Used Cable Slot Machine Superior K 74 for sale (92,689)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Nodsz D Taaopfx Af Solg Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, high-speed planer, keyseating machine, keyway broaching machine, keyway broaching machine, keyway tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, power high-speed planer -Manufacturer: Lange & Geilen, horizontal slotting machine Kraft-Schnellhobler -Stroke: 350mm Nledpfslzmxyox Af Seg -Stroke rate: 20 - 110 1/min -Clamping table: 380 x 280 mm -Travel: X 410 mm Z 320 mm -T-Slot: 14mm -Propulsion: AEG 3 kW -Dimensions: 1460/1170/H1350 mm -Weight: 1140 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x900x1160 mm Weight 120 kg Nedpfxevz Hk Te Af Solg Total power requirement 2,2 kw

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm Nodpfxexr N Rms Af Selg MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: used, Year of construction: 2009, Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: Nlsdozk H E Sopfx Af Ssg o LDPE o HDPE o MDPE Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System: • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment: • Unwind unit • Photocell • Anti-static bars

Condition: used, Year of construction: 1971, Used long hole boring machine Brand: Rex LB MK/S Year of manufacture: 1971 Motor power: 1.7 kW Table size: 400 x 220 mm Drill chuck: 2-jaw chuck Motor speed: 2860 rpm Nlodpfxjypbx Sj Af Sog Required space (LxWxH): approx. 900 x 700 x 1200 mm

Condition: used, Year of construction: 2005, CNC machining center Manufacturer: Homag Type: PROFI BOF 722/58/18/F/K Year of manufacture: 2005 Technical data - Machining area: X = 6000 mm / Y = 1800 mm / Z = 380 mm from the suction cup - 5-axis swivel head (replaced in 2019) - Rear spindle with Flex5 unit - 2 traversing tool changers with 18 positions each - Computer with Windows 10 (new 1.5 years ago) - Woodwop 8.1 - 2nd vacuum pump, can be switched on/off separately Nlsdpfx Aezux Imof Sog

Year of construction: 2009, condition: good (used), For Sale: Make: Kittner Type: Crate washing machine + dryer Automatic feed Included: - Crate washer + dryer - Electrical diagrams The crate washer is adjustable in height and width. Nodsznhwqepfx Af Sjlg Maximum crate dimensions: width x height 420 mm x 270 mm Overall machine dimensions: length x width x height 4000 mm x 1200 mm x 1640 mm It is possible to view this crate washer on site. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E Nlsdpfx Afszl T Sne Sjg -4 Stück Kernzüge -Drehtischsteuerung

Condition: like new (used), Year of construction: 2017, operating hours: 12,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Nlsdjv S E Dgopfx Af Seg Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm Nsdpoxdttpjfx Af Sslg - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, total length: 1,270 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 300 kg, feed length X-axis: 360 mm, feed length Y-axis: 320 mm, feed length Z-axis: 160 mm, spindle motor power: 1,500 W, product height (max.): 320 mm, type of input current: three-phase, warranty duration: 12 months, Special Offer – 5% Discount Available! Metal Slotting Machine B5016C – 160 mm Stroke The Metal Technics Polska B5016C Metal Slotting Machine is a professional industrial machine designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction, rotary worktable and precise ram movement ensure excellent machining accuracy, reliability and long service life. Nodpfx Afjyuc D Te Sslg The machine is particularly suitable for tool rooms, maintenance workshops and manufacturing facilities. With a 160 mm ram stroke, a 360° rotary table and a maximum slotting force of 4.5 kN, it offers outstanding versatility for precision machining applications. Main Features * 160 mm ram stroke * Heavy-duty industrial construction * Ø350 mm rotary table * 360° table rotation * Adjustable vertical ram position * Maximum slotting force: 4.5 kN * High machining accuracy * CE certified Technical Specifications * Model: B5016C * Maximum ram stroke: 160 mm * Stroke speeds: 23 / 32 / 44 / 48 / 67 / 92 strokes/min * Worktable diameter: 350 mm * Vertical ram adjustment: 160 mm * Distance from tool holder to column: 485 mm * Distance from table surface to ram body: 320 mm * Longitudinal table travel: 360 mm * Cross table travel: 320 mm * Table rotation: 360° * Maximum tool size: 25 × 40 mm * Maximum table load: 300 kg * Maximum slotting force: 4.5 kN * T-slot width: 14 mm * Main motor power: 1.5 kW * Machine dimensions: 1270 × 1100 × 1700 mm * Machine weight: 1400 kg Applications * Keyway machining * Internal splines * Internal grooves * Precision slotting * Tool rooms * Maintenance workshops * Metalworking * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, CE Declaration of Conformity, technical documentation and professional warranty and after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, Year of construction: 2024, TECHNICAL DATA -Maximum drilling depth: 145 mm -Maximum drilling length: 240 mm -Vertical adjustment: 135 mm -Dust extraction port diameter: 100 mm -Speed: 1500 / 3000 RPM -Color: RAL 7035 Light Gray, RAL 5000 Violet Blue -Net weight: approx. 200 kg Solid German engineering Professional slot milling and precise dowel drilling Fixed table, easily movable drilling motor Travel mechanism for increased mobility Cast iron table 700 x 380 mm, with thick walls and high ribbing Easily adjustable cross slide with adjustable ball guides for lateral and depth adjustment Nljdpfjfpa Rajx Af Sjg Vertical adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation adjustable via side stops on the left and right Drilling motor power: 1.3 kW / 1.8 hp or 1.7 kW / 2.3 hp, with pole reversing switch, speed 1500/3000 RPM with motor brake and practical tool storage Includes emergency stop button High-precision three-jaw chuck, clamping range 5 – 20 mm Dowel drilling device for series hole drilling with indexing roller, 16, 22, 25 and 32 mm, highly precise milled indexing, locking via spring-loaded indexing bolt Frame stop can be inserted with indexing bolt for the positions: center, left, right Miter stop can be inserted with indexing bolt for 45° and 22.5°, workpiece stop up to 1500 mm for series processing CE compliant GS tested

