Used Chair Factory for sale (1,784)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 270 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 512 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyres type: polyurethane Front tyres condition: 100% Rear tyres type: polyurethane Rear tyres condition: 100% Battery volts: 26V Battery capacity: 150Ah Battery year: 2018 Pgodpfxjyv Sl Rj Ahvei Description: Factory-refurbished used unit from Toyota including new inspection and new approval according to FEM (formerly UVV). Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 95 h, load capacity: 1,200 kg, lifting height: 4,500 mm, free lift: 1,580 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,150 mm, empty load weight: 1,200 kg, total length: 770 mm, drive type: Elektro, construction width: 760 mm, High-lift stacker Load center: 600 mm Mast type: Triplex Technical condition: very good Front tyres type: Polyurethane Pgjdeyv Sl Dopfx Ahvoi Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Battery capacity: 225Ah Battery year: 2026 Description: Factory-refurbished used machine by Toyota, including new inspection and new approval according to FEM (formerly UVV). Pulse control, full free lift, CE certificate.

Condition: used, mileage: 159,999 km, power: 125 kW (169.95 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,250 mm, Year of construction: 2023, Equipment: air conditioning, central locking, navigation system, soot filter, A50 Front axle with increased load capacity AR2 Axle ratio i = 3.923 BA3 Active brake assist C6L Multifunction steering wheel CB7 Stabilisation level I CL1 Steering wheel adjustable in tilt and height CW2 Deletion of vehicle lowering D03 High roof D50 Continuous partition wall E1D Digital radio (DAB) E1E Digital extra: hard disk navigation E30 Battery main switch, single pole E3M MBUX multimedia system with 7-inch touchscreen E57 Electrical system for trailer socket ED4 Fleece battery 12 V 92 Ah ES0 Jump-start contact EW6 Digital extra: Remote Services Plus EX9 Digital extra: 3 years complimentary map updates EY2 Digital extra: Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management F68 Exterior mirrors heated and electrically adjustable FF5 Overhead shelf above windscreen FJ4 Storage compartment under cockpit FZ5 Anti-theft alarm system GD8 6-speed manual transmission ECO Gear H1B Tachograph operation front under headliner H21 Heat-insulating glass with band filter on windscreen HH9 Semi-automatic TEMPMATIC air conditioning HI1 Climate zone 1 (cold/comfort) IC1 Model series C907 / C910 Sprinter IE0 Model series C907 VS30 RWD IG4 Standard IG5 Basic IK0 Complete vehicle IL1 Domestic code IL5 Left-hand drive IR6 Wheelbase 4325 mm, rear overhang 1615 mm IT4 3.5 tonner J10 Speedometer km/h J4V Pre-installation Intelligent Tachograph EU J55 Seat belt warning device for co-driver J58 Seat belt warning device for driver J65 Outside temperature display JA8 Crosswind assist JG0 Shift point indicator JH3 Communication module (LTE) for digital services K13 Main tank 71 litres KP7 Emission control SCR generation 4 L65 Ceiling lamp(s) load/passenger compartment with door contact L94 Omission of parking lights LA2 Headlamp assistant LB1 Side marker lights LB5 3rd brake light LC4 Comfort roof control unit LE1 Adaptive brake light LX5 Europe M60 Alternator 14 V / 250 A M72 Vehicle HVO capable MJ8 ECO start/stop function MS1 Cruise control MT6 Emission class Euro 6d N1 Psdpfxjyh Sg Ij Ahvjgi MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm P21 Special price control I P23 Special price control III Q11 Longitudinal member reinforcement Q67 Rear tow hook RH2 Tyres 235/65 R 16 C RS3 Steel wheels 6.5 J x 16 S02 Driver's seat S22 Armrest for driver's seat S23 Co-driver bench seat SA5 Driver airbag SK2 Occupancy detection driver's seat T16 Sliding door right T77 Grab handle at load compartment sliding door at partition T86 Grab handle at rear right corner post V42 Lashing rails on side wall at belt rail V43 Wooden floor V94 Cable duct on side wall V95 Cable duct at rear portal VA2 Interior panelling load compartment up to roof height (wood) VF7 Upholstery fabric Maturin black FIN: W1V9076351P480990 W54 Rear doors, double-wing, opening up to side wall WM4 Factory control code 065 WZ7 Factory control code 155 X30 Registration certificate, part II X99 Manufacturer Mercedes-Benz AG XC9 COC papers XG7 Without uprating/de-rating 3,500 kg XI2 Year of modification G2-I XM1 Noise reduction measures XO5 Digital operating instructions XO9 Mercedes-Benz MobiloVan with DSB and GgD XU1 Signs / printed matter German XV0 Control code - BZM test XW9 Control code transition WLTP XZ0 Model generation 0 Y10 First-aid kit Y44 Warning triangle Z1N Approval N1 Z2E Country version EU - EFTA - UK Z4V Production Düsseldorf Z52 ECE version ZM0 Panel van Long

Condition: new, Year of construction: 2024, This CNC laser machine has a working area of 1600x1000 mm and is intended for use by a big factory for 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1610 LT will push your production to new heights. The Wattsan 1610 LT has a lowering depth of 160 mm. This model operates on wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1610 LT characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1505 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1600 x 810 mm Weight: 532 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE MACHINE FOR YOUR TASK Pgedpfxoh Ucwcj Ahvji On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2024, condition: new, Big CNC router machine for a big production. With it, you can produce doors, cabinets, tables, chairs, gaskets, LED signs, souvenirs, and 3D relief on wood. Great choice for those who seek no limits. This machine is used for cutting and engraving wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. Wattsan M1 2030’s planetary gears provide high speed, and the reinforced gantry and bed guarantee no vibrations during the work. Together, they provide precision. You can give our managers a call for additional details! Wattsan M1 2030 characteristics Working area: 2000x3000 mm Spindle: 6 kW Machine size: 2700x3540x1780 mm Weight: 860 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine. Pgedpfxeih Sdgs Ahvoi

Condition: new, Year of construction: 2024, This CNC laser machine has a working area of 1600x1000 mm and is intended for use by a big factory. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. This model operates on wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1610 ST characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1505 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1600 x 810 mm Weight: 442 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Pgsdpfx Ajry Ub Rshvoi Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Pedpfx Ahswcxb Ssvjgi Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: used, Year of construction: 1958, machine/vehicle number: 12S2013, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 380 V, input current: 9 A, grinding belt width: 150 mm, grinding belt length: 7,000 mm, grinding height: 400 mm, actuation type: electric, total height: 1,640 mm, total length: 3,800 mm, total width: 1,450 mm, Langzauner wide belt sanding machine Factory No.: 12S2013 Pgodpjyxf Tyefx Ahvei Year of manufacture: 1958 Power: 4 kW

Condition: used, empty load weight: 7,400 kg, maximum load weight: 27,400 kg, overall weight: 34,800 kg, axle configuration: 3 axles, first registration: 01/1989, loading space length: 12,800 mm, loading space width: 2,450 mm, loading space height: 2,450 mm, loading space volume: 77 m³, total length: 2,500 mm, total width: 3,750 mm, suspension: air, tire size: 14/80R 20, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, air-suspended, last axle positively steered, ABS (anti-lock braking system), roller shutter, aluminum side bumpers, supports Body: box semi-trailer with roll-up door, last axle positively steered via wedge, was used by the previous owner as a factory-internal semi-trailer (for trade fairs). The trailer is currently being rented out but can be viewed at any time! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Pgsdpfxsvhhfle Ahvei - .

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Psdpfjyxc Smjx Ahvsgi Serial number: 350114786/01 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, mileage: 15,921 km, power: 120 kW (163.15 HP), first registration: 08/2025, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2027, color: grey, gearing type: automatic, number of seats: 3, loading space length: 2,870 mm, loading space width: 1,650 mm, loading space height: 1,380 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Like-new condition, factory warranty valid until 08/2025. Special equipment: - Towing capacity 2,500 kg - Electrically folding exterior mirrors - Electric parking brake, hold function - Wooden floor in the cargo area - LED cargo area light - Metallic paintwork - Multibeam LED including High Beam Assist Plus - Park Package with reversing camera - Load securing rail system - Passenger seat bench (two-seater) in cab - Heated driver’s seat in cab - Smartphone integration (Apple CarPlay and Android Auto) - Body-coloured bumpers and attachments - Plywood lining in loading/cargo compartment Additional equipment: - 3-button remote control for central locking - Third brake light - Adaptive brake light - Passenger airbag - Driver airbag - Hill start assist - Electrically adjustable and heated exterior mirrors (both sides) - Exterior mirrors with blind spot assist - Outside temperature display - BlueEfficiency package - DAB tuner (digital radio) - Rev counter - Automatic headlight activation - Driver assistance systems: Active Brake Assist, Lane Keeping Assist, Attention Assist (drowsiness detection), Intelligent Speed Assist, Breakdown Management, Crosswind Assist - 250 A alternator - Speed limiter system 210 km/h - GTronic automatic transmission (9-speed) - Front cup holders - Lockable glove compartment - Tailgate - Body type: Standard panel van - Instrument cluster with colour display - Comfort closing system - Communication module (LTE) for digital services - Fuel tank: 70 litres - Full partition wall in the loading compartment - Manually adjustable steering column Pjdpfx Ahsyxctqsvsgi - Multifunction steering wheel - Headlamp range adjustment - Truck registration - Mercedes-Benz emergency call system - Model refinement (2) with code - Engine: 2.0 L – 120 kW CDI CAT - MBUX multimedia system (10.25" touchscreen) - Pro version - Wheelbase 3,200 mm - Full wheel covers - Tyre pressure monitoring system - Reversing camera - Low-emission according to Euro 6e emissions standard - Sliding door right (load/passenger compartment) - Electromechanical power steering - Seatbelt warning system (driver and passenger) - Seat upholstery: Caluma fabric - Comfort driver’s seat in cab - Driver’s seat with lumbar support - Driver’s seat with seat depth adjustment - Steel wheels 6.5x17 - Engine start/stop system - 12V socket in cab - Fleece battery 92 Ah - Navigation system pre-installation (for MBUX multimedia system) - Service interval display (Assyst) - Heat-insulating glazing - Permissible gross vehicle weight 2.80 t - 2-way speakers in front

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass Pedpfoq Igyvjx Ahvegi 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun Podpfxeyvvluo Ahvogi - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, functionality: fully functional, mileage: 374,903 km, power: 331 kW (450.03 HP), first registration: 02/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Pjdpfx Aheyvp Ucjvogi Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, Year of construction: 1994, machine/vehicle number: LC613, Used tetra pak TBA 8 line 1L slim Technical Specifications & Performance DataThis second hand complete bottling line is engineered for industrial packaging of aseptic carton containers, centered on the renowned Tetra Brik Aseptic platform. Designed for beverage production environments that demand hygiene and reliability, it provides end-to-end handling from aseptic filling through cap application to final case packing. As a used bottling line, it offers a cost-effective route to expand capacity while maintaining quality standards.Main filler: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMConstruction year (main filler): 1994Package format: 1.0L Slim cartonAuxiliary equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line application: Aseptic carton filling with downstream capping and case packingCompliance: CE markedAdvanced Automation & Control