm Z axis: 100 mm A axis C axis: +/- 180° Main motor: 7.5 kW Spindle speed: 24,000 rpm The EVOLUTION.JET is a highly flexible machining center, both in terms of customizable sizes and in the number of working tables, which can be equipped for manual, semi-automatic, or fully automatic loading and unloading operations. It is ideal for the simultaneous machining of all various components needed for chair or furniture assembly on a single machine. Technical Data Fully digital NC axes: 12 or more Interpolated linear axes: 3+3 or more Interpolated rotary axes: 2+2 Longitudinal X axis: 3,400 mm or more Transversal Y axis: 1,300 mm Transversal head Y axis: 1,000 mm Vertical Z axis: 750 mm A axis: Unlimited C axis: +/- 180° Optimally designed for consolidating the machining of different components required for chair and furniture assembly into a single workstation. Technical Specifications Fully digital NC axes: 12 or more Linear interpolated axes: 3+3 or more Rotary interpolated axes: 2+2 Longitudinal X axis: 3,400 mm or more Transversal Y axis: 1,300 mm Transversal head Y axis: 1,000 mm Vertical Z axis: 750 mm A axis: Unlimited C axis: +/- 180° Dedpopn T Itsfx Adujwc