Used Circular Saw Grinding for sale (10,452)

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar Bedpeu Niuzofx Acyeww total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: excellent (used), PERTICI UNIVER 50 SEMI-AUTOMATIC MITRE SAW This machine is primarily designed for cutting aluminium and PVC profiles. Both mechanical and electrical safety features of the guards have been given special attention. During upward cutting, the operator is protected by the top cover as well as by the machined profile. The cutting angle can be manually set from 0 to 67.5 degrees, both left and right, by rotating the turntable. Seven fixed stops (67.5 - 60 - 45 - 0 - 45 - 60 - 67.5) enable cutting without adjustment. Other positions are set using a graduated rule. Motor: 5.5 HP Three-phase supply Blade diameter: 500 mm Cutting capacity at 90°: diameter 178 mm or 160 x 160 mm Bodpexp Rx Tofx Acyjww 1 carbide blade, diameter 500 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Blade lubrication.

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit Bsdpfx Acsvwczyeysww - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: good (used), Multiblade saw SCM M3 Maximum cutting height: 100 mm Conveyor belt width: 300 mm Minimum cutting length: 390 mm Drive motor: 18.5 kW with laser unit Weight: approx. 1,800 kg Bsdpfoxrtq Dsx Acyoww Location: Austria, Ried im Innkreis

Condition: excellent (used), functionality: fully functional, CIRCULAR SAW with tilting blade model ORTZA SE 320 T second hand machine with scoring unit : Yes digital tilt angle reader 0° / 45° bridge saw blade guard volts.380/50 up / down and tiltable 45° of blades are manual digital tilt angle reader 0° / 45° carriage mm. 3200 indipendent motors main motor power Hp 7,5 scoring unit motor power Hp 1 max. diam. blade mm. 350 ( with scoring unit ) diam. of scoring unit mm.120 max. diam. blade mm. 350 ( without scoring unit ) Bwodpfexrma Sex Acyjw max. cutting hegiht at 45° mm. 92 max. cutting height at 90° mm. 120 max. cutting width at parallel guide mm.1250 bridge saw blade guard volt. 380/50

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Bwjdeuyyhajpfx Acyew Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Year of construction: 2007, condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Bodsu Nimqopfx Acyeww Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible Bsdpfetxlxuex Acyoww - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Bwjdpfexfr Nlox Acysw Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,500 h, We are selling a Paul KME2 1000 R edger. The machine has worked for 3 years in single-shift operation, shows signs of use, is mechanically sound, and has passed a technical inspection by the company. 1000 mm cutting width, 120 mm cutting height, control from the operator panel. Bwedpfx Acsv N Rv Asyjw

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: Bwsdpfovmtdkjx Acyjw 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Bedpfx Acowx R Ivoyoww

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel Bwsdpfxou Nilyo Acyew *

Condition: used, Year of construction: 2006, functionality: fully functional, cutting width (max.): 1,270 mm, power: 75 kW (101.97 HP), sliding table length: 3,800 mm, CIRCULAR SAW SCM MOD. SI450 N - Carriage mm. 3800 - Cutting width 1270 mm on parallel fence - Motor 7.5kw - Year 2006 (CE) Bwodemzbm Repfx Acysw

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Bwjdoxq N T Eopfx Acysw Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Bedpfx Acoxn Stceyoww Technical data: Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9

Condition: excellent (used), Circular saw Ø 100 to 550 mm, tooth pitch 10 - 40 mm, tooth height 5 to 25 mm, grinding motor 370 Watt/380 Volt, large machine stand for favourable working height, including 2 clamping cones for circular saws with bores from 15 to 85 mm Ø Bwedpslyqthefx Acyjw

Condition: good (used), branded types - circular saw, make Gema, type HGB Accessories: Vice Bwsdju T N T Aopfx Acyew

Condition: used, Technical details: saw blade diameter: 250 mm Bwsdju Nif Tjpfx Acyjw grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: used, Year of construction: 1999, functionality: fully functional, saw blade diameter: 400 mm, overall weight: 700 kg, table width: 1,100 mm, rotational speed (min.): 3,000 rpm, Table saw, table size 1020 x 1120 mm, maximum saw blade diameter - 400 mm, main motor power 5.5 kW, scorer motor power 0.75 kW. Bsdpfx Acoxqypksysww

Condition: used, Longitudinal circular saw Longitudinal cutting circular saw Crosscut / Longitudinal circular saw, year 1999 Works from below for lengths up to 4.7 m Material thickness up to 110 mm Also suitable as a traveling saw behind a production line INFO!! Bodpfoq E Ivtox Acyjww For such a new Flender flat circular saw motor 10 kW you pay 4,700 EUR that is, more than at Jöma for the entire machine

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm Bodpfx Acjxn Anweyeww capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75.0 mm rechts

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin Bodpfx Acjuiy Rqsyeww The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Year of construction: 2014, condition: good (used), The machine is from year of manufacture 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round - 75 mm Rectangle - 60 mm Saw blade dimension ø 285 x 2,0(T) x 1,7 (t) mm T = waste; t = thickness ; bore 32; 4x11 at 63 mm Blade speed inverter monitored 30- 150 rpm blade motor 7,5 kW Hydraulic system 1,5 kW Bodpfxsh Awzme Acyjww Coolant system Oil mist lubrication Blade feed system servo motor & ball screw material support 1.200 x 5.200 mm Bar feed system: servo motor and ball screw Automatic index single stroke 6 - 600 mm Multiple stroke up to 3.000 mm Automatic chip conveyor Chain conveyor Machine weight, incl. table 2.800 kg Length tolerance +/- 0,1 mm Cutting accuracy +/- 0,1 mm Remaining piece standard 75 mm Loading capacity 13 x ø 75 mm bars Max loading width. 1.000 mm Accessories: chip conveyor, air cleaning, loading magazine (still under power in production)

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive Bwedpfxoxpqzho Acyjw - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff