Used Cartridge Dust Collector for sale (27,773)

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Fgedpjhpmawofx Ab Tjk Weight: 178 kg

Condition: used, Year of construction: 2021, Year of manufacture 2021 Dimensions and weights Fedpfx Aewb Ekdeb Tsgk Length (product) approx. 1700 mm Width/depth (product) approx. 600 mm Height (product) approx. 2400 mm Weight (net) approx. 69 kg Chip collection volume 2 x 215 l Nominal diameter of suction nozzle inlet: 260 mm Nominal diameter of suction nozzle outlet: 2 x 100, 2 x 120 mm Electrical data Idle speed 2950 rpm Supply voltage 400 V Mains frequency 50 Hz Power input 3.8 kW Power output 3 kW Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Voltage flow Nominal flow rate 4300 m³/h Vacuum pressure max. 2000 Pa SCOPE OF DELIVERY Fine filter bag Two bags of shavings Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm Fgodpfxjrp Ii Uj Ab Tok -Weight: 100 kg

Condition: ready for operation (used), Max. air supply: 5bar, operational temperature: -10 to 50°C, max. connected load: 200W, with documentation. Fgsdpfx Aboiu H Itj Tjk

Condition: used, filter area: 17.6 m², volume flow: 930 m³/h, intake manifold diameter: 180 mm, nominal power: 15 kW (20.39 HP), Kiekens filter Fsdpfx Aew Rbwwob Togk including filter bags (used) Separate fan unit with matching ductwork from filter to fan. filter surface area 17.6 m² 15 kW fan 32.0 kPa max. 930 m³/h max. mechanical cleaning: 0.25 kW 1.1 A 690 rpm

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Fgjdoihu T Tjpfx Ab Tok

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Fgodpfx Abspfat No Tek Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Fsdpfx Abow Hw Dgj Tjgk

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Fsdpfxewwt Aae Ab Tsgk Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: good (used), Delta New Poluclean P30 dust extraction system Delta New Poluclean P30 Dust extraction system 400 V 5,5 kW 3500 m³/h 95 liters weight: 361 kg Dimensions: HxWxD = 300 x 100 x 97 cm Fsdpfx Absihfwpj Tegk More extraction units in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Dust cyclone Stainless, dust separator, used machine -inclusion dimensions: 1900x1600x6200mm - mantle size: diam. 1600x5200mm Fsdpfx Abettvrfe Tegk -stem dimensions: 630x310mm; diameter 280 - weight: 800 kg

Condition: new, Year of construction: 2024, volume flow: 3,000 m³/h, total length: 1,500 mm, total height: 2,000 mm, input voltage: 380 V, power: 3 kW (4.08 HP), Odprasivac sa 2 vrece ulaz fi 180mm , takodje vrsimo izradu raznih vrsta odprasivaca po zelji kupca Fsdpfx Abet Etpye Togk

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Fgedopfat Topfx Ab Tjk Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Extinguishing device: yes Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: excellent (used), GEA OptiAir dust extractor unit. 2015 machine in nice condition. We have GEA OptiFlour II 600 units in stock to run with this. Fgedpfx Abov Ig Rmo Tek

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point Fgedpfx Abjl Dw U Dj Tok capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: ready for operation (used), Dust Cyclone, Dust Separator, Dust Extractor, Abrasive Overall dimensions: 1900 x 1500 x 2200 mm Inlet diameter ø: 200 mm Outlet diameter ø: 250 mm Cyclone diameter ø: 1230 mm Fodjvr U Etopfx Ab Togk Cyclone body height: 630 mm

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Fedpfx Abjib Dadj Tsgk Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Fgodpfxsnyhvqs Ab Tek Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Inlet diameter - 400 mm Fgodpfx Abstixlbj Tjk Control cabinet with technical documentation included.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Fgsdpfxeuy N S Uo Ab Tsk Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Fedpfemrm Rajx Ab Togk Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Fgedpfepgnfdox Ab Tok Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Fedpfx Absn Nw Nto Tegk Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket 11 Kw fan in sound absorbing housing Capacity 3500m3/h Negative pressure 7000 Pa Fodpfx Abeg Rhfbj Tegk Filtration area 24 m2 Automatic filter cleaning by electric motor. The extractor has been working on graphite processing.

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before Fsdpfx Ashm E S Asb Tjgk The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition