Used Cake Cutting Machine for sale (66,623)

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Itsdpfxohwrgts Aa Eji Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Ijdpfxoy Sgmno Aa Esti

Condition: used, Year of construction: 1973, KRUPP FS-74 Cutting Machine - incl. dual brake unit (250kg) - incl. drive system - speed control - winding monitor Iodpfeytcw Rjx Aa Eoti The system is available twice. (price per unit) Please note that the machine must be dismantled, packed, and collected by the buyer.

Condition: good (used), Year of construction: 2017, laser type: fiber laser, laser power: 700 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, Equipment: cooling unit, documentation/manual, Well-maintained HSG HS-M3015C fiber laser cutting machine manufactured in 2017, previously used in daily production at our metal fabrication company. The machine was replaced only due to the installation of a newer, higher-capacity laser cutting system as part of our production upgrade. It was fully operational until it was dismantled and is offered directly by the end user. The machine is complete, carefully dismantled, and ready for immediate pickup. Iodpszmbyvjfx Aa Esti This laser is an excellent choice for companies processing thin sheet metal, where reliability, low operating costs, and precise cutting are more important than very high laser power. Technical Specifications Manufacturer: HSG Laser Model: HS-M3015C Year of manufacture: 2017 Laser source power: 700 W Working area: 3000 × 1500 mm Power supply: 380 V / 50 Hz Fiber laser technology Cutting Capacity Mild steel: up to 8 mm Stainless steel: up to 3 mm Aluminum: up to 3 mm Included Equipment Cooling unit (chiller) Machine documentation User manual Condition Fully operational before dismantling Complete machine Ready for immediate pickup Inspection possible by appointment Loading assistance available Why choose this machine? Direct sale from the end user Used in regular production until replacement No accident or damage history Selling only due to production modernization Well maintained Cost-effective solution for sheet metal fabrication Location: Czech Republic

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Itjdpfx Aajv Hm A To Esi Automatic cylinder adjustment in the Down-Cutter station: When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted Itedpfx Asuk U I Uoa Eoi COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, laser power: 4,400 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, with ByLaser 4400 with turning axis ByVision cnc control with changing table Technische Daten / technical details: Blech-Nennmass X, Y / sheet nominal size X, Y 3000, 1500 mm Schneidbereich X, Y / cutting range X, Y 3048, 1524 mm Hub Schneidkopf Z / stroke cutting head Z 170 mm Isdpfxoy N Rgmj Aa Eeti Drehachse: / turning axis: Profilaufnahme Spannfutter / profile taper clamping chuck 15-315 mm Profilzuführung durch das Spannfutter / profile feed through the clamping chuck 15-155 mm max. Profilbearbeitungslänge / max. profile working length 2700 mm Laserleistung / laser capacity 4,4 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Gewicht ca. / weight ca. 13500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL Steuerung, _____ Description: Year of manuf. : 2021 Power : 4 kW Itjdpfxozkxkgj Aa Eei Standard equipment Working area:4000 × 2000 mm Control cabinets:Integrated :Drive and machining technology: :Gantry drive combined with linear direct drives Waste removal:Longitudinal conveyor belt Positioning laser diode:Fitted Spray system:Fitted Automatic nozzle cleaning:Fitted Features :- NitroLine :- AdjustLine :- ControlLine :- FlyLine :- FocusLine :- FastLine :- PierceLine :- Brass cutting set :- Copper cutting set Laser TruDisk 4001 - Power:4 kW :- BrightLine fibre :- High-speed cutting package :- Power package for fusion cutting Additional machine functions :- Drop&Cut :- Integrated camera 1 for process monitoring Additional cutting packages :- High-speed Eco cutting package :- Pneumatic cutting Technical specifications Simultaneous operation:170 m/min Average positioning deviation (Ps):0.03 mm Positioning deviation (Pa):0.05 mm Minimum programmable step:0.001 mm X-axis:4000 mm Y-axis:2000 mm Z-axis:116 mm Maximum workpiece weight:2000 kg Structural steel:25 mm Stainless steel:20 mm Stainless steel (extended):35 mm Aluminium:20 mm Copper:8 mm Brass:8 mm Software:incl. software licence

Condition: excellent (used), thread dia. 36 mm Isdpfx Aajyhq S Es Esti

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: D08L/8302, Offer Number: D08L/8302 Machinetype: straightening and cutting machine Make: BÜNDGENS Type: UDW0 Constr. year: 2001 diameter range: 0,2-1,3 mm cutting length: 5-300 mm speed - meters/min: 15 Isdpewi Tfrjfx Aa Esti Location: In our warehouse

