Used Chicken Wood for sale (16,790)

Condition: used, Kahl - Wood Pellet cooler Fsdpfx Afov R Tdfjijpn 3-5 tons per hour

Condition: used, The company sells pellet production line and Spe Renergi low-temperature wood chip dryer/kiln PELLET PRODUCTION LINE CAPACITY 6 t/h | CPM, Fisker, Mogensen A fully assembled and working pellet production line with a capacity of up to 6 tons per hour is for sale. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. Fjdjwp Rqfepfx Afijpn The line includes: • CPM Championdry hammermill. • 2x CPM Pressess • Fisker (Essegi F1200) branded new fullautomation packaging line • Mogensen vibro sieves • Vecoplan / CPM wet wood chip milling station • Transporters / feeders Additional searparts are available – matricas, rolls, etc. Main advantages: • Large production capacity – up to 6 t/h. • High quality components from European manufacturers. • Line in working order – can be demonstrated in operation. • Available immediately. The equipment is located in Sweden and, upon prior agreement, it is possible to view and test it in person. Price: 400,000.00 EUR (VAT is not included) SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,250 h, functionality: fully functional, mileage: 1,250 km, power: 22 kW (29.91 HP), first registration: 09/2025, overall weight: 750 kg, fuel type: gasoline, operation weight: 750 kg, For sale: Saelen Premium 22 ER wood chipper. Fodpjxgblxjfx Afiepn 22 HP Briggs Vanguard twin-cylinder petrol engine, hydraulic feed. Recently serviced for sale. Trailer chassis weighs less than 750 kg. Maximum diameter: 13 cm, output: 8 m³/h. In very good condition. Asking price: €8,500 VAT included. Feel free to contact me for more information.

Condition: excellent (used), Catalog number 7411 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom Fedpot N Tt Tjfx Afiepn - lower shaft motor 1.5kW - toothed pulling shaft from the top - upper shaft motor 1.5kW - belt feeder - feed belt length 2250mm - feed belt width 400mm - main motor 30kW - auto reverse - overall dimensions length/width/height 4300x1630x1000mm - weight 1800kg – German production - auto reverse (possibility of adjustment) - used chipper, very good condition Net price: PLN 69,900 Net price: EUR 16,450 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2013, condition: new, wood baking oven with direct heating baking area 1,0 x 0,7 x 0,25 m (L x W xH) 8cm heatingstones Fedpsygm Uofx Afijpn also available with fully automatic pelletfiring system

Condition: excellent (used), Year of construction: 1990, Radial saw ZS135 Year of manufacture: 1990 On stand Fsdpjt Sin Ssfx Afiopn With pneumatic clamp Hydraulic feed brake Saw blade for aluminium 2 kW / 380 Volt

Condition: good (used), functionality: fully functional, power: 18.5 kW (25.15 HP), Weima ECO 600 E shredder, year of manufacture 10/2005 Electric motor: 18.5 kW Drive power via V-belt and gearbox Infeed opening: 600 mm x 800 mm Hopper volume: 0.6 m³ Fjdpfx Afjxf T Hreispn Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Tools: 14 knives Extraction port diameter: 160 mm Weight: approx. 1,300 kg

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) Fpedpfx Ajxc Rmqofisn (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Year of construction: 2020, condition: ready for operation (used), This Nestro NE 350P20 was manufactured in 2020. A robust used extraction system featuring a volume flow of 6927 m3/h and a main motor power of 11 kW. It operates under a negative pressure system with 2400 Pa, ensuring efficient dust and particle removal. Consider the opportunity to buy this Nestro NE 350P20 extraction system. Contact us for more information. Fpedexc Rbzepfx Afijn Application Types Other Woodworking Machinery

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL SPECIFICATIONS - Infeed width: 400 mm - Infeed height: 150 mm - Shaft width: 450 mm - Shaft diameter: 550 mm Fsdpfx Aem Nb Dvefijpn - Number of knives: 2 pcs - 3 toothed feed rollers each from above and below, 2×2.2 kW - Electric auto-reverse - Reversing mode - Belt feeder - Feeder length: 5,100 mm - Belt feed width: 400 mm - Main motor: 30 kW - Chipper dimensions (L/W/H): 2600x1500x1530 mm - Total feeder dimensions (L/W/H): 5200x560x910 mm - Weight: approx. 3,000 kg – with belt feeder – electric auto-reverse (adjustable) – reversing mode – Used chipper, in very good condition Net price: 68,900 PLN Net price: 16,200 EUR at an exchange rate of 4.25 EUR (Prices may change with significant rate fluctuations.)

Condition: excellent (used), For sale: Genini brand lathe in very good condition Fedpexf Nyusfx Afiopn

Condition: good (used), Year of construction: 1987, functionality: fully functional, Slow-speed machine with walking floor Rotor width: 420 mm Motor: 7.5 kW Fpodpoxf Ibwsfx Afien With hydraulic slider

Condition: excellent (used), CATALOGUE NUMBER 7613 Technical data: - inlet width 650mm - inlet height 300mm - shaft width 660mm - knife length 660mm - number of knives 2pcs - sieve dimensions 90x100mm - 2 toothed pulling shafts from the bottom - lower shaft motor 3kW - 2 toothed pulling shafts from the top - upper shaft motor 3kW - belt feeder Fedpfjwa Aqlox Afijpn - feed belt length 2700mm - feed belt width 630mm - main motor 75kW - auto reverse - reverse gear - overall dimensions length/width/height 5350x1300x1300mm - weight 4200kg ADVANTAGES – Italian production – auto reverse (possibility adjustment) - reverse gear - used chipper, very good condition Net price: PLN 149,900 Net price: EUR 35,270 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of shredded material 160mm - shaft width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - sieve dimensions 25mm - pulling pressure shaft at the entrance 0.75kW - toothed pulling shaft from the bottom 1.8kW - toothed pulling shaft from the top 1.8kW - vibrating chute length 4470mm - vibrating chute width 710mm - vibrating chute motor 2.2kW - main motor 55kW - auto reverse - diameter of the exhaust port 260mm - vibrating chute dimensions length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight approx. 5500kg - German production - very low mileage - original documentation Fjdpfx Aelrvg Usfispn - auto reverse (adjustable) - used chipper, very good/perfect condition Net price: PLN 159,900 Net price: EUR 37,620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5.5kW - 3 toothed pulling shafts from the top - upper shaft motor 5.5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2.2kW - main motor 90kW - reverse gear Fedpfx Asma Hv Dsfijpn - auto reverse - total machine dimensions L/W/H 4600x2350x1700mm - total dimensions of the feeder L/W/H 4550x980x970mm - total weight approx. 11000kg - German production, - auto reverse (adjustable) - used chipper, very good condition Net price: PLN 285900 Net price: EUR 67270 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7620 TECHNICAL DATA - shaft width 410mm Fpsdpjwbz Hujfx Afijn - top length 2220mm - cast iron tops - both tops adjustable - original cast iron guide - engine approx. 3kW - dimensions length/width/height 2220x800x1140mm - weight 504kg ADVANTAGES - German production - used planer - very good condition Net price: PLN 6900 Net price: EUR 1630 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), functionality: fully functional, Catalogue number 7442 TECHNICAL DATA - Infeed width: 410 mm - Infeed height: 120 mm - Shaft width: 430 mm - Shaft diameter: 400 mm - Number of knives: 2 pcs - Screen size: 60x60 mm - Top: driven, toothed shaft - Bottom: 2 driven, toothed shafts - Feeding belt length: 4100 mm - Feeding belt width: 400 mm - Autoreverse - Main motor: 30 kW - Feed motor: 2×1.5 kW - Machine dimensions (L/W/H): 2300x1550x1500 mm - Feeder dimensions (L/W/H): 4400x500x1000 mm - Weight: 2135 kg ADVANTAGES – Made in Poland Fpjdsufxlrspfx Afien – Autoreverse (adjustable) – With conveyor belt – DTR documentation – used shredder, in very good condition Net price: PLN 76,900 Net price: EUR 18,090 based on a 4.25 exchange rate (Prices may vary with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic blade extension - sawing units adjustable at 45° - manual spacing of sawing units - min. cutting length at 90° 300mm - max. cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90 degrees 90mm - pneumatic clamps 2pcs - control buttons - material support 3pcs - main engine 2×1.1kW - diameter of the exhaust port 2x90mm - dimensions L/W/H 5030x1150x1400mm - weight approx. 500kg ADVANTAGES – Italian production – tiltable sawing units - used saw, very good condition Fsdpfx Afowbz Uxeiopn Net price: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - max disc diameter 300 mm - spindle diameter 30 mm - blade covers 2 pcs - pneumatic cutting (disc movement up/down) - saw units adjustable at a 45° angle - manual spacing adjustment of saw units - min cutting length at 90° 220 mm - max cutting length at 90° 2820 mm - cutting width 110 mm - cutting height at 90° 90 mm Fsdpfx Asmv E Hxjfiepn - pneumatic clamps 2 pcs - control foot pedal - material support - main motor 2×1.6 kW - dimensions L/W/H 3620x1100x1250 mm - weight approx. 500 kg – unpainted – tilting saw units – used saw, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the EUR/PLN exchange rate 4.25 (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7616 TECHNICAL DATA - shaft width 510mm - 4-knife shaft - top length 2640mm - shaft cover - cast iron tops - both tops adjustable - original cast iron guide adjustable at an angle - 4kW engine - diameter of the exhaust port 160mm - dimensions length/width/height 2640x1000x980mm - weight 970kg ADVANTAGES Fpodpewbdn Usfx Afijn - German production - unpainted - long tops - used planer - very good condition Net price: PLN 9900 Net price: EUR 2320 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Catalogue number: 7536 – German production – no engine – used chipper TECHNICAL DATA inlet width 530mm number of knives 2pcs shaft diameter 580mm inlet width 420mm inlet height 200mm Fodpfxsvu A Rpe Afiepn Net price: PLN 30,000 Net price: EUR 7,060 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7032 TECHNICAL DATA - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - working width of the rotor 580mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 30x30mm - sieve 15mm x 20mm - pressure drawer - electric auto reverse - dimensions l/w/h 2000x1130x1530mm - weight 970kg ADVANTAGES - German production - auto reverse - pressure drawer - very good condition - used chipper Fjdsmgbt Iopfx Afiepn Net price: PLN 47,900 Net price: EUR 11,260 Net price converted at the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), Catalog number 7361 TECHNICAL DATA - inlet width 400mm Fedpfxotrwt Ne Afiopn - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor 1.8kW - 2 toothed pulling shafts from the top - upper shaft motor 1.8kW - belt feeder - feed belt length 2200mm - feed belt width 330mm - main motor 22kW - auto reverse - reverse gear - overall dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – German production - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 66,900 Net price: EUR 15,750 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7240 TECHNICAL DATA - Inlet width: 400 mm - Inlet height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 55x50 mm - 2 lower toothed feed rollers - Lower rollers motor: approx. 3 kW - Upper toothed feed roller - Upper roller motor: 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight: approx. 3500 kg – Made in Germany - Autoreverse (adjustable) – Used chipper, condition very good Net price: 85,900 PLN Net price: 20,190 EUR depending on the rate 4.25 PLN/EUR Fpodpfx Aerby Dljfijn (Prices may change with larger fluctuations)

Condition: excellent (used), Year of construction: 2001, CATALOG NUMBER 7089 Fjdpsndhbqjfx Afispn TECHNICAL SPECIFICATIONS - Feed hopper inlet: 1020x1230 mm - Rotor working width: 1020 mm - Rotor diameter: 348 mm - Main motor: 22 kW, 400V, 50Hz - Pump motor: 0.75 kW - Number of knives: 50 pcs - Knife size: 35x35x20 mm - Screen: 12 mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530 mm - Weight: 970 kg FEATURES – Auto-reverse – Comparable to WEIMA WL 10 – Manufactured in Germany – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 105,900 PLN Net price: 24,900 EUR (depending on 4.25 EUR exchange rate) (Prices may change with major fluctuations)