Used Circular Saw Sharpening Machine for sale (65,856)

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Bodpfx Adox Dl Dmorodd

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° Bdodpfx Aermkl Asdrod - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device Bdedpfouv Eygjx Adrjd - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° Bdjdpfx Adjx Sxx Ajred - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg Bdedpfod Aai Tox Adrjd

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Bedpfx Adewk Icbjrjdd Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Bdedowd N Daspfx Adred Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Automatic sharpening machine for gang saws with wet grinding. Grinding wheel diameter: 250 mm. Tooth pitch: 25 mm. Arc tooth profile. Fully automatic sharpening operation. Wet grinding unit with pump and tank. Includes several new spare parts. Ready for demonstration. Bsdpfx Aoyt I Hqodrodd

Condition: like new (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 150 mm, warranty duration: 6 months, Equipment: rotational speed infinitely variable, Kaltenbach KKS 450E – very neat used machine from 2018 with 6 months warranty. Extra options: * Micro-dosing system & wet cooling * Horizontal (hydraulic) clamping cylinder 1 x The KKS 450E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chrome steel, brass, copper, bronze, etc. Benefits at a glance: - Clamping, sawing, reversing and releasing – all with a single lever - Saw height adjustable via a lever - User-friendly mechanical controls mounted directly on the machine Bjdpfx Adeyr S Szsrjdd - Excellent accessibility for saw blade changes and maintenance - Workpiece clamping device on both sides of the saw blade - Two cutting speeds for virtually all applications - Ergonomically positioned controls for user comfort - Adjustable sawing stroke limitation and rapid saw blade return All pre-owned Kaltenbach machines are supplied with a 6-month warranty as standard. Transport and installation available throughout the Benelux.

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Bjdpfx Aowt A Ecodrsdd

Condition: ready for operation (used), Year of construction: 1998, Kölle sliding table saw KS340 Year of construction 1998 CE- KONFORM carriage length 3200 mm Cutting width 1050 mm tiltable up to 45° by means of handwheel Height adjustment of saw blade with handwheel Bdodpfx Aorhghasdrsd Cutting height 90° 110 mm Cutting height 45° 77 mm Speed 3000/4400 rpm Scoring unit Digital display: - Rip fence - Angle fence - Cross table Parallelogram table can be tilted 45° on both sides, digital display Suction connection D 120/80 mm Space requirement approx. 3300 mm x 1900 mm x 1600 mm Weight 740 kg

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Bodpewvbk Aofx Adrjdd Material width: 60 mm Material height: 70 mm *

Condition: new, Bernardo FKS 2000 Pro Table Saw / 400 V Technical Specifications Table dimensions 800 x 380 mm Formatting table 2000 x 270 mm Maximum rip fence length 2000 mm Maximum saw blade diameter 315 x 30 mm Maximum cutting height 90° / 45° 100 / 80 mm Cutting width with parallel fence 1200 mm Table height 870 mm Table extension 500 x 310 mm Table widening 800 x 880 mm Outrigger table with roller 700 x 580 mm Main saw blade speed 4000 rpm Scoring saw blade speed 5800 rpm Scoring saw blade 90 x 20 mm Dust extraction connection Ø 100 mm Motor output S1 100% 3.8 kW (5.1 hp) Motor input S6 40% 5.3 kW (7.2 hp) Voltage 400 V Machine dimensions (W x D x H) 2000 x 2900 x 1180 mm Weight approx. 280 kg Bedpfx Ajd N Tagedredd Scope of supply • Carbide-tipped saw blade 315 x 3.0 x 30 mm / Z 40 • Scoring saw blade 90 x 3.0 x 20 mm / Z 12 • Saw blade guard with dust extraction connection • Connecting hose with Y-piece • Miter fence with eccentric clamp • Miter fence • Rip fence • Table extension • Table widening • Parallel fence • Extendable telescopic fence • Fence flap with fine adjustment • Outrigger table • Push stick • Sliding handle • Operating tools Features • Extendable telescopic fence (up to 2260 mm) can be mounted at the front and rear of the outrigger table, adjustable from 90° to 45° • Important performance feature: saw blade diameter 315 mm can be used even with the scoring unit mounted • Large work table and standard table widening for cutting widths up to 1200 mm • Powerful drive motor for constant cutting speed, even at a cutting height of 100 mm • Miter fence and pressure pad can be moved along the entire length of the carriage • Aluminum parallel fence with micrometric fine adjustment • Stable saw unit guarantees vibration-free and precise work • Solid outrigger table with roller and telescopic arm for maximum stability • Anodized aluminum formatting sliding table available in 2 different lengths

Condition: new, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table dimensions 1100 x 735 mm Panel table 3200 x 400 mm Cutting length 3200 mm Max. saw blade diameter 400 x 30 mm Max. cutting height 90° / 45° 125 / 88 mm Cutting width with parallel guide 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Extension table with roller 1240 x 860 mm Main saw blade speed 3000 / 4000 / 5000 rpm Scoring saw blade speed 8000 rpm Scoring saw blade 120 x 20 mm Dust extraction connection Ø 100 mm Motor output S1 100% 5.5 kW (7.5 hp) Motor input S6 40% 7.5 kW (10.0 hp) Scoring motor output 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Scope of supply • Electric saw blade height adjustment • Digital cutting height display • Saw blade guard with infeed roller • Miter fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal fence flaps • Extension table with roller • Sliding block • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running twin-roller carriage with center and end position locking for precise cuts Bodpfx Ajd N S T Dedredd • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Extension table with roller for simplified handling of larger workpieces • Foldable parallel guide with micrometer fine adjustment (advantageous for large panels) • Standard equipment includes a separately driven scoring unit (motor output 0.75 kW) • Stable saw unit with pivot elements made of gray cast iron, guided on both sides • Table widening for cutting widths up to 1300 mm included in the scope of supply • All aluminum parts (panel table, fences, etc.) are anodized • Extendable telescopic fence (up to 3200 mm) can be mounted on the extension table at the front and rear, infinitely adjustable from 90° to 45°

Condition: used, Year of construction: 1989, functionality: fully functional, Used in good condition Bdjdpfsymlr Rsx Adrsd

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, Panel saw ALTENDORF F90, manufactured in 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Saw blade length: 2600 mm Cutting width: 1,300 mm Maximum cutting height: 130 mm Maximum saw blade diameter: 400 mm Main motor: 5.5 kW With scoring saw 4 speed settings Saw blade height adjustment: manual Weight approx.: 780 kg Technical data subject to change. Bdedpsipvrbofx Adrsd

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 with scorer 350mm Upper intake guard Altendorf Automatic motor brake Bdoder Eq Spopfx Adrod Weight approx. 1200 kg Technical data subject to change

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Equipment: scorer, Lazzari Juno 3200 Sliding Table Saw Manufacturer: Lazzari Italy S/N 0101072 Bjdpfxov Nzx Is Adrsdd Year of manufacture: 2001 Carriage length: 3200 mm Cutting width at the crosscut stop: 1350 mm Cutting width at the crosscut stop: 3200 mm Cutting depth: 125 mm Scoring groove Saw blade height adjustment with handwheel Saw blade tilt adjustment with handwheel Saw blade angle indicator with scale Saw blade diameter: 400 mm Speeds: 3200/4000/5000 rpm Motor power: 5.5 kW Motor brake Exhaust connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 620 kg

Condition: as good as new (ex-display), Year of construction: 2024, Slider length: 3200 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 200 mm Scoring saw: yes Saw blade height adjustment: motorized Saw blade tilt adjustment: motorized Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: digital Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 550 mm Speeds: 3000 / 4000 / 5000 rpm Bsdpfx Ajkuzd Hsdredd Motor power: 7.5 kW Motor brake: yes / automatic Dust extraction connection: 100 mm and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1000 kg

Condition: new, Year of construction: 2026, The JMY-870 sharpener is an excellent tool for sharpening circular saw blades. The sharpener is equipped with a durable, diamond grinding disc. This ensures precise and effective sharpening. The solid cast iron construction guarantees stability during work, and the adjustment of the angle of inclination and the angle of the saw provide full control over sharpening. Additionally, rubber pads under the feet minimize noise, ensuring comfort of work. Standardly equipped with a 125 mm diamond grinding wheel, it is suitable for sharpening saws from 80 mm to 700 mm in size. The most important advantages of this circular saw sharpener The sharpener is equipped with a high-quality 125 mm diamond grinding disc, which guarantees extraordinary precision when sharpening carbide saws. The cast iron base ensures stability during work. Thanks to this, the user can be sure that the device will not wobble or vibrate during sharpening. The sharpener is equipped with a tilting blade support, which allows you to adjust the angle of inclination from -35° to +45°. This allows you to precisely adjust the blade setting to the specific needs of the user. An additional function is the ability to set the saw's incisal angle in the range from +85° to -30°, which allows you to adapt the tool to different types of saws. The saw sharpener has been designed with work comfort in mind. Thanks to the rubber pads under the feet, the device works almost silently, which has a positive effect on the comfort of use. Application of the saw sharpener The sharpener is designed for sharpening circular saws. The operation of the device is intuitive and simple, which means that even people who are not familiar with the technique will be able to use this tool. The JMY-870 circular saw sharpener is a professional tool that ensures high quality saw blade processing and work comfort. Thanks to the various adjustment options, it is an excellent choice for people who require a precise and effective tool for sharpening various types of saw blades. THE SET INCLUDES A DIAMOND GRINDING WHEEL! Bdsdpsu Tti Ijfx Adrjd Technical parameters MIN/MAX SAW DIAMETER 80mm - 700mm HORIZONTAL SAW BLADE HOLDER TILTING -35° to +45° GRINDING SET TILTING -20° to +20° GRINDING DISC ROTATIONAL SPEED 2850 rpm DISC DIMENSIONS 125 x 10 x 13 mm MOTOR POWER 0.25 kW SUPPLY VOLTAGE 230 V NET WEIGHT 21 kg DEVICE DIMENSIONS 750 x 750 x 350 mm

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Bdsdpfx Aowp Ipxsdred

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start Bjdpfx Aerrw Ucsdredd - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: like new (used), Year of construction: 2023, For sale is a demonstration unit Hammer K3 Winner Comfort panel saw with a cutting length of 2000 mm. The machine is in mint condition. Technical data: - Sliding table: 2000 mm - Outrigger table: 1100 mm Bdjdpfxsvxrure Adrod - Mitre fence: 1300 mm - Angle indexer - Saw blade tiltable 90-45° - Max. cutting height: 104 mm with blade diameter 315 mm - Cutting width: 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2023 The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, sliding table saw Reference: R-A0117

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Bdjdpsyarq Tsfx Adrsd

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Bjdpfx Adsxl Dw Uorodd Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw