Used Circular Saw for sale (5,918)

Condition: new, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,000 rpm, 3-axis CNC panel saw model TECNOMAC ENG T45 V380/50 "CE" NEW – AVAILABLE FOR IMMEDIATE DELIVERY ▸ Aluminium sliding table 3200x430 mm ▸ Sliding stroke: 3400 mm ▸ CNC-controlled lifting/tilting/parallel rip fence ▸ Parallel fence travel: 1300 mm ▸ Saw blade tilt range: 0-45° ▸ Max blade diameter with scorer installed: 400 mm ▸ Max blade diameter without scorer: 450 mm Bwodpfx Ajy N T N Rsfmop ▸ Rotation speed: 4500/6000 rpm ▸ Main motor power: 5.5 kW ▸ Scoring unit with independent 1.1 kW motor ▸ Scorer blade diameter: 120 mm ▸ Scorer speed: 8200 rpm ▸ Parallelogram-type extraction hood ▸ Machine start control on carriage ▸ Hold-down clamp on carriage ▸ Digital readout on extendable fence ▸ Pendant control panel with PLC touch-screen Machine available for viewing at our Gorizia facility (by appointment only).

Condition: good (used), Mitre and cross-cut saw for aluminium. Swivels left and right up to 45° and tilts up to 45°. Saw blade diameter up to 250 mm. Bodpfx Afoy N S Hzomjwp

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw ts 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, tilting capability 0° to 45°, 4 kW (5.4 HP) motor, 2,000 mm sliding table, lifting and transport device, foldable table extension, tenoning attachment, SUVA saw blade guard, GS wood dust tested with CE mark, as inspected at location Seevetal, without transport, subject to prior sale. Bwsdpfxoy N Sfqj Afmsp

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Bwsdpfsy N Rg Tjx Afmop Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm Bwsdpfx Afjy D I Nnemsp FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm Bsdpfxjy N D Nnj Afmowp saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) Bwedjy N D Nhspfx Afmsp - Transport dimensions 6.0m x 2.0m x 1.6m

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Bwedpey Nm Umofx Afmep

Year of construction: 2018, condition: used, Manual underfloor circular saw for saw blade up to Ø 250 mm Swivel range for miter cuts -45°/90°/+30° Working area (Round) 90° 80 mm (Round) 45° 80 mm Bsdsy Nm N Repfx Afmswp (Square) 90° 70 mm (Square) 45° 65 mm 220 V

Year of construction: 2004, condition: good (used), Underfloor saw Bwsdjy Nm Hijpfx Afmsp Manual operation For saw blade up to Ø 300 mm Mitre cutting left - right up to 45° Manual spray unit for emulsion Robust steel housing and support table made of grey cast iron 400V Mobile on base frame

Condition: good (used), Year of construction: 1994, machine/vehicle number: A 3883, Offer 24310 Technical Data: - Manual saw blade feed - Workpiece clamping in machine vice - Saw blade diameter: 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting capacity at 90°: round 110 mm Bwjdpsy Nlthofx Afmop - Rectangular 82 x 160 mm - Square 82 x 82 mm - In mitre at 45°: round 110 mm - Rectangular 80 x 120 mm - Square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Required space approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: Bsdpsy Nlnxsfx Afmewp - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm - Cutting capacity at 45°: - round: 110 mm - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable - Coolant system - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Condition: new, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm Bodpfxsy Dh Nne Afmewp capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Straight cut, range 105 x 105 mm, round = 120 mm Motor: 1.7 / 2.2 kW Saw blade size: 350 mm Saw blade speed: 1400 / 2800 rpm Pneumatic tensioning. Bedpfoy Iv E Sjx Afmewp

Year of construction: 2007, condition: excellent (used), functionality: fully functional, REMONNAY edging and resawing machine, type DR8/225, manufactured in 2007. 7-position variable adjustment, 2 x 110 kW motors each. Pre-trimming saws for side boards. Cutting height 225 mm. S-type singulation with infeed roller table. Includes tilting and aligning table. Chip separator with two deflectors. Board cross conveyor. Roller conveyor with stripping device. Electrical control cabinet with control panel. Bwedpfxsfcltgs Afmjp Includes all accessories (circular saws, etc.).

Condition: good (used), Year of construction: 1984, functionality: fully functional, From business closure: Ulmia 1710R Year of manufacture: 1984 380 Volt Mitre cuts up to 45° Max. cutting height: 50 mm Sliding table travel: 200 mm Table size: 800x500 mm Supplied with the accessories shown. Bwedoy Iutbspfx Afmop

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Bwjdpoxq N T Esfx Afmop Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: excellent (used), saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min total power requirement 3,4 kW Bjdpfey Aytvox Afmjwp weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: new, capacity Ø 30 - 160 mm Saw Body 30 Grad Linear Schlitten sawing motor 15 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Saw speed 30-120 rpm /min saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl weight of the machine ca. 5550 kg required space 3200 x 7600 mm Please use the contact form for price information. GERD WOLFF GLS-160 High-performance circular saw Bedpfx Afey Aplusmswp Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, saw blade diameter: 350 mm, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, cutting length (max.): 3,200 mm, intake manifold diameter: 120 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Saw blade diameter min.: 300 mm Saw blade diameter max.: 350 mm Saw blade bore diameter: 30 mm Dust extraction nozzle diameter: 120 mm Bedpfoy Ai U Aox Afmewp Max. spindle speed: 4,000 rpm (automatically adjustable) MACHINE DETAILS Voltage: 400 V Power consumption: 18.5 A Fuse: 25 A Transport packages: 2

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Bwodpjv R Dxaofx Afmsp Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, GRAULE AGT pull and table circular saw Bjdpfxexf Tr Us Afmswp

Year of construction: 1970, condition: used, Metal circular saw KKS 350 Blade diameter 350 mm Bodpfx Afehrzahjmjwp

Condition: good (used), Kaltenbach cold circular saw KKS Machine no. 6995 Saw blade diameter: 350 mm -Rotational speed: 130 m/min Bwedped Tp Nlefx Afmop -Total weight: 1200 kg

Condition: used, Transport 350 EUR Bwedpfjwna Rxox Afmsp