Used Chp for sale (632)

Condition: ready for operation (used), Brinkmann TC 25 / 810 + 001 submersible pump 10 L / min No. - 001, used, slight signs of wear, 100% functional, scope of delivery as per photos Chsdpfxei D Hl So Ab Tsf

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system Cedpfx Aol Dw U Djb Tjhf "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, Extraction table from Pötter with connected extraction by Ruwac (Ex protection) Csdpfx Abowy Rure Tehf

Condition: used, Power supply unit, converter, power supply, switching power supply, fire protection control -Manufacturer: Ströbich, protronic -Product: control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm Codpfx Aofmm A Isb Tehf -Weight: 0.1 kg

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,400 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, 110 cm high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Height of the side walls: 30 cm Cedpfx Aet Iv Absb Tshf Height of the tarpaulin: 110 cm Total height of the loading area: 140 cm Advantages of the Garden Trailer 230 KIPP car trailer If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Year of construction: 2024, condition: new, Manufacturer of Drumscreen. We can build all of drumscreens, All models available on the market. Many in stock ! Doppstadt - SM518 - SM618 - SM620 - SM720 - and other models Farwick Komptech Chodpfx Absthl T Ue Tjf - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Eggersmann Terra Select - T4 - T5 - T6 - T7 PRONAR - MPB 18.47 - MPB 20.55 - MPB 20.72 Any mesh size square 10x10 15x15 20x20 30x30 40x40 50x50 60x60 70x70 80x80... round diameter 10 20 30 40 50 60 70 80 mm... hexagon 10mm 20mm 30mm 40mm 50mm 60mm 70mm 80mm Drums made of special steel!

Condition: ready for operation (used), Grundfos SPK2-15 / 8X A-W-A-CVUV submersible pump SN:64812211001 with MG71A2-14FT85-B motor, used, normal signs of use, 100% functional, scope of delivery as per photos Codpfxelcf Nze Ab Tehf

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Chjdpfx Aeib Dadsb Tof Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Codewydkgopfx Ab Tehf

Condition: used, machine/vehicle number: 12469, Hydraulic press, two-column press, oil hydraulic press Cjdpeb I Dqaofx Ab Tehf -Press force ram: 65 to -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. Insertion height: 295 mm -Max. Width: 300 mm -Max. Stroke: 220 mm -with safety cage -Max. Feed speed: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, blue high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Cjdpfxot Iv Dls Ab Tjhf If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Year of construction: 2022, condition: new, Manufacturer of Drumscreen. We can build all of drumscreens, All models available on the market. Many in stock ! Doppstadt - SM518 - SM618 - SM620 - SM720 - and other models Farwick Komptech - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Eggersmann Chedsd Tgzdjpfx Ab Tjf Terra Select - T4 - T5 - T6 - T7 PRONAR - MPB 18.47 - MPB 20.55 - MPB 20.72

Condition: ready for operation (used), Brinkmann TC 260 / 460 MV + 210 submersible pump 250 L / min No. 003, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Chedpfxji D Hmwj Ab Tjf

Condition: new, mileage: 50 km, power: 162 kW (220.26 HP), overall weight: 11,900 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,500 mm, loading space length: 5,900 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Engine: MAN D0834 LFLAH 162 KW Automatic transmission MAN TipMatic 06.10 OD MAN Idle Speed Driving MAN TipMatic Efficiency MAN Easy Start Start MAN Tronic on-board computer MAN BrakeMatic MAN EBA emergency brake assistant Multifunction display Cruise control Codpfxsvm N Ulj Ab Tshf Lane keeping assistant Air conditioning Central locking EDC, ASR, ESP Emergency Brake Assist 2 ECAS Tank 180L AdBlue 35L Wheelbase 4200 mm Tachograph DSRC TollCollect preparation Lane Guard IV system RIO Box Connectivity System Bluetooth AUX/USB CB radio Radio MAN Media Truck with color display Air-suspended suspension seat Air suspension on the rear axle Daytime running lights Empty weight: 6475 KG Payload: 5425 KG Premium body: Box with Tail lift Side door lockable Tail lift 1500 KG dHollandia Internal dimensions in mm L/W/H 5900/2500/2700 14 pallet spaces Tool box 60L Roof spoiler Didn't find the right vehicle? Configure your own vehicle! Whether equipment, body or engine variant. Everything at a fair price! You can also buy just the bodies for your existing vehicle from us! Don't hesitate to contact us! * Pictures may show special equipment that is not included in the basic price. * ---- *The information provided on the Internet is non-binding descriptions. It does not represent guaranteed properties. The seller is not liable for tips and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Chodpfx Aswm Iz Aeb Tjf Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: used, 2 component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dosing gun, 2K mixing gun -Manufacturer: Plunger, double cartridge dispensing gun Mixpac Strap Kit -Number: 2x cartridge gun available -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg Chjdou Aigkopfx Ab Tsf

Condition: new, Product description: The EPS 80 Touch automatic length gauging system, which can be easily mounted on a new or existing machine tool. With this system, products of different materials and various lengths can be measured easily, quickly and accurately. EPS 80 Touch is a length gauging system which is widely used in the wood, plastic, aluminum and light steel industry. The system is very easy to operate and accepts entries in millimeters and/or tenths of a millimeter. It can be set up to the left or right of the machine tool. The system is available from 1 meter and is expandable to 14 meters. Specifications of the EPS 80 Touch: Speed : up to 40 meters/min. Holding force : 1800N Accuracy : +/- 0,25 mm Voltage : 230V, control current 24V Buttons : Start, Stop, reference, measuring tongue on/off, parameter button Displays : actual value, set value Emergency stop : this button immediately stops the EPS 80 Touch Display : touch screen with large displays and clear key layout Attachment : very easy to turn on and off for short stretches Software : fully proprietary, kept up-to-date in-house Components : industrial components and maintenance free Cables : cables including chain conveyor are supplied up to a maximum of 14 meters. Chedpfotd Tndjx Ab Tjf Our ads are compiled with the utmost care, type and specification errors reserved.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Codpfxev Ivn Ue Ab Tshf Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: ready for operation (used), Grundfoss MTR15-29 /7 A-W-I-HOOV submersible pump Model: A9+6574235P10510 SN:0001, used, normal signs of use, 100% functional, scope of delivery as per photos Cedpfxei D Ia Uo Ab Tjhf

Condition: used, Power supply unit, converter, power supply, switching power supply, fire protection control -Manufacturer: protronic, power supply charger -Input: 230 V AC -Output: 24 VDC -Rating: 96 W Chsdpfx Asfmm A Rsb Tjf -Dimensions: 105/195/H120 mm -Weight: 1 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Csdev Ivn Ijpfx Ab Tshf Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: ready for operation (used), Brinkmann TC 25 / 810 + 001 submersible pump 10 L / min No. - 002, used, slight signs of wear, 100% functional, scope of delivery as per photos Codpoi D Hmdofx Ab Tjhf

Condition: used, Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm Chjdpfxscgan Is Ab Tjf -Weight: 2.5 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Codpfxsv Ivnzo Ab Tjhf Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Electrician workbench ESD workplace Chedpfx Ajb A Hk Usb Tsf -Dimensions: 1500/750/780 mm -Conductive table top with Anka-Plast covering -for workplaces where electrostatically sensitive components and assemblies are processed. -Discharge resistance: according to DIN 51953