Used Chop Cutters for sale (3,026)

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 004-2024, total length: 2,250 mm, total width: 950 mm, total height: 1,900 mm, overall weight: 740 kg, power: 6.5 kW (8.84 HP), TECHNICAL DETAILS Distance between saw bands: 45 mm MACHINE DETAILS Operating voltage: 400 V Kedpfeyvzubjx Ahvjww Frequency: 50 / 60 Hz Power: 6.5 kW Operating current: 14.5 A Dimensions & Weight Dimensions (L x W x H): 2,250 x 950 x 1,900 mm Machine weight: 740 kg EQUIPMENT Fully made from corrosion-resistant AISI 304 stainless steel Two parallel saw bands Fully mechanized wheels Adjustable side band speed The machine comes from a business closure.

Condition: excellent (used), Year of construction: 1982, Make: OERLIKON Type of machine: FM3 Kedpoi If N Iefx Ahvjww Year of manufacture: 1982 Control system: HEIDENHAIN x-travel: 1300 mm Speed range: max. 1120 U/min Control: conventional Machine's weight: 6 t

Condition: new, Sind cutter 330 liters with vacuum Kodpfx Ajul Txushveww Type: SVC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 105 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Condition: new, Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel Kedpfx Aheul Tm Esvjww 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 200 mm, Kuris KV2002 UVV Straight Knife Cutting Machine for Textile Manual Cutting Manufacturer: KURIS - KRAUSS & REICHERT Condition: Used, very good, all wear parts replaced with new ones! We are an authorized KURIS service partner and specialist dealer. The electric straight knife cutting machine, KURIS KV-2002 model, offered here is in excellent technical condition and fully operational. A comprehensive inspection has been carried out by our specialist workshop. This machine is already equipped with UVV safety protection. The UVV protection meets the latest safety regulations required in Germany. All necessary wear and spare parts have been freshly replaced. The manual cutting machine can be inspected and tested on site. Cutting height: approx. 200 mm Weight: approx. 15 kg Current new price: EUR 6,687.99 (gross) Connection: 400V 50Hz CEE-16A Power: 790W Shipping within Germany possible – PICKUP PREFERRED! Packaging and freight costs are borne by the buyer. These costs will be clarified on request/purchase according to current rates. NOTE on warranty/liability: This item comes from a business liquidation. Items confirmed as coming from a business closure can be inspected and, within the scope of possibilities, tested for functionality on site. The following applies: purchased as seen/inspected – under exclusion of any warranty or guarantee claims. The buyer accepts these terms with purchase. COMMERCIAL SALE: You will receive a proper invoice with VAT shown upon purchase. Kedpfx Aeyvgghohvsww Subject to errors and prior sale.

Year of construction: 1979, condition: used, functionality: fully functional, Type: Die Cutter (Currently in production) Manufacturer: TMZ, Spain Model: D-4500 Year: 1979 Max sheet format 1300 x 900 mm Cardboard from 150 to 1500 gr. Corrugated cardboard max thickness 7 mm Kedpfx Ahjyvgc Aevsww Length 4500 x width 2500 x height 2500 mm Weight 16000 kg

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Kedpfx Ahoytnftjvjww Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Electronic saw height adjustment Automatic material feeding Touchscreen control panel Rotary worktable 0-345 degrees Maximum blade diameter 800 mm

Condition: excellent (used), Year of construction: 1991, 1 x tool grinding machine Spinner Kwedpfex Ai Nkjx Ahvow SM 100 Year of manufacture: 1991 with integrated coolant system Very nice machine from a medical technology company. Accessories: 12 x draw collets Schaublin W 20 / 349 E (1.5 / 3 / 3.5 / 4 / 5.5 / 6 / 7 / 8 / 8.5 / 10 / 11 / 12 mm round) 2 x carbide grinding wheels For an additional charge, we have a complete set of collets from 2 – 20 mm in 0.5 mm increments in stock. (partially new) The machine can be inspected under power.

