Used Centricator for sale (56)

Condition: used, mileage: 50,402 km, power: 70 kW (95.17 HP), first registration: 11/2020, fuel type: electric, overall weight: 3,500 kg, next inspection (TÜV): 09/2026, color: gold, gearing type: automatic, number of seats: 2, loading space length: 3,300 mm, loading space width: 1,770 mm, loading space height: 2,050 mm, Year of construction: 2020, Equipment: air conditioning, central locking, Mercedes eSprinter 312 FWD L2 47 kWh battery included Range: 170km TÜV valid until 09/2026 Rear-view camera Air conditioning PDC (Parking Distance Control) Mercedes-maintained service history Cargo area dimensions: Length: 3300 mm Width: 1770 mm Height: 2050 mm Special features: • 3-button remote control for central locking • Overhead storage compartment above the windshield • Passenger-side airbag • Electrically folding exterior mirrors • Electrically adjustable and heated exterior mirrors (both sides) • Blind spot assist in exterior mirrors • Exterior mirrors without integrated turn signal • Side indicator lights at the front • Cargo area ceiling light with motion sensor • Entry handle on right rear pillar • Driver assistance system: Active Brake Assist • Driver assistance system: Attention Assist (drowsiness detection sensor) • Electric parking brake • Speed limiter (100 km/h) • Additional main key • Rear doors (opening angle 270 degrees) • Hinged lid for storage compartment • Terminal strip for electrical connections (driver’s seat base) • Comfort lighting in passenger/cargo area • LED cargo area light • Cable duct at rear portal • Cable duct at side wall • Mechanically adjustable steering column • Programmable special module • Rear-view camera with integrated display in interior mirror • Acoustic reversing warning (external warning signal) • Windshield wipers with rain sensor • Passenger-side seatbelt warning system • Driver’s cab seats: Driver seat Plus (with flat seat surface) • USB port centrically located beneath dashboard (charging only) Bodpfx Aaox Sfzkofelc • Fleece battery 92 Ah • Prepared for partition wall installation • Jack • Heat-insulating glazing (windshield with top band filter) Other equipment: • 3rd brake light • Adaptive brake light • Driver airbag • Hill-start assist • MB audio system radio with USB and Bluetooth hands-free • Outside temperature display • DAB digital radio tuner • Automatic headlight activation • Entry handle for sliding door on partition wall • Electric motor 85 kW (continuous 70 kW) • Driver assistance: Breakdown management • Crosswind assist • Transmission for electric vehicles • Hold function • HV battery 47 kWh • High-roof van body, standard length • Communication module (LTE) for digital services • Charging cable (8.0 m) with Type 2 plug (20 A, Mode 3) • Truck registration • Side marker lights • Mercedes-Benz emergency call system • Wheelbase: 3924 mm • Sliding door cargo/passenger compartment right • Driver’s side seatbelt warning system • Upholstery: Fabric • Passenger single seat in driver cabin • Heated driver’s seat • Steel rims 6.5x16 • Rear door step • Gross vehicle weight: 3.5 t Sale to trade, commerce, and export only. Vehicle delivery within Germany available for an extra charge. Browse our stock of over 150 immediately available vans and arrange a test drive today. We look forward to your visit! * TEST DRIVES * Your trust is in good hands with us. For your peace of mind, we offer a free, non-binding test drive at any time. * TRADE-IN * We are happy to make you a fair offer for your current vehicle. * FINANCING OR LEASING * Financing or leasing is possible at a low monthly rate – also without a down payment. Together, we’ll find a cost-effective, tailored financing option for you. * DELIVERY INSPECTION *

Condition: ready for operation (used), functionality: fully functional, overall weight: 30 kg, 2 sets of hard reversible top jaws for RÖHM power chucks (centrically clamping) 2 sets of soft top jaws for RÖHM base jaws Mounting on base jaws for the following chuck types (base jaws available on request): For chuck types: RÖHM ZGU 500, 630, 700 RÖHM ZSU 500, 630, 700 UGU 500, 560, 600, 630, 710 USU 500, 560, 600, 630, 710 ---- Dimensions: hAB = hard top jaws = width B = 63mm wAB = soft top jaws = width B = 50mm ---- 2 mounting holes ø 20mm Bodpfx Aaowu R Nrofslc Bolt spacing 76mm Longitudinal keyway jaw 12.7mm Transverse keyway jaw 17.0mm ---- Total weight approx. 40-50Kg RÖHM ZS chuck diameter: ø 500mm; ø 600mm; ø 800mm ----- Signs of use present. The jaws are cleaned, inspected, and in good condition.