Condition: used, Year of construction: 2009, Folding machine MBO Navigator K800.2/6 S-KTL Year: 2009 Description: - 16 page folder - Pallet feeder: FP 120 - Pump: Year 2018 Folding unit MBO K800.2/6 S-KTL Nsdpexg Nlmefx Af Solg - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hoods for upper folding buckles - Excluding delivery Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Njdpfjzxcn Esx Af Sjlg Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, Nlodpfjzuykvox Af Sog can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Year of construction: 2020, condition: as good as new (ex-display), The TS-200K mortising machine is a device manufactured in Taiwan by EASTAR MACHINE TOOLS CORP., a leading company in the industry. The machine is characterized by its perfect level of workmanship; the body is made of cast iron, and all guides are made of high-strength steel. The machine body is machined on CNC machines, ensuring the geometry of the machine and high precision in fitting. The machine guides are protected by bellows, and the device is also equipped with a central lubrication system, which minimizes the operator's maintenance requirements. This makes the TS-200K mortising machine an exceptionally durable device that guarantees trouble-free operation for many years. The device is primarily used in tool rooms and maintenance workshops. Due to its ease of operation, the TS-200K mortising machine is ideal for both single-piece and series production. The machine has a CE certificate, and the operating manual is available in Polish. Main features: • Hardened and precisely ground beam guides ensure precise movement and high wear resistance. • 8 mortising speeds, allowing adjustment for different types of tools and mortising operations. Nljdpjy Uxf Uofx Af Seg • Central lubrication system ensuring lubrication of key machine components. • Ability to tilt the mortising head in the range of +/- 30°. Technical parameters Unit TS-200K Maximum ram stroke [mm] 200 Number of strokes per minute (50Hz) [1/min] L: 22, 26, 31, 39 H: 44, 52, 61, 78 Vertical adjusting travel of the beam [mm] 220 Beam tilting angle [°] +/- 30° Distance between the base of the beam and the surface of the work table (A) [mm] 300 Distance between the tool axis and the surface of the column (B) [mm] 355 Diameter of the work table [mm] 400 Longitudinal travel of the work table (X) [mm] 250 Transverse travel of the work table (Y) [mm] 250 Main motor power [kW] 1.5 Device weight [kg] 750 Device dimensions [mm] 1260x810x1730

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Nljdpfx Afszavyfj Seg

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Nlsdpfx Asu E Id Tjf Sog Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Condition: used, Technical Specifications - Working range of the X-axis: 3,260 mm - Working range of the Y-axis: 1,260 mm - Working range of the Z-axis: 165 mm - Machine design: Gantry - Tool magazine capacity: 16 positions - Power of the electric spindle: 19 kW Nlsdpozutq Asfx Af Seg - Total power consumption: 20 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 1,500 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 500 kg, Meyn D40 Chicken Thigh Deboning Machine We offer a professional industrial chicken thigh deboning machine from the renowned company Meyn – one of the leading manufacturers of technology for the poultry industry. This device is designed for use in poultry processing plants, ensuring high efficiency, process repeatability, and reduced raw material loss. The stainless steel construction allows easy maintenance and meets food industry standards. Njdsyiubyepfx Af Sslg Technical specifications: Manufacturer: Meyn Model: D40 Year of manufacture: 2008 Capacity: 2400 pcs/h Weight: 500 kg MEYN / BONE / CHICKEN / POULTRY / THIGH / DEBONER

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Nsdpfjvwfr Iex Af Solg

Condition: excellent (used), Automatic Pocket Machine . We have more models available .All machines have 6 months warranty .Worldwide delivery . Over 25 years of experience . Yamatex Nlodpfxsy H Sh Tj Af Ssg

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Nodpfx Afezkbirj Solg Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. Nsdpfx Aoz Dg H Hjf Solg With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg.