Used Circular Saw Grinding for sale (9,790)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. Ijdpfjz Im Huox Ahyobc See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: good (used), 5kW motor Ability to cut at an angle Ijdsqwdxujpfx Ahyobc Solid cast iron

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Ibedpfotwdviex Ahyec Length: 90 cm Weight: approx. 150 kg

Condition: new, Saw blade extending upwards, up to D 500mm Tilting of the saw unit to the right and left up to 20° Rapid positioning of the saw unit to pre-defined angular positions (135°, 90°, 45°) Positioning in intermediate angular positions via pneumatic locking Adjustable feed rate, feed controlled hydropneumatically Pneumatically operated integrated safety device with complete coverage of the sawing area Fog spray device Iodpfxsz R Daxe Ahyobc Workpiece clamping by a pair of pneumatically operated horizontal and vertical clamping cylinders Preparation for connecting a dust extraction system 3kW, 400V, 50Hz Possible options: Infeed roller conveyor Measuring device, manual or motorized Digital display Laser device for displaying the cutting line Minimum quantity lubrication system Dust extraction system

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. Isdpfozxxmkex Ahysbc This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Isdpezrywkjfx Ahysbc Technical data: - Pitch: ~ 650 mm - Cutting width: ~ 170 mm - Cutting height: ~ 40 mm

Year of construction: 2024, condition: ready for operation (used), An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026. Isdpfxeyyb Tls Ahysbc

Condition: used, Year of construction: 2010, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, An automatic saw with unloading chain conveyors Ibjdpfoy Tl Slex Ahysc

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Ibedpfsy N D Nhex Ahyoc Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: used, Year of construction: 2001, functionality: fully functional, CENTAURO SL 3000 longitudinal cutting saw Cutting length: 3400 mm Cutting width (max.): 600 mm Cutting height (max.): 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Isdpfx Aszmf Idjhyjbc Feed rate: up to 80 m/min Machine dimensions: 5285 x 1532 x 2150 cm (H) Weight: 1500 kg Year of manufacture: 2001

Condition: used, Format circular saw CMA2000 S315 2.5m, like new, standard equipment, 4 HP, 2500 mm cutting length, approx. 400 kg Iedpfx Aewzziiehyobc Price changes, errors, and typographical mistakes reserved.

Condition: used, Year of construction: 2024, Squaring machine with tilting blade Motorized blade lifting Manual blade inclination Technical data : anodized aluminum carriage mm. 3200/3800 main blade motor kW 5.5 scoring blade motor kW 1.1 max. blade diameter 350 mm blade tiltable at 45° max. cutting height with 90° blade 100 mm max. cutting height with blade at 45° 70 mm aluminum telescopic rod suspended "bridge" protection on the blade cutting width on the parallel guide mm.1500 dimensions of the fixed surface mm.1200x750 Ibsdpfx Ahotl D Enjysc

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Ibsdoyarq Tepfx Ahyoc

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm cutting width 1250 mm Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. Ibodpjz E Sv Nefx Ahyoc weight of the machine ca. 650 kg

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW Ibodpfx Ahsd Iinysyoc weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: good (used), functionality: fully functional, UDKP100 Multi-blade circular saw - 37kW motor power - max. cutting height: 100mm - max. cutting width: 300mm - max. working width: 450mm - diameter of circular saw blades: 250-300-350mm - working speed: 40m/min - chain-belt feed - manual blade height adjustment - extra thick steel frame, saw blade guide made of specially alloyed, hardened, and ground steel - manual blade height adjustment depending on the selected blade diameter - large set of spacers included Due to the age of the used machine, the warranty is excluded when sold to commercial customers. Ijdpfx Aexbrutjhyobc

Condition: used, Year of construction: 1989, saw blade diameter 400 mm capacity 90 degrees: round 120 mm turning speeds 1400 / 2800 U/min engine output 4,0 kW Ijdpfx Ahsy D A E Doyobc weight of the machine ca. 180 Kg dimensions 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw

Condition: used, Rema circular saw with carriage Main motor: 5.5 kW 3 cutting speeds Ibjdjz A Al Nspfx Ahysc Scoring saw: 0.75 kW Saw blade adjustable up/down and at an angle of 0-45 degrees Max. blade diameter: 400 mm Used machine, still in good working condition.

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), cutting height (max.): 105 mm, cutting width (max.): 2,100 mm, saw blade diameter: 350 mm, total length: 4,300 mm, The FIMAL CONCEPT 350 ELITE is the further development of the proven CONCEPT 350 PLUS, setting new standards in precision, safety, and efficiency. With a reinforced machine base, optimized extraction system, and a redesigned Multistop fence table, it offers even greater comfort and performance for joiners, furniture makers, and industrial panel processing. Thanks to its pressure beam with automatic feed, the ELITE combines the flexibility of a sliding table saw with the cutting quality of a pressure beam saw – all within a footprint of just 28 m². Technical Specifications ⦁ Aluminum machine and extension tables ⦁ Saw unit tiltable up to 46° ⦁ Pressure beam, including LED lighting with 3 different action colors: WHITE: Machine in stand-by Ibodjw Axf Rspfx Ahyjc RED: Pressure beam lowering or emergency-stop function BLUE: Saw unit in motion ⦁ Versatile support table 1,000 x 500 mm ⦁ Scoring system via the main saw blade (co-rotating) ⦁ Automatic workpiece length detection for minimal travel distance ⦁ Mobile and height-adjustable control panel, including: Saw blade holder, template holder, emergency-stop button, start button, selector switch for grooving/scoring/cutting, rotary switch for feed speed, switches for laser (option) and USB socket ⦁ Max. saw blade projection (350 mm blade): 100 mm at 90° / 70 mm at 45° ⦁ Saw blade: diameter 300 – 350 mm, bore 30 mm ⦁ Saw blade speed: 4,000 rpm ⦁ Motor: 5 kW (= 7.5 HP) ⦁ Feed speed: 0 – 40 m/min ⦁ Total length: approx. 4,250 mm ⦁ Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) ⦁ Required air pressure: 7 bar ⦁ Extraction port: 1 x 100 mm, 1 x 120 mm ⦁ Extension table length: 3,670 mm / 4,270 mm / 4,870 mm (total length) ⦁ Tilting range: 0 - 46° ⦁ Sliding table: 1,000 x 400 mm (extension table) ⦁ Crosscut fence: 3,200 mm with 2 digital flip stops ⦁ Speed: 4,000 rpm ⦁ Air requirement: 6 bar ⦁ Motor voltage: 400 V (50 Hz) ⦁ Feed speed: 0 - 40 m/min Options Multistop, cutting width 2,100 mm instead of 1,300 mm Programmable saw blade height adjustment Miter fence +/-50° Cutting line laser Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, power: 5.5 kW (7.48 HP), main motor 5.5 kW saw can be lowered up/down saw set at an angle of 45 degrees side carriage with aluminum guide table top 100×90 cm Maximum saw diameter 400 mm Ibodjqwg Dwjpfx Ahyoc Belt adjustable saw rotation 3000/4000/5500 rpm

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) Iedpfx Ahou Nif Tsyebc *

Condition: new, Year of construction: 2026, saw blade diameter: 400 mm, – 400 mm saw blade – Double miter cut – 4 pneumatic clamps – Mist lubrication system – Air blow gun – Protective cover Isdpfx Ahou Si Ndeyebc – Documentation – 400V

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Ibsdpfx Ahouqk Azsyec 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: used, functionality: fully functional, overall weight: 1,750 kg, Automatic band saw Ibodpfxoyc Saao Ahyjc Brand: SABI Model: EB 320 A Type: Automatic straight-cut Weight: 1750 kg Cutting capacity: 320 mm / 320x320 mm / round 320 mm Saw blade dimensions: 4570x32x1.1 mm Variable cutting speed: 16-100 m/min. Automatic feed length: 500-4500 mm UNITRONICS control system newly installed 2 years ago.

Condition: used, Metal and non-ferrous circular saw MÖSSNER MK/14 Speed: from 80 to 3000 RPM Table size: 900 x 700 mm Max saw blade diameter: Ø 315 mm Maxi cutting height: 85 mm Motor: 2 speed Ideal for sawing aluminum plates, bronze etc. Voltage: 380 V Length: 1100 mm Depth: 900 mm Ibjdpfx Ahjz I Dhvjyec Total height: 1300 mm Weight: approx 500 kg