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate Blodpfjb A Ig Asx Aafjc -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Condition: new, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Full specification available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-crossmembers, designed for high point loads Coupling Device: * 2-inch kingpin Landing Gear: * 2 x 12 t landing legs with compensating foot, single-sided operation on the right (FR) Axles: * 3 x 9 t air suspension axle units * Brand: SAF, with disc brakes approx. 430 x 45 mm * ABS * Hub-centric wheel connection, 10-hole, with offset 120 mm * Total air suspension lift approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled by rotary valve with detent function Brake System: * Dual-line compressed air brake system according to EU standard, with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Mistake-proof coupling heads fixed to the front cross member, without connector to the tractor unit Tires: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 offset 120, brand of our choice Mudguards: * According to EU standard, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 double basket with mounting material for a spare wheel with offset 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, traction approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, traction approx. 2.5 t * Outer frame drilled every approx. 500 mm for lashing belts Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in outer frame Lighting System: * According to EU standard, 24V, with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline marker lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin sockets on the front cross member Equipment: * ECE 70 warning plate * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and finished in a single color * Chassis: RAL 3002 flame red * Drop sides: anodized * Drop side supports: RAL 3002 flame red * SSV: aluminium anodized * Hubs: KTL * Underride guard: white (RAL 9010) * Attachments: galvanized/black KTL * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control Bjdpfx Aewx Db Aoafslc * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside the front wall * Drop sides: 5 x 250 mm drop sides and rear wall made of anodized aluminium hollow profiles, foldable and removable, detachable Kinnegrip stanchions * Side and stanchion magazine: insertion rails for drop sides and stanchions under the chassis on left and right * Container locks for 1 x 40' and 2 x 20' containers at the rear, container lock for 1 x 20' container in the center * Work spotlight on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm Extras: Rental available

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft Bledsb A Rdqspfx Aafec -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft Blodpfxsb A Rdlj Aafsc -Weight: 6 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric Bedpfob A Rfcjx Aafelc -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate Bjdpfsb A Rd Esx Aafjlc -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg Bedsb A Rfmopfx Aafolc

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg Bedpfx Aaeb A R Hvjfolc

Condition: used, functionality: fully functional, Bore: 50 mm Centric mounting Bljdperqwphsfx Aafoc

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper AG 0303, unused in original packaging, 100% functional, scope of delivery as per photos Bljdjx Eudhopfx Aafsc

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Bjdpfx Aex Eudnjafelc

Condition: like new (used), STOCK AVAILABLE AT Type: KFV-400-3-A15 Manufacturer: SMW Condition see pictures (in stock) Description: • Power operated 3-jaw special wedge hook chuck. • Designed for external and internal clamping • Centrically clamping • Spindle side mounting according to DIN 55026, size A15 • With individually adjustable base jaws • Top jaw side interface with 3/32 "x90° pointed teeth • Chuck outer diameter: 400 mm (Swing: 430mm) • Adjustment range / jaw: +/- 1.5 mm • Center position is indicated by indicator pin • Chuck actuation stroke: 42mm • Jaw stroke: 10,7 mm • Max. actuating force: 72 kN • Max. Clamping force: 180 kN • Max. Speed 2000 1/min. Bedpohg Tddefx Aafslc

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Bedpfxot Uufbo Aafolc Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Blsdet Uuf Uepfx Aafjc Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), BJ. 1999+2001 Combined Crankshaft Machining Combination of centric turning and eccentric milling operations on two machines connected via a shared chip conveyor with a single chip discharge. Siemens 840D control system Tool holder - Heller Nominal tool diameter Ø700 - tools are not included but can be purchased or newly acquired for an additional charge. NC-controlled steady rest for milling operations 3-jaw chucks on both sides from Blessing with integrated alignment arms Both machines with automatic loading hatch from above with a loading interface or for manual loading. The machines are currently still in series production and can be inspected under power. Installation of components is possible upon request for an additional charge, with documentation of the interchangeable parts and tools. Safety lock for the control system and drives included - free location. Availability upon request, warranty excluded. Year of Production: 1999+2001 Combination of concentric turning. and eccentric Milling Operations in 2 separate machines, which are linked through a common chip conveyor with high drop-off Machine control: Siemens 840D Tool Adapter - Brighter Tooling diameter Ø700 nominal - Tooling is not subject might be subject for separate purchase or new from supplier NC controlled support with pads both sides 3-jaw-chucks from Company Blessing with integrated equalizing device automatic Gantry door for overhead loading and corresponding interface or manual loading also possible Machines are actually in serial production and can be inspected upon request Blsdpfxev I Ab Us Aafsc set-up of individual parts possible for separate oncost including documentation of change-over parts and tooling safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 280 mm, turning length: 1,430 mm, turning diameter: 500 mm, spindle bore: 82 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 7 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,430 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 7 rpm, rotational speed (max.): 2,200 rpm, total height: 1,620 mm, total length: 3,330 mm, total width: 1,750 mm, quill diameter: 75 mm, quill stroke: 150 mm, overall weight: 2,700 kg, chuck outer diameter: 250 mm, spindle nose: CAMLOCK D1-8, center height: 250 mm, bar diameter (max.): 82 mm, Controller FANUC 0i-TF Plus (5) Fanuc manual guide 0i 3-jaw self centric chuck dia 250 mm (manual clamping Spindle motor with frequency regulator 7.5 kW 4-tools electric turret Tailstock with quill MT4 Bsdpfexxyhcox Aafslc Fully enclosed splash guard Coolant system with tank Automatic lubrication system Safety switches on the doors Formal CE norm for EU

Condition: used, Year of construction: 2022, Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with, the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting-edge solution in the liquid thermal treatment sector. This machine, meticulously designed by UDMACHINES, is a model PAS-10000-45-2P-E. It’s distinguished by its operational efficiency and precision, setting a new standard in the industry. Key Characteristics UDMACHINES, known for their innovation, manufactured this “Used Flash Pasteurizer” in 2022, making it a relatively new addition to the market. Importantly, it boasts a remarkable operational capacity of 10,000 liters per hour. This capacity is a testament to its significant efficiency, especially in handling large volumes for treatment. Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method, a critical feature. Specifically, it rapidly heats liquids to 90 °C. This process is not only swift but also ensures the effective thermal treatment of the liquid. Moreover, it does so while maintaining the original organoleptic properties of the product, a vital aspect for quality preservation. Current State and Safety Features Currently, the “Used Flash Pasteurizer UDMACHINES” is in storage, a crucial factor for its preservation. This storage condition is ideal for keeping the machine in an excellent state, ready for its next operational cycle. Additionally, the machine is equipped with comprehensive safety features. These features are paramount, ensuring safe and reliable operation, a necessity in today’s stringent industrial environments. Manuals and Maintenance Furthermore, the availability of complete and detailed manuals is a significant advantage. These manuals provide extensive instructions on both operation and maintenance. This availability ensures that operators can fully understand and efficiently manage the machine’s functionalities. Also, it underscores the importance of regular maintenance for optimal performance. Technical Specifications Delving deeper into its specifications, the machine’s design is both robust and user-friendly. It features user-centric controls and interfaces, simplifying the operational process. Additionally, the construction materials are of high quality, ensuring durability and longevity. Industry Applications and Versatility The Used Flash Pasteurizer UDMACHINES Year 2022 is incredibly versatile, suitable for various industries. From beverage production to dairy processing, this machine can adapt to different liquid types and processing requirements. This versatility makes it a valuable asset for diverse processing plants. Energy Efficiency and Environmental Considerations Bsdpfx Asvgt S Ioafolc Equally important, the machine is designed with energy efficiency in mind. This efficiency reduces operational costs and aligns with environmental sustainability goals.

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter Bjdpfxsd Dk A As Aafjlc - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, thickness of jaw 160 mm clamping capacity 24 kN weight of the machine ca. 31 kg Bjdpfx Aaed Ih N Rjfolc mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation

Condition: ready for operation (used), Year of construction: 2009, operating hours: 32,705 h, functionality: fully functional, machine/vehicle number: 518MT-119, travel distance X-axis: 630 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 500 mm, milling spindle speed (max.): 20,000 rpm, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! 5-axis machining centre with comprehensive equipment package! TECHNICAL DETAILS Axes: X-axis: 630 mm Y-axis: 320 mm Z-axis: 500 mm B-axis: -45° to +100° U-axis: 477 mm Main Spindles: Main Spindle A: Hainbuch Spanntop SP.0618.01778.00 Max. speed Main Spindle A: 6,000 rpm Main Spindle C: Hainbuch SK65, max. Ø 65 mm Max. speed Main Spindle C: 3,000 rpm Milling Motor Spindle: Taper: HSK63 Max. speed: 20,000 rpm Tool Magazine: Tool positions: 72 Control: Fanuc 16i MB MACHINE DETAILS Electrical Data: Voltage: 3 × 400 V / 50 Hz Fuse protection: 80 A Power: 55 kVA Dimensions & Weight: Dimensions without magazine (W x D x H): 285 cm x 280 cm x 280 cm Net weight: 4,600 kg Operating hours: 32,705 h EQUIPMENT Bjdpfx Ajwzxxnjafjlc Renishaw TS27R probe Tool breakage control Detector 202 Workpiece breakage control Detector 101 Spreitzer centric vise HZS 180-80 A WM Spindle coolant Marksa type CPOW 1000 Bar feeder Breuning SiMag type 70.1 Driven tools Denitool Modulo D Chip conveyor NB 300 cam plate chain Signal light Werma CO₂ fire extinguisher Kraft & Bauer

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk Bljdpfx Aajq Umcrefjc 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: used, diameter 190 mm base jaws which are centrically adjustable top jaws which are individually adjustable Bsdpfx Ajvimwisafolc   through-bore 50 mm hole circle 176 mm height 145 mm weight 14.5 kg  

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Modell:R65-360-7-EM, number of straightening rollers: 7, conveyor belt width: 360 mm, straightening roller diameter: 65 mm, product height (max.): 4 mm, feed roller diameter: 65 mm, power: 0.002 kW (0.00 HP), overall weight: 1,500 kg, operating speed: 20 mm/s, product width (max.): 360 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Equipment: documentation/manual, Technical specifications / equipment of the straightening machine: • Strip width 30 - 360 mm • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body in a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground mounted in maintenance-free roller bearings AG drive, via spur gear motor with double chain drive EM self Variable speed drive via frequency converter with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges Bjdpewhginsfx Aafslc RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press: