Used Charmilles for sale (61)

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Codpfx Abjv Rbxws Tork Only 15,100 hours of work. Machine fully serviced and working. Viewable at our Semsales premises in Switzerland.

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Crjdpfxetylpcj Ab Tek

Condition: used, Year of construction: 2004, Wire erosion / EDM Codpfjvyzgasx Ab Terk Travel distance X: 350 mm Travel distance Y :220 mm Travel distance Z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350mm / 220mm submerged

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cjdpfxjw Ucyue Ab Tsrk Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Filters and resin cartridges available Credpsha U I Dsfx Ab Tsk Please ask if you are interested !

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. Optionally floppy drives can be exchanged for USB drives. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Tested and fully functional. Can be viewed and tested in working order. Cjdpsw Ad Idjfx Ab Tork

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Cedpfxjxlhude Ab Tsrk

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Crsdotylpispfx Ab Tjk

Condition: used, Year of construction: 2003, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 300 mm table size X: 500 mm table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 530 mm max. workpiece size Z: 300 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 4 - time generator: 64 Ampere drop tank Crsdpfxsvyzf No Ab Tjk control Charmilles

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm Codjxbm Uzspfx Ab Terk 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: like new (used), Year of construction: 2017, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Cjdpfxei A I Hfj Ab Terk Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Credpfew Hxzmex Ab Tek

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Cjdpfx Abjv Im R Te Terk Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland.

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation with our customer until recently and is available immediately. Crsdjw Hxqnjpfx Ab Tsk

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Csdpjw S Tygsfx Ab Terk

Condition: good (used), Year of construction: 2000, Description table length 560 mm table width 400 mm amperage axis travel (X, Y, Z): 320, 220, 320 mm C axis 360° dielectric 290 l table load 300 kg voltage 400 V machine weight approx. 1950 kg approx. machine dimensions 1.65 x 1.60 x 2.45 m Net prices open to reasonable negotiation Dwebiexbm Ubja A Hkmeb 1. Bench drill 2. Jungner grinder 3. SPC 20 grinder Crsdpjxbm Uusfx Ab Tsk 4. Marking plate (table) 800x500 5. Maho 800 6. 2D dividing head Ø 300 7. 3D dividing head Ø 300 8. Tesa 700 height gauge 9. *Charmilles 200 sinker EDM 10. Charmilles Drill 11 sinker EDM 11. Metal band saw

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 300 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 6 / 6 / 15 [m/min] - Min./max. distance between table and chuck : 170 / 520 [mm] - Max. part dimensions : 820 x 580 x 250 [mm] - Max. part weight : 800 [kg] - Max. electrode weight : 50 [kg] Cjdpfx Abewl Rh Nj Tsrk - C axis : 0 - 100 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 9.1 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.700 x 2.750 [mm] - Machine height : 2.680 [mm] - Machine weight : 3.830 [kg] - Number of working hours : 13659 [h] EQUIPMENT - CNC : AGIEVISION 5 - Workpiece loading / unloading robot - Spindle nose : EROWA - Dielectric capacity : 600 [l]

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm Crodowzyr Aopfx Ab Tok V 220 mm Year 2008

Condition: used, Year of construction: 2012, x-axis 350 mm y-axis 250 mm Crodpfx Abowtr Dze Tek z-axis 256 mm U-axis +/-70 mm V-axis +/-70 mm dimension of workpiece 750 x 550 x 256 mm Working hours 29.559 h -edm hours 29559h

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Credpfx Asw Htdpeb Tsk Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Credpfx Absuqackj Tjk

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,370 h, functionality: fully functional, machine/vehicle number: 592.100.023, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, table width: 400 mm, table length: 600 mm, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-Y-Z travel paths: 350 x 250 x 300 mm X/Y axis speed: 6 m/min Z axis speed: 15 m/min Integrated C axis: ACURA-C Working area Working tank dimensions: 900 x 630 x 350 mm Dielectric unit content: 500 l Max. table dimensions: 600 x 400 mm Distance floor/table: 1,000 mm Min./Max. Distance between table and quill: 170 / 520 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Filling height: 0 - 290 mm Tool and electrode changer Electrode changer: 40 places Number of tools: 60 Generator type: ISPG Working current: max. 60 A Robot Easy ERE-009410 Base: Robot Easy UPC Max. transfer weight: 250 kg (for UPC pallets) Control: EROWA control and interface cable Control: Pneumatic chucks Gripper: RCS 5 Magazine plate: UPC with 4 positions (320 x 320 mm) Total weight: 1,500 kg Crsdovxrqtopfx Ab Tsk Cooling Control cabinet: Integrated air/water heat exchanger Dielectric: Integrated dielectric/water heat exchanger Control Operating system: Windows XP Data input: 15" LCD color screen, mouse or touchscreen Software: AGIEVISION 5 or DPControl MACHINE DETAILS System dimensions: 1,410 x 2,460 x 2,660 mm System dimensions including robot: 2,600 x 2,500 x 2,700 mm Net weight without dielectric: 3,830 kg Space requirement: 3,400 x 4,400 mm Fire extinguishing system: Automatic CO2 fire extinguishing system Form 2000 Switch-on time: 100,549 h EDM hours: 41,371 h EQUIPMENT - Automatic CO2 fire extinguishing system Form 2000 - Robot Easy ERE-009410 with EROWA control, gripper RCS 5, and magazine plate UPC - MTS Gripper Link Rapid - Integrated air/water heat exchanger and dielectric/water heat exchanger - Without magnetic table

Condition: defective spare-parts repository (used), Year of construction: 1995,  Machine with breakdown (unknown) proposed for spare parts. Crjdpfxowzifxs Ab Tsk

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 350 µ Year of manufacture: 2007 C-frame design Fixed table with lowerable tank Travel paths: X=350 mm, Y=250 mm, Z=350 mm Max. workpiece size: X=780 mm, Y=530 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table - chuck: 150 - 450 mm Working current 64 amperes Best achievable surface finish Ra 0.1 µm Integrated Accura C-axis Linear glass scales with 0.05 µm measuring resolution Incl. pneumatic chuck Erowa ITS 50 Incl. 32-position rotary electrode changer Cedswxwlzspfx Ab Tork Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2522 mm The machine has already been cleaned, serviced, and subsequently tested. We are happy to commission the machine for you as well.

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Crodpfx Abju Ilbue Tek