SystemsThe line leverages factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and operator-friendly control. Safety interlocks and guarded access points support secure operation during beverage production. Standardized control architecture streamlines start-up, shutdown, and recipe management for the 1.0L Slim carton format.Centralized operator interface for coordinated filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency-stop devices for protected operationDesigned to support quick diagnostics and routine maintenance tasksProduction Line Integration CapabilitiesThis used bottling line integrates aseptic filling with cap application and case packing to create a cohesive industrial packaging solution. It is suitable for beverage production environments requiring carton handling and end-of-line packing. The cap applicator 21 and cardboard packer 70 are configured to work inline with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring stable throughput.Inline configuration from filler to cap applicator to case packerOptimized for 1.0L Slim carton containersCompatible with standard conveyor and accumulation layoutsDesigned for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a second hand, complete bottling line in working condition and ready for operation. It presents an efficient option for facilities seeking a pre-owned aseptic carton solution without the lead times typical of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operational status: Ready for operationCommercial status: Used/second hand industrial packaging lineOperational Performance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filler for carton containers, engineered for stable, hygienic beverage production. Downstream, the cap applicator 21 ensures accurate closure application, while the cardboard packer 70 provides robust case packing to supp... Pgjdpeyvpt Eefx Ahvoi

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02022512, total length: 8,200 mm, total width: 1,200 mm, total height: 2,300 mm, overall weight: 3,400 kg, type of input current: three-phase, input voltage: 380 V, working height: 900 mm, power: 30 kW (40.79 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 10 Machine type: Glass straight line edging machine Year: 2002 Power: 30.5 kW Voltage: 380 V Frequency: 50 Hz Weight: 3400 kg Pjdpfx Asyw Ucbshvsgi Machine configuration: Straight line glass edging and polishing Origin: Italy Applications Suitable for: • Flat glass processing • Mirror manufacturing • Furniture glass production • Architectural glass fabrication • Interior glass elements • Glass workshops and factories

Condition: used, mileage: 114,465 km, power: 75 kW (101.97 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,050 kg, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, XZ1 Model Generation 1, V85 Smoker Package, W65 Tailgate, E07 Hill Start Assist, LA2 Headlight Assist, EZ8 Parktronic, MJ8 ECO Start-Stop Function, CL4 Multifunction Steering Wheel with Trip Computer, JK3 Instrument Cluster (Pixel-Matrix Display), MS1 Cruise Control, JF1 Rain Sensor, F68 Heated and Electrically Adjustable Exterior Mirrors, V30 Side Cargo Area Lining, L16 Halogen Fog Lights, MX0 BlueEFFICIENCY Package, EN6 Audio 10, SA6 Passenger Airbag, E1D Digital Radio (DAB), S04 Height-Adjustable Passenger Seat, SB1 Comfort Driver’s Seat, SE5 Driver's Seat Lumbar Support, VV9 Roof Frame Mounting Points, D50 Full Partition, IL5 Left-Hand Drive, RG1 Tires 205/65 R16, RH6 Tire Brand Hankook, RR6 Spare Wheel with Jack, RS3 Steel Wheels 6.5 J x 16, F66 Lockable Glove Compartment, H20 All-Around Heat Insulating Glass, LE1 Adaptive Brake Light, BA3 Active Brake Assist, JW8 Attention Assist, C70 Pedestrian Protection, EY5 Mercedes-Benz Emergency Call System, EL8 2-Way Front Speakers, GC9 6-Speed Manual Transmission FSG 350, KP6 SCR Exhaust Aftertreatment Generation 3, CF0 Basic Chassis, IB6 Model Series C447 Vito/V-Class, E57 Electrical Preparation for Trailer Socket, MT2 Emission Standard Euro 6d-TEMP N1, M44 Generator 14 V / 185 A, MG9 Generator Management, MK8 Speed Limitation 210 km/h, XA6 Weight Variant 3,050 kg, J55 Passenger Seat Belt Warning Device, HH9 TEMPMATIC Semi-Automatic Climate Control, KB5 70-Liter Main Tank, V43 Wooden Floor, ZM0 Panel Van, HI1 Climate Zone 1 (Cold/Comfort), LC4 Comfort Roof Control Unit, JH3 Communication Module (LTE) for Digital Services, IK0 Complete Vehicle, LC2 LED Light Band in Cargo Area, CL1 Height and Reach Adjustable Steering Wheel, XO9 Mercedes-Benz MobiloVan with DSB and GgD, FF1 Center Console with Stowage Compartment, XM0 Model Update, MX4 Engine OM 622 DE 17 LA 75 kW (102 HP) 3800/min, FY7 Multi-Button Remote Control, EY6 Breakdown Management, Z3R Premium Tire Protection (3 Years), Z3K Pro, E34 Buffer Battery for Start Process, IN2 Wheelbase 3200 mm, Long Rear Overhang, IL4 Region EU/EFTA, XU1 Signs/Printed Materials in German, VV0 Weld Nuts in Side Wall for Conversions, XM8 Control Code Development, WM0 Control Code Model Update, WN6 Factory Control Code, VF4 Caluma Black Upholstery, ZC5 Sales Code 0 Note Despite careful examination of all our price labels, errors may still occur. These may be due to transmission errors in the systems of various platform providers or mistakes on our part cannot be ruled out. Therefore, please note that all information is supplied without guarantee and does not constitute a legal claim. Furthermore, price labels cannot be declared as a contractual component. Should you particularly value a specific feature from our advertisement, please specify this upon conclusion of the contract. We thank you for your understanding! Podpfox Hav Esx Ahvogi

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: Podswx Aadopfx Ahvegi 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Pgsdpfx Ahevpdhxevoi Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Leasing possible. (All prices are NET)

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, FOR SALE: Dubuit Far East CS-1 Automatic UV Screen Printing Machine 2-Colour Double Head OVERVIEW An exceptional opportunity to acquire a near-new, fully optioned Dubuit Far East CS-1 2023 automatic UV screen printing machine, commissioned in the UK in 2024 barely used since installation. The machine is in full working order and available for inspection at our facility. New replacement cost for this specification $217,000. New units carry a 6+ month lead time from OEM. This machine is available for immediate collection or delivery. MACHINE: DUBUIT FAR EAST CS-1 The CS-1 is a high-speed, compact automatic screen printing machine designed for cylindrical containers. It uses LED UV technology for fast curing, strong colour results, and precise registration. All motion is servo-driven (Schneider Electric PLC and motors) ensuring consistent, repeatable print quality. FACTORY-FITTED OPTIONS (as invoiced): - Double printing head with additional servo and ball screw (2-colour capability) - Registration by sensor under printing position - Pre-registration station with additional servo and colour sensor - Counterpoint under printing - Peristaltic ink pump per head - Antistatic system including power supply - Extra set of jigs - Pick and place infeed for standing bottles - Turntable - Increased stroke to 230mm per colour (upgraded from standard 190mm) - VPN for remote access TECHNICAL SPECIFICATIONS: - Object type: Cylindrical containers - Diameter range: Ø 10mm to 88mm (mandrel) - Object height: 20mm to 210mm (modified) - Maximum print area: 200mm - Maximum print stroke: 270mm - Speed: Up to 4,000 pcs/hour (1 colour); ~1,900 pcs/hour (2 colour with pre-registration) - UV system: LED UV, 80mm long, 16W/cm - Carousel: Vertical, 9-mandrel - Drive: Full servo — Schneider Electric PLC and servo motors throughout - Control: Touchscreen HMI with recipe storage, object counter, stroke/speed settings, troubleshooting guide - Remote access: VPN capability included - Electrical: 5 kW/H (print module) - Air: 6 bar main pressure, 3 NM³ print module - Machine footprint: 1.4m (L) x 1.45m (D) x 1.95m (H) - Net weight: approx. 2,070 kg ALSO INCLUDED: - Dubuit Far East Big Unscrambler Model 712 (1,500mm diameter disk type) - Full original operator manuals - All original factory documentation including technical drawings and electrical wiring diagrams Podpfsyw Sa Dex Ahvogi CONDITION: Fully functional. Barely used since UK delivery in 2024. Available for powered demonstration by prior arrangement. LOCATION: Oxford, United Kingdom COLLECTION: Buyer collects preferred. UK delivery can be arranged. International shipping available — please enquire.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 181174, operating hours: 5,600 h, 5 axis simultaneously and 5 axis free form - CAP Tool system! Accumulated time: Power on: 2026:04'40" Auto open: 1323:07'43" Auto cut: 669:16'50" Total cut: 5606:49'54" Total time: 2028:04'40" Bought new from Mazak factory. Excellent and working condition. Comes with different machining tools. You're welcome to test and see the machine. Year of manufacture: 10-2005 - Max. Schwingdurchmesser …………….…… Ø660 mm - Max.Bearbeitungsdurchmesser ( oberer / unterer revolver ) ………..Ø660 mm / Ø270 mm - Max. Bearbeitungslange ……………....…1016 mm - X – Achsen Verfahrweg ( oberer revolver ) ……………...………….580 mm - X2 – Achsen Verfahrweg ( unterer revolver ) …………….150 mm - Z – Achsen Verfahrweg ( oberer revolver ) …………….....…..1045 mm - Z2 – Achsen Verfahrweg ( unterer revolver ) …………….….990 mm - B – Achsen Verfahrweg ………….…………….….225° Pgedpfx Aed H Eryehvoi - C – Achsen Verfahrweg ………….…………….360° - Spannfuttergrose ……………... 8 “ - Hauptspindeldrehzahl ……………..….5000 o / min - Hauptspindelbohrung ……………...……………. Ø51 mm - Min. Hauptspindelindexierung ……………..………… 0.0001 ° - Spannfuttergrose 2. spindel ……………..………….. 8 “ - Drehzahl der 2. spindel …………….…5000 o / min - Verfahrweg des 2. spindelstocks ( W – Achsen ) ……………..…….. 1050 mm - Eilganggeschwindigkeit des 2. spindelstocks ( W – Achsen ) …….. 30000 mm / min - Min. Indexierung der 2. spindel …………… 0.001 ° - Revolvertyp ( oberer )…………… mit ATC - Werkzeugschafthohe ( oberer )……………..….. 25 mm - Bohrstangenschaftdurchmesser ……………..….. Ø40 mm - Revolvertyp ( unterer )…………….…… trommelrevolver mit 9 stationen - Werkzeuganzahl …………….….. 9 Werkzeuge - Werkzeugschafthohe ( unterer )…………….…….. 25 mm - Bohrstangenschaftdurchmesser …………….... Ø32 mm - Revolverschaltzeit ( unterer )……………. 0.14 s / 1 schaltschritt - Frasspindeldrehzahl …………….. 12000 o / min - Bearbeitungskapazitat der frasspindel ……………. Frasen : Ø100 mm , schaftfrasen : Ø32 mm , Bohren : Ø30 mm , Gewindebohren : M27 -: X – Achsen ( oberer ) …………… 38000 mm / min : X 2– Achsen ( unterer ) ………….…… 38000 mm / min - : Y – Achsen …………… 26000 mm / min -: Z – Achsen ( oberer ) …………….… 38000 mm / min -: Z2 – Achsen ( unterer ) ……………..… 38000 mm / min - Eilganggeschwindigkeit : C – Achsen …………….… 400 o / min - Tippvorschubgeschwindigkeit : X – Achsen ( oberer ) ……….…… 2000 mm / min - Tippvorschubgeschwindigkeit : X2 – Achsen ( unterer ) ………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Y – Achsen ( oberer ) ………….… 2000 mm / min - Tippvorschubgeschwindigkeit : Z – Achsen ( oberer ) …………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Z2 – Achsen ( oberer ) …………… 2000 mm / min - Tippvorschubgeschwindigkeit : C – Achsen …………….… 2000 ° / min - Werkzeugschaft / Werkzeugaufnahmekapazitat …………….. CAPTO C6 No 20 Werkzeuge - Max. Werkzeugdurchmesser …………….. Ø90 mm (Ø125 mm bei freien Nebenplatzen ) 300 mm / 10 kg - Werkzeugwechselzeit ( werkzeug-zu-werkzeug ) …………….. 1.3 s - Hauptspindelmotor ( 30 min -/Dauerbetrieb ) ……………..AC 22 kW / AC 15 kW - Motor der 2. spindel ( 30 min -/Dauerbetrieb ) ……………....AC 18.5 kW / AC 15 kW - Frasspindelmotor ( 20 % ED ) ……………. AC 15 kW - Kuhlmittelpumpenmotor ……………1.2 kW - Leistungsaufnahme (Dauerbetrieb ) …………….….. 66.0 kVA - Druckluftanschluss ……………..…..5 bar , 500 l / min - Kuhlmittel frassungsvermogen des Tanks ……………..….. 300 l - Maschinenhohe ……………..……..2597 mm - Aufstel

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), gearing type: hydrostat, fuel type: hybrid, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 12 l, color: blue, overall weight: 2,900 kg, lifting power: 2,980 kg/m, lifting height: 16,950 mm, tire size: 950 × 180 mm (rupsen), tire condition: 100 %, emission class: euro5, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, adjustable chassis, low noise, onboard computer, rubber tracks, === KEY SPECIFICATIONS === Year: 2024 Operating hours: 0 (new) Max. lifting capacity: 2,980 kg (at 1.8 m – main boom) / 1,000 kg (at 5.2 m – jib) Max. lifting height: 16.95 m (with jib) Max. working radius: 14.3 m Power: Bi-energy (diesel + electric + battery) Remote control: Yes (fully proportional radio control) Jib: Included (3-section, hydraulic telescopic) Attachments / additional equipment: LED work lights, tilt alarm, hydraulic safety valves, datalogger, variable crawler gauge, automatic multi-position outriggers Track type: Rubber tracks (non-marking) Track size: 950 × 180 mm Pgodpsxg A Twsfx Ahvoi Track condition: New Weight: approx. 2,900 kg CE certification: Yes === HIGHLIGHTS === Bi-energy mini crane (diesel + electric) – suitable for indoor & outdoor use Zero-emission operation possible in electric mode Fully automatic telescopic boom with jib up to 16.95 m Fully proportional radio remote control Compact design (only 780 mm width) – ideal for confined spaces CE certified and ready for immediate use === CONDITION === New machine – never used. Factory-new condition with full warranty and CE certification. Color: blue Price: €119,500 (EXW / excl. VAT) === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. === DESCRIPTION === The Maeda MK 3053 CW is a modern bi-energy mini crane equipped with a fully automatic telescopic boom and 3-section jib, offering a maximum lifting height of 16.95 m and a working radius of 14.3 m. Thanks to the combination of a diesel engine and electric drive, this crane is suitable for both outdoor use and zero-emission indoor applications. With its compact dimensions and narrow crawler undercarriage, the MK 3053 CW is ideal for work in confined spaces such as installation, glazing, and maintenance projects. The fully proportional radio remote control ensures maximum precision and ease of operation. === DELIVERY === Crane loading available on request. Flexible transport solutions tailored to your project and destination. All logistics handled professionally by Collé Rental & Sales.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), fuel type: electric, color: green, overall weight: 2,880 kg, lifting power: 2,980 kg/m, lifting height: 16,950 mm, tire size: 950 × 180 mm (rubberen rupsen), tire condition: 100 %, mast type: telescopic, Year of construction: 2024, Equipment: UVV, adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, === KEY SPECIFICATIONS === Pgodpfjxg A Ibjx Ahvji Year of manufacture: 2024 Operating hours: New Max. lifting capacity: 2,980 kg (at 1.8 m) / 1,000 kg (at 4.7 m – jib) Max. lifting height: 16.95 m Max. working radius: 14.3 m Drive system: Fully electric (battery powered) Remote control: Yes (radio remote, proportional) Jib: Included (3-section, hydraulic telescopic) Attachments / additional equipment: Hydraulic winch, hydraulic telescopic jib, remote control, LED work lights, safety valves, tilt alarm, datalogger, non-marking rubber tracks Track type: Rubber tracks (non-marking) Track size: 950 × 180 mm Track condition: New Weight: approx. 2,875 kg CE certification: Yes === HIGHLIGHTS === Fully electric mini crawler crane (zero emission) Ideal for indoor and emission-restricted environments Low noise operation Fully automatic 5-section telescopic boom 360° continuous slewing with precise control Fully variable hydraulic outriggers Low ground pressure, suitable for sensitive surfaces CE certified and ready for immediate use === CONDITION === New machine – factory condition, unused and immediately available. Fully tested and inspected. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: €149,500 (EXW / excluding VAT) The Maeda MK 3053 CB is a compact and powerful fully electric mini crawler crane, offering a maximum lifting height of 16.95 metres and a lifting capacity of up to 2.98 tonnes. Thanks to its battery-powered electric drive system, this crane is perfectly suited for indoor applications and environments with strict emission requirements. Its compact dimensions and precise radio remote control make the MK 3053 CB ideal for installation, glazing and maintenance work where precision, low noise and zero emissions are essential. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to destination and logistical requirements. All transport is handled professionally by the Collé Rental & Sales logistics team.

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 2,500 mm, total width: 850 mm, overall weight: 155 kg, inner dimension width: 733 mm, inner dimension length: 2,343 mm, tank capacity: 753 l, energy consumption: 5 kWh, power: 50 kW (67.98 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; Pgodpfxerhwrbe Ahvji - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 3 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 1,850 mm, total width: 100 mm, overall weight: 142 kg, inner dimension width: 863 mm, inner dimension length: 1,723 mm, inner dimension height: 733 mm, tank capacity: 595 l, energy consumption: 5 kWh, power: 0.4 kW (0.54 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) Pedpfxorhwt Se Ahvogi - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up Btqqmuwb - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)