Condition: ready for operation (used), functionality: fully functional, Specifications Manufacturer: Deckel Model: SOE Condition: Used Stock number: 00662 Kwodpfxeytfbxj Ahvsw

Condition: like new (used), functionality: fully functional, maximum cutting height 160 mm maximum cutting width 600 mm disc diameter 600 mm minimum disc diameter 590 mm Kedpfx Ajyu Shnshvoww disc rotational speed 2800 rpm motor power 9.2 kW year of manufacture 2006 CE marking

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system Kjdpfsxyihnjx Ahvjww - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: used, Year of construction: 2003, with motor movable cutting head on linear slideways, with pneumatic clamping system, adjustable cutting way, parallel height adjustment which is configurable via hand wheel, cooling lubrication with micro-fog spraying unit, cutting length: 130cm, connection: 400V, 50Hz, compressed air 6bar necessary, used, year of construction: 2003, only rareley used, very good condition. Kedpjyux Hdofx Ahvoww

Condition: used, functionality: fully functional, overall weight: 9 kg, Used finishing and roughing cutters 1 pc. finishing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 100 mm Height 50 mm Bore Ø 32 mm 1 pc. finishing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 90 mm Height 35 mm Bore Ø 27 mm 3 pcs. finishing cutters DIN 1880 HSS Cross and longitudinal keyway Ø 75 mm Height 35 mm Bore Ø 27 mm 1 pc. finishing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 50 mm Height 36 mm Bore Ø 22 mm 1 pc. roughing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 50 mm Height 50 mm Bore Ø 28 mm 1 pc. roughing cutter Kodpfx Asxv S D Djhvoww HSS Cross keyway Ø 100 mm Height 50 mm Bore Ø 32 mm 1 pc. roughing cutter DIN 1880 HSS Cross and longitudinal keyway Ø 90 mm Height 35 mm Bore Ø 27 mm 1 pc. roughing cutter HSS Cross keyway Ø 80 mm Height 45 mm Bore Ø 27 mm

Condition: good (used), Year of construction: 1987, functionality: fully functional, 1 x optical profile sanding machine Doebelie OP 125 X year of construction:1987 with dust extractor Esta KK 5 S in good condition. Kwjdpjqu Rh Nsfx Ahvjw The machine can be inspected under power.

Condition: excellent (used), Net price: €3,350 Kwjdpswf I Aqjfx Ahvjw Makita 5500s tenon cutter in near-new condition. You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price excludes VAT, ex-works Haldensleben.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Kedpfjww E Nrox Ahveww Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming Kwsdpsyrz Raefx Ahvew PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: used, functionality: fully functional, Meat Cutter TM PRESSTA, Type MK-10, Serial No. 0053/91, Poland. Net price: 1,500 Euro. Kwjdpfx Ahsyutw Dovow

Condition: like new (used), functionality: fully functional, Cutterhead Z4 in as-new condition Planer head Z4 1 pc for bottom Kodpfxoyur N Ej Ahveww 1 pc for top Originates from K133 and we can also shorten it by 300 mm for K103.

Condition: excellent (used), Year of construction: 1987, Max Cutting length : 2250 mm Automatic backstop, max depth : 800 mm Manual handwheel for accurate measurement 2 hand operated 2 x laser fence Green light indicator on cutting point 2 x extra cutting knives included Kodpfx Aoyurl Tohvjww Ask for WHATSAPP video presentation

Condition: like new (used), Manufacturer: Kennametal Kwsdpfxjyryd Es Ahvsw Diameter: 500 mm Number of teeth: 62 Available quantity: 2 pieces

Condition: excellent (used), Tool holder from the renowned brand WNT, precision-made, G2.5 balancing up to 25,000 rpm – designed for HSC/HPC machining. Clamping diameter Ø5 mm, length 80 mm. Includes a VHM (solid carbide) end mill. Very good condition. Kodpfew Rrutox Ahvsww

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Kwsdpfoxtiunsx Ahvjw Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Cross rung milling machine STEGHERR TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base € 1.030.00 Foot switch € 870.00 Adjustment optics € 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece € 630.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) € 180.00 HM saw blade, price € 160.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Kwsdpfx Ahsyrtzqevjw Setting the machine to the tools provided by the customer, price € 680.00 per individual tool Packaging in a crate (suitable for land transport) € 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) € 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 2008, total width: 2,400 mm, total length: 8,000 mm, total height: 2,500 mm, Empty weight: 8.000 kg Price: On request Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Oxy-fuel cutting, Offline software - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Kwjdpfsydivuox Ahvjw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum