Used Checkweighers Metal Detectors for sale (35,296)

Condition: used, Manufacturer : Safeline Type : Continuous metal detector Guodpfex R Dgcsx Aa Eod Product inlet diameter : Ø 100 mm Product movement: vertical by gravity Application : solid bulk

Year of construction: 2018, condition: excellent (used), Detection head 350 x 200 mm Useful height 145 mm Gedpfstwq I Eex Aa Esud Intralox belt 1350 x 300 mm With ejection of defective products in closed container Year of construction 2018

Year of construction: 2025, condition: new, functionality: fully functional, Description This is a brand new Ceia THS21ET/3F, manufactured in 2025, it includes a standard manufacturers 12-month warranty. Gujdpfx Aaeum I Slj Eod It comes with Three frequency technology which means that the machine will automatically select a suitable frequency for the product. This means far more flexibility of types of products that this detector can run, compared to traditional metal detectors This machine will be ready to view at the end of September, and will be available immediately from that point to Buy or Rent. Technical Specification Aperture dimensions 550 wide x 350 high Belt stop & alarm reject system Modular belting Variable speed Currently runs right to left but can easily be changed to left to right. Protected reset system

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H Guodpfx Aehr R Iuea Esd • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 Guodpfjv T Ah Eox Aa Ejd 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: used, Year of construction: 2014, functionality: fully functional, overall weight: 300 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,500 mm, conveyor belt width: 300 mm, LOMA IQ3+ Metal Detector Conveyor Belt System Model 2014 Gujdpex Tivzefx Aa Ejd

Condition: good (used), Fortress Phantom Metal Detector Fully stainless steel Aperture 500mm wide x 225mm high Godsxtfw Sopfx Aa Ejud 1500mm long Belt Stop and alarm Video available on request

Condition: like new (used), The Safeline 50H metal detector has been developed to inspect all types of products: food, pharmaceuticals, plastics, chemicals, and many more. A metal detector can safely detect and reject metal contaminants from production lines to help manufacturers achieve compliance, minimize the risk of product recalls, and reduce production downtime. Godjx S Iz Hspfx Aa Ejud Checkweigher Features: A solution that allows all containers to be weighed and monitored as they pass through the conveyor line, both in terms of weight and product contamination. It is ideal for dynamic weighing of packaged products. - Brand: Mettler Toledo - Garvens - Model: S3 - Capacity: 1000 gr. - Voltage: 230 V

Condition: used, Ref: MM6192 Safeline Signature metal detector with pneumatic push-arm reject system into a lockable bin. Guedpfx Aox Emkyja Eod This unit is fitted with a full retail kit so meets all retail specifications. Model - Signature 30H. Serial number - 11410. Aperture dimensions - 360mm wide x 120mm high. Belt dimensions - 2000mm long x 300mm wide. Electric supply - 100-240 V / 50-60 hz / 1 phase.

Condition: excellent (used), Year of construction: 2020, Elektron Metal Detector Aperture 180mm Wide x 405mm High Belt length 1500mm Long Gujdpfx Aevw D Iuea Eed Stainless Steel Two run features options - alarm and stop or air reject blast Reject bin In excellent condition

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 560011801, Typ: Ishida DACS-G S015-35-WP1 Conveyor belt width: 310mm Conveyor belt length: 2.220mm Weighing belt length: 500mm Performance belt speed: 35-100m/min Guedpfxsv Df Sne Aa Ejd Description: Maximum load 1.500g; e=02 - 0,5g Year of manufacture: 2017 Conveyor belt: PU-belt Supply voltage: 230V / 50 Hz Manufacturer: ISHIDA Item number: 0033

Condition: like new (used), Year of construction: 2019, input voltage: 230 V, 2x mesutronic MN 5.2 CR 430 1x 2018 1x 2019 Guodpfxsvpgyke Aa Ejd 2 years mounted pipe passage Ø430 Installation height 440mm Tunnel metal detector easy to integrate into pipelines with a round device. IMPORTANT ASSETS - Detects ALL METALS - High sensitivity even in harsh industrial environments - User-friendly and reliable technology - Can be used for both quality control and machine protection

Condition: good (used), Safeline Metal Detector Stop and alarm Aperture 350mm x 140mm Version XT1.2 Serial number 09186 Gedpoucf U Ijfx Aa Eeud Length 1500mm In good working condition

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: CypCut, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 3000W, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 80 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning speed: 80 m/min, positioning accuracy: 0.02 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 2,700 kg, total length: 4,500 mm, total width: 2,200 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Fiber laser cutting machine 3000W 1500×3000 is a modern CNC device designed for precise metal cutting in industrial applications. Thanks to the use of an efficient Raycus laser source and the advanced CypCut control system, the machine ensures high accuracy, repeatability, and ease of operation. Its solid, welded and stress-relieved structure guarantees operational stability and resistance to deformation, resulting in long service life and reliability. The machine offers a large working area of 1500 × 3000 mm and high travel speeds of up to 80 m/min, enabling efficient processing of both individual parts and mass production. The WSX cutting head with automatic focus adjustment (autofocus) ensures optimal cutting parameters for different materials and thicknesses, significantly reducing the need for manual adjustments and increasing productivity. The device can handle a wide range of materials such as carbon steel, stainless steel, aluminum, brass, and copper, delivering clean edges and high-quality finishes. An additional advantage is the use of high-quality components such as INOVANCE servo drives, linear guides, and a reliable S&A water chiller, ensuring stable and continuous operation even in 24/7 mode. The machine is designed with user safety and comfort in mind, offering safety systems, easy access to controls, and the possibility of integration with additional systems such as fume extraction or automated loading. It is an efficient and cost-effective solution for companies seeking modern laser cutting technology. Gjdpfx Aajyw R Rnj Eeud Delivery to the customer is available. Delivery cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Year of construction: 2026, condition: new, functionality: fully functional, # Sheet Metal Beading Machine ETB 40 – Metal Technics Polska ## Professional Sheet Metal Beading Machine The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. ## Key Features * Maximum sheet thickness: 4 mm * Powerful 2.2 kW electric motor * Heavy-duty steel construction * 300 mm throat depth * Precise material guidance * Suitable for a wide variety of beading and flanging operations * Quick and easy roll replacement * Ideal for HVAC, tanks, enclosures, and steel fabrication * High manufacturing quality * Machine available from stock ## Technical Specifications * Model: ETB 40 * Maximum sheet thickness: 4 mm * Roller width: 165 mm * Throat depth: 300 mm * Roller speed: 15.3 rpm * Motor power: 2.2 kW * Dimensions (L × W × H): 1550 × 510 × 1180 mm * Weight: 341 kg ## Applications The ETB 40 is ideal for manufacturing: * HVAC ducts and fittings * Air-conditioning components * Cylinders and tanks * Machine enclosures * Decorative sheet metal components * Flanges, reinforcing beads and stiffening profiles * Components for the automotive and steel fabrication industries ## Heavy-Duty Construction The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. ## Easy Operation The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. ## Transport & Technical Support We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. ## Why Choose Metal Technics Polska? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions. Gusdozkubzepfx Aa Eed

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 4 mm, table height: 740 mm, input voltage: 400 V, type of input current: three-phase, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 4×2500 + LASER 4 × 2500 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 4 mm Maximum cutting length: 2500 mm Blade rake angle: 1° 30′ Number of strokes per minute: 20 Back gauge travel: 600 mm (standard) Distance between side frames: 2650 mm Blade length: 2550 mm Table height: 740 mm Motor power: 5.5 kW Weight: 3800 kg Machine dimensions (L × W × H): 3130 × 2030 × 1600 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line (laser guide) Delivery conditions: The machine is brand new 12-month warranty Warranty service Guedpfjyt E Aiox Aa Eod Post-warranty service CE declaration of conformity Operation and maintenance manual (English language) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Co., Ltd, controller model: FSCUT 2000C, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: RFL-C3000, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 3 mm, table length: 6,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 6,000 mm, working width: 1,500 mm, working height: 120 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 128 m/min, feed rate Y-axis: 128 m/min, feed rate Z-axis: 30 m/min, cutting speed: 120,000 mm/min, positioning speed: 128 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 4,500 kg, total length: 7,500 mm, total width: 2,500 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, CNC Fiber Laser Cutting Machine 6000 × 1500 mm 3000 W – Metal Technics Polska Professional Fiber Laser Cutting Machine The Metal Technics Polska F6000×1500 3000W CNC Fiber Laser Cutting Machine is designed for precision cutting of carbon steel, stainless steel, aluminum, brass, and copper sheets. Equipped with a Raycus 3000 W fiber laser source, WSX auto-focus cutting head, and BOCHU FSCUT 2000C CNC controller with CypCut software, the machine delivers excellent cutting quality, outstanding repeatability, and low operating costs. Its 6000 × 1500 mm working area allows efficient processing of large metal sheets, making it an ideal solution for manufacturers, fabrication workshops, and industrial production facilities. Key Features 6000 × 1500 mm working area Raycus 3000 W Fiber Laser Source WSX Auto-Focus Cutting Head BOCHU FSCUT 2000C Control System with CypCut Software Maximum positioning speed: 128 m/min Positioning accuracy: ±0.03 mm Repeatability: ±0.02 mm Schneider Electric servo drives Japanese THK linear guide rails S&A industrial water chiller Automatic centralized lubrication system Heavy-duty stress-relieved steel frame Designed for continuous 24/7 operation Machine available from stock Technical Specifications Model: F6000×1500 3000W Laser Type: Fiber Laser Laser Source: Raycus RFL-C3000 Laser Power: 3000 W Working Area: 6000 × 1500 mm Laser Wavelength: 1080 nm Cooling Method: Water Cooling Power Supply: 380 V / 50–60 Hz Machine Dimensions: 7500 × 2500 × 1950 mm Maximum Cutting Capacity Material Maximum Recommended Carbon Steel 22 mm 16–18 mm Stainless Steel 10 mm 8–10 mm Aluminum 8 mm 6–8 mm Brass 6 mm 4–6 mm Copper 3 mm 2–3 mm Maximum cutting thickness depends on the material grade, surface quality, and assist gas used. For continuous industrial production, we recommend operating within the suggested thickness range to achieve the highest cutting quality, maximum productivity, and excellent edge finish. Equipment The machine is equipped with a WSX Auto-Focus Cutting Head, Raycus Fiber Laser Source, BOCHU FSCUT 2000C CNC Controller with CypCut Software, THK linear guide rails, Schneider Electric servo drives, S&A industrial chiller, and an automatic lubrication system. Every machine includes installation, operator training, technical support, warranty service, and after-sales assistance provided by Metal Technics Polska specialists. Guedpfxszkq S Ne Aa Ejd Transport & Contact We organize machine transportation throughout Europe and to countries outside the European Union. Each transport quotation is prepared individually based on the delivery destination and machine configuration. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. If you would like to receive a quotation or learn more about this machine, please contact our sales department. Visit the Metal Technics Polska website to explore our complete range of CNC machines, watch demonstration videos, and discover our latest offers and promotions.

Condition: new, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bochu (FSCUT), controller model: FSCUT 2000 + Tube system, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus RFL-C6000 (6 kW), laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 120 m/min, workpiece weight (max.): 900 kg, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 8,500 kg, total length: 9,000 mm, total width: 4,500 mm, total height: 2,300 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, Description Fiber laser cutting machine FT62 with 6 kW power designed for cutting sheet metal as well as tubes and profiles. The machine is equipped with a 1500 × 3000 mm working table and a tube cutting module for tubes up to 6000 mm in length. Tube diameter range is Ø20–Ø220 mm and square profiles from 20 × 20 to 220 × 220 mm. The machine uses a Raycus 6 kW laser source, WSX cutting head and FSCUT CNC control system (Bochu). Thanks to Inovance servo drives, precision linear guides and rack drive, the machine ensures positioning accuracy of ±0.03 mm and repeatability of ±0.02 mm. Godpfx Asyvhm Rja Esud The machine features a full protective enclosure, exchange working table, smoke extraction system, Tongfei 6 kW water chiller and 80 kVA voltage stabilizer. Maximum positioning speed is 120,000 mm/min. Technical specification Parameter Value Model FT62 Laser power 6 kW Laser type Fiber laser Laser source Raycus Cutting head WSX Control system FSCUT (Bochu) Working area 1500 × 3000 mm Max tube length 6000 mm Tube diameter Ø20 – Ø220 mm Square profiles 20 × 20 – 220 × 220 mm X axis travel 3000 mm Y axis travel 1500 mm Positioning speed 120,000 mm/min Positioning accuracy ±0.03 mm Repeatability ±0.02 mm Cooling Tongfei 6 kW chiller Power supply 380 V / 50 Hz Construction full enclosure + exchange table Dust extraction smoke extraction system Voltage stabilizer 80 kVA Certification CE Optional equipment Option Price Industrial dust collector 7.5 kW approx. 39,000 PLN Tubest software (tube cutting) approx. 12,200 PLN Cypnest software (nesting) approx. 4,600 PLN Rotary unit left/right change approx. 1500 USD The machine can be configured according to the customer’s requirements. Laser power can be adjusted to individual needs: 3 kW, 6 kW, 12 kW.

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm Gsdom Hd Rzspfx Aa Eoud -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Gujdpfx Aoyv Ewmoa Ejd Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, OFFER OF THE WEEK! Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Delivery available. Transport cost quoted individually. Gsdpfeyr N E Esx Aa Eoud

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 27 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 115 rpm, bed width: 135 mm, overall weight: 160 kg, OFFER OF THE WEEK – 5% DISCOUNT! METAL TECHNICS POLSKA Professional CNC machines, laser systems and metalworking equipment We are a manufacturer and importer of high-quality metalworking machinery. We supply proven technologies from Poland, Europe and Asia used by hundreds of companies across Europe. For more than 12 years, we have focused on quality, precision and reliability. TYTAN 750 PREMIUM UNIVERSAL LATHE 0.75 kW / 230V WITH STEADY RESTS The TYTAN 750 universal lathe is a reliable and precise machine designed in a simple and practical way. It is perfectly suitable for home workshops, schools and industrial applications. The machine is equipped with a double prism bed for increased rigidity and machining precision. !!! LATHE STAND NOT INCLUDED !!! !!! MACHINE AVAILABLE FROM STOCK – READY FOR IMMEDIATE SHIPPING !!! TECHNICAL SPECIFICATIONS: • Turning length: 750 mm • Swing diameter: 265 mm • Bed width: 135 mm • Spindle taper: MT4 • Tailstock taper: MT2 • Chuck diameter: 125 mm Gedpfx Aajyuc T Ij Eoud • Spindle bore: 27 mm • Metric threads: 0.2–3.5 mm/rev • Inch threads: 8–56 T.P.I. • Spindle speed range: 115–1600 rpm • Motor power: 0.75 kW • Machine weight: 160 kg • Dimensions: 1510 × 570 × 580 mm Standard equipment: • Change gears • Chip guard • 4-way tool post • 3-jaw chuck 125 mm • Chuck guard • Chuck key • Set of jaws • 2 dead centers • Fixed and travelling steady rests (2 times heavier and significantly stronger than in comparable models) • Arbor for drill chuck • Drill chuck NEW FEATURE! Tailstock locking system with quick eccentric clamp. Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity • English operation manual included If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: documentation/manual, type plate available, OFFER OF THE WEEK – 5% DISCOUNT! HYDRAULIC GUILLOTINE SHEAR Guedpfxoyt E U Ej Aa Eed 8 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 8 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 12 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Blade length: 3300 mm Table height: 800 mm Motor power: 11 kW Weight: 7300 kg Machine dimensions (L × W × H): 3850 × 2345 × 1620 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport costs are calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: OWD/381/2020, feed length X-axis: 5,200 mm, I have an Optymalizerka OWD-1600 Metal-technika machine for sale. It is a very good machine manufactured by a Polish company. The arm movement is driven by a servo motor, enabling very fast and precise cutting. The machine control is based on a Mitsubishi controller (one of the best in the world for machine control solutions). Year of manufacture: 2022. The machine was used as a backup, operating on average for half a shift per day. The machine is connected and ready for testing. Interested parties are welcome to come and see it. I can record videos or send more photos. Price is net. KEY FEATURES SPECIFICATIONS Electronics: Controller with a color touchscreen display "MITSUBISHI" Functions: - Full optimization of 30 dimensions in two quality classes. Guodpfezhltvox Aa Ejd - Creation of cutting programs for different clients. - Cutting at a point marked with a fluorescent pencil. - Trimming the margin (beginning and end of the input material). - Cutting in batches (several elements at once). - Counters: meters, total, shift, operator, monthly. - Cutting accuracy: ±0.2 mm. - Ability to handle material up to 5.2 m in length. - Table with ejectors. Motor: 7.5 KW (saw Ø500 – 140 teeth) Input material width: 12 - 250 mm max. width/height (250 / 50 mm) Input material height: 20 - 120 mm max. height/width (140 / 120 mm) Input material length: up to 5,200 mm Lubrication: Oil-based central lubrication system Automation at the output: Connection for an inclined conveyor and sorting table.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Guedpszd Tllsfx Aa Ejd Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.