Condition: used, Year of construction: 2022, Electronic Double Head Cutting Saw – PERTICI 500TS / 500TS-22 Electronic double head cutting saw by PERTICI INDUSTRIES, designed for high-precision cutting of PVC and light alloy profiles. The machine is equipped with a fixed left head and a movable right head with automatic linear and angular positioning electronically controlled. Ideal for the professional production of windows and doors. Main features Automatic double head cutting saw Movable right head with automatic positioning Automatic head rotation: 90° / 45° (500TS) 90° / 22.5° (500TS/22) Programmable electronic control 15” TFT Touch Screen monitor USB and Ethernet ports Windows CE / Windows Embedded operating system Cutting list optimization Automatic profile height correction Possibility to work with one head only Full pneumatic safety guards Two-hand safety cutting control system Machinable materials Iodey Rl Syopfx Aa Eeti PVC Plastic materials Light alloys / aluminium Cutting capacity Available lengths: 4,000 mm 5,000 mm 6,000 mm Maximum cutting length: up to 6,100 mm Blade Ø 500 mm (optional Ø 520 mm) Automatic cutting angles: 90° 45° 22.5° (TS/22 version) Technical data Number of blades: 2 Motor power: 4.4 kW each Blade speed: 2800 rpm Power supply: 400 V three-phase Air pressure: 6.5 – 8 bar Weight: approximately from 1670 to 1910 kg Blade peripheral speed: up to 76.2 m/s Equipment Horizontal and vertical pneumatic clamps Side roller supports Full cutting area safety protections Industrial label printer preparation 15” Touch screen on Windows platform Profile thickness probe (electronic profile thickness detection device) – photo no. 7 Central anti-bending profile support – photo no. 8

Year of construction: 2022, operating hours: 9,500,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm Ijdpfxezl Skpj Aa Esti

Condition: like new (used), Rofin DC 025 laser source, in working condition. Itodpezkuzhjfx Aa Esi

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Itjdpfx Aajg R Hrqs Esi Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, Features Year of manufacture: December 2024 Working area: 1300 × 1300 mm Laser power: 3,000 W Itjdszkt Tcopfx Aa Eei Laser type: Fiber optic (Raycus, MAX, or IPG) Cutting head: Raytools with autofocus Positioning accuracy: ±0.008 mm Repeatability accuracy: approximately ±0.02 mm Maximum speed: 40 m/min Maximum acceleration: 0.5 G

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Itedjywwrfspfx Aa Eji Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: good (used), Code: 0438 Brand: CASATI MACCHINE Model: CIO 31 - CE Standard Hydraulic veneer guillotine for furniture, woodworking shops, custom-made furniture, doors, veneers, and various applications - CE Standard Technical Specifications: Cutting length 3100 mm Iedpszkqw Esfx Aa Ejti Working presser opening 45 mm Electrically operated rear stop Max stop depth 600 mm Min stop depth 25 mm Hydraulic power unit motor power 4 Hp Front stop Safety photocells Overall dimensions mm 4100 x 1000 x 1600 h Weight kg 2200

Condition: ready for operation (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 325, overall weight: 350 kg, fuel type: electric, color: white, PSA HSA2500 semi-automatic tube cutting system for cardboard tubes Functions: Manual feeding of the tube Automatic clamping Automatic feeding Automatic length measurement Automatic cutting process PLC control with display Storage of up to 50 different tube lengths and 3 quantities Suitable for: Paper tubes Plastic tubes Iedpfx Asy Nyb Tea Esti

Condition: used, Year of construction: 2022, cutting range for steel to 25 mm working range 3000 x 1500 mm 120 mm Power connection 300VA 16 A Iodpozkl Hbefx Aa Eoti machine weight ab. 900 kg Overall size 3560x1960x1000 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, For sale: ROTOX ZSA 263 automatic profile cutting machine, year of manufacture 2012. The machine is in working condition, regularly used, and available for inspection and testing by prior appointment. Main features: - CNC control system - Cutting angles: 45°, 90°, and 135° - Pneumatic profile clamping - Automatic profile feeding - Right and left side material transport - Suitable for automatic cutting of PVC profiles The ROTOX ZSA 263 is a reliable and high-performance industrial machine, ideal for companies involved in window and door manufacturing. Itodpoy Sk Amefx Aa Esi For more information or to arrange a viewing, please feel free to contact us.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, working length: 12,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – 3-Chuck System with 45° Laser Head The ACME tube and profile laser system is a powerful CNC fiber laser cutting machine designed for high-precision processing of tubes and profiles across a wide range of sizes and applications. Technical Features and Specifications 3-Chuck System (all chucks traversable) For maximum flexibility, precise material handling, and virtually waste-free production (zero-tail cutting). Vertical linear guides Robust machine construction ensures high stability, accuracy, and vibration damping, even with large workpieces. Itedpfx Aaszl Dgvj Eoi Processing Diameters (optionally available): Ø 280 mm Ø 360 mm Ø 550 mm Laser Power Options: 3 kW 6 kW 12 kW Maximum Processing Length: Up to 12,000 mm (12 meters) for long stock and industrial applications 45° Laser Cutting Head Enables miter cuts and complex cutting geometries without additional post-processing. Automation & Material Handling Semi-automatic loading and unloading system Efficient material infeed and removal to minimize setup times and manual intervention. Integrated small parts conveyor Clean separation and automatic discharge of finished parts and remnants. Quality & Safety Components from renowned international manufacturers High-quality laser sources and cutting heads from Max Photonics and Boci CE-compliant machine design in accordance with EU machinery directives Key Advantages at a Glance High precision for complex tube and profile geometries Efficient production through semi-automatic handling Flexible configuration for various material diameters and power options Reduced material waste through optimized chuck technology

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5561703, Format (cm): 76 Equipment / Additional information: Side tables, air table, 1x reserve knife Iedpoydcuqofx Aa Esti

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New laser cutting machine with 12 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A meticulously developed cutting parameter library is included, as well as first-class service. Please also consider our attractive leasing/financing options. - Machine with automatic shuttle table - Machine bed lined with graphite plates - Machine measured and aligned using the Renishaw system (including inspection protocol) - Very space-saving design - Extremely energy-efficient cutting system - Only approx. 8.5 x 3.5 meters footprint - 12 kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule your inspection now! Cutting capabilities: - Steel sheets up to 35 mm - Stainless steel sheets up to 20 mm Itodpfx Aasxg Dn Ae Esi - Aluminum sheets up to 20 mm - Travel range: 1500 x 3000 mm - CNC control system in German - Safety light curtain for maximum operator protection - Extensive collision protection features for the cutting head - Large laser safety windows on three sides for monitoring the cutting process - Automatic, programmable 3-gas switching system (compressed air, nitrogen, oxygen) - Comprehensive cutting parameter file - Includes nesting module - Very user-friendly - High-performance laser chiller - CNC control system in German - Extensive service and warranty packages - Powerful laser chiller - Filter extraction system optional Sale is strictly to commercial customers only. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 5500 kg Need a different laser power, table type, or table size? No problem. I will gladly provide a tailored offer. For example: 2 kW machine from €29,990 or 6 kW machine from €79,900 Not sure which laser power is right for your application? Just call us! Of course, I will carry out cutting trials per your requirements. There are many possibilities here.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: HypCut, laser type: fiber laser, laser source manufacturer: MaxPhotonic, laser power: 20,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 100 mm, sheet thickness aluminum (max.): 60 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 12 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 20 bar, overall weight: 9,500 kg, warranty duration: 12 months, door opening width: 1,000 mm, door opening height: 2,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, New laser cutting machine with a 20 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of supply, as is first-class service. - 20 kW laser power for maximum performance - Machine incl. automatic exchange table - Machine bed lined with graphite plates - Machine measured and adjusted with Renishaw system (including measurement report) - Space-saving - Extremely energy-efficient cutting system - Requires only approximately 9.5 x 3.5 meters of floor space - 20 kW laser source from MaxPhotonics (G5/EU) The following options are also available: Isdpjyhhnkefx Aa Eoti - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Vision Control (positioning and nesting via camera system) - Top quality, schedule a viewing now! Cutting of steel sheets up to 50 mm Cutting of stainless steel sheets up to 50 mm Cutting of aluminum sheets up to 50 mm - Travel range 1500 x 3000 mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - On three sides, large laser protection windows for observing the cutting process - Automatic, programmable 3-gas switching (Compressed air, nitrogen, oxygen) - Extensive cutting parameter file - Incl. nesting module - Very easy to operate - High-performance laser cooler - Machine control in German - Extensive service and warranty services - High-performance laser cooler - Filter extraction system optional Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5 m Height: 2.3 m Width: 3.5 m Total weight: approx. 9500 kg Do you need a different laser power, table shape, or table size? No problem. I would be happy to prepare a suitable offer for you. e.g. 2 kW machine from 29,990 euros or 6 kW machine from 79,900 euros Are you unsure which laser power is suitable for your application? Just call! Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding Itedpfsg Tu N Aex Aa Esi With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.