Used Butt Weld for sale (7,847)

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Ijdpfxowu Tu Do Adnoa Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: new, Year of construction: 2024, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. Ijdpfou Nf Nzsx Adnsa 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe, we have in Europe in 3 locations a sales and service organisation.

Condition: new, Year of construction: 2022, operating hours: 15 h, functionality: fully functional, total length: 4,500 mm, total width: 2,150 mm, total height: 2,800 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, emergency stop, type plate available, Machine FSW - 1 welding head - 1.6x1m working surface, gantry-type machine. This machine will weld the linear parts and/or 2D. Machine FSW - 1 welding head - 1.6 x 1m working surface, gantry-type machine, welds linear and/or 2D parts. Iodpfju Hi Nyex Adnea

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 760 mm, total width: 330 mm, total length: 540 mm, overall weight: 55 kg, product height (max.): 4 mm, laser power: 1,500 W, Intelligent welding process support Ijdpeqx Hnyofx Adnsa Give your welding process additional drive with intelligent functions. The Bodor Welding Process Database incorporates welding parameters for steel from 1 to 4 mm in terms of flat welds and fillet welds. Working as a beginner’s guide, it allows users with different levels of expertise to weld effortlessly. Smart control knob The control knob is easy to navigate. Users are able to manage their welding solutions in one setting. They can select welding process and adjust welding parameters (e.g. power, weld bead width, frequency, etc) , and the knob will automatically store customized parameters for their operations in the future. Portable design, integrated power structure Without built-in water tanks or cooling fans, BodorWelder 1500 takes up a covering area of 0.24㎡. This compact machine aims to help users with complex welding jobs in diverse working scenarios. It also comes with a set of Bodor welding nozzles, fulfilling all kinds of requirements.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) Ijdpfsv Edlvjx Adnja - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: new, We are a Lorch Cobot partner and will be happy to advise you on all aspects of automation. Set us tasks, bring your components to a joint appointment and we will plan an automation for you. Ijdjguqnzspfx Adnoa The all-inclusive package for the automation of small and medium series. With the Lorch Cobot Welding Package, you don't just get a cobot - you get everything you need to make your team stronger: Ennobled by our innovative welding technology, paired with our intuitive operating software and thanks to our service offerings, the Lorch Cobot Welding Package is the all-inclusive package for medium-sized welding automation.

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Iodpswu Dcxefx Adnsa Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: used, Year of construction: 2014, with front mower Disco 3200 FC / Ijdpfxjtlry So Adnoa

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Iodpfx Adoud Rl Ujnsa

Condition: used, Dalex spot welding machine type SL 16-1, 400 Volt, 16 kVA Ijdjxz R Tbepfx Adnja

Condition: used, filter area: 40 m², suction capacity: 4,000 m³/h, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Iedpfexz Dy Ujx Adnsa

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Isdpfx Aoxz Av Iodnea Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, & tested Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Technical data: see image Isdpfx Aoxz Amyjdnoa

Condition: ready for operation (used), Year of construction: 2022, Table Table load 12.5 kg Media Chip conveyor Yes Additional Equipment operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Application Types Welding Iedpfx Ajxzvuqednsa

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) Isdjxf Uw Sjpfx Adnoa 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: good (used), Year of construction: 2017, Dimensions: Length 825 mm, Width 810 mm, Height 1150 mm Weight: 122 kg Extraction power: 1100 m³/h Filter cleaning: 42 m KEMPER MaxiFil, 3 m arm, hose configuration High filter capacity Safe filter change Application: Also suitable for chrome-nickel steel Medium amounts of fume/dust Regular use Features: Start/stop automatic (optional) Workspace lighting (optional) Extraction arm up to 4 m Rotatable extraction hood Benefits: Safe operation due to phase sequence detection Less need for repositioning the extraction arm thanks to the hood's design We have 3 units in stock with extraction arms of 2, 3, and 4 meters Iodpfsxzu Ngjx Adnja

Condition: used, Year of construction: 2012, operating hours: 3,745 h, type of input current: three-phase, filter area: 20 m², suction capacity: 4,600 m³/h, negative pressure: 2,800 Pa, Dust extraction unit, welding fume extractor, pneumatic vacuum filter unit and absorber by ULMATEC, designed for plasma cutting, laser cutting, sandblasting, welding dust and fumes, as well as all types of dry dust. Cartridge filter elements cleaned by compressed air. The fan is positioned behind the filter on the clean-air side, minimizing the risk of explosion. Model: IEP 20-2-2 Fan power: 2.2 kW Max airflow: 4600 m³/h Max vacuum: 2800 Pa Number of filter cartridges: 2 Filtration area: 20 m² Inlet diameter: 180 mm Year of manufacture: 2012 Operating hours: 3745 h Inventory number: 1083 Ijdexz Dr Repfx Adnja

Condition: used, Year of construction: 2017, workpiece dia. . mm material: rust free/heat resistant steel . Iedjxzu Agspfx Adnoa welding process: 15-20 bolts /min at . mm weight of the machine ca. 120 kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 430 A, welding current at 100% duty cycle: 360 A, welding current (max.): 500 A, For sale: Kolarc XM500 500A 40% ED 430A 60% ED 360A 100% ED 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and 10 Meter interconnection hose. Test welding is possible. A video of the machine in welding condition is possible. Isdpexzilijfx Adnsa We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Iodpfsxzlvqsx Adnoa Media Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Application Types Welding

Condition: good (used), Reflective light barrier, reflective light sensor, reflective sensor, light sensor, fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, contrast sensor, contrast sensor, sensor reflective light sensor -Manufacturer: ifm, contrast switch contrast sensor -Type: O5K500 Iodpfoxzd Dmjx Adnsa -Dimensions: 70/45/18 mm -Weight: 0.1 kg

Condition: used, Year of construction: 2013, type of input current: three-phase, filter area: 84 m², suction capacity: 3,000 m³/h, negative pressure: 2,900 Pa, Donaldson Torit brand welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high equipment efficiency. Brand: Donaldson Torit Model: 2DFP4-SPRK Year of manufacture: 2013 Fan motor power: 4 kW Capacity: 3000 m³/h Vacuum: 2900 Pa Iodpfxoxz A A Is Adnea Filtration surface: 84 m² Inlet diameter: 250 mm Equipped with "SparkTrap" spark arrestor system Dimensions: Width: 2.00 m x 1.25 m Height with pallet: 2.30 m Stock number: 1082

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 250 A, For sale: Lascentrum Multimig 250-3 Dual Pulse 250 AMP 400 Volt Gas-cooled Pulse Double Pulse Synergic 2/4 Step 4 Roller drive Steplesly adjustable Program memory Iodpfexziinsx Adnea Burnbacktime adjustable Stick option Steel, Inox, and Aluminum weldable Refurbished and tested Including SB360 Mig welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2021, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. Designed for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with dust-free collection. The mobile KEMPER MaxiFil Clean cartridge filter is intended for continuous operation and is suitable for filtration of welding fumes and high-concentration dusts. Suitable for use in all welding methods of carbon steel, low-alloy and high-alloy steels, as well as aluminum. Economical to operate thanks to the long service life of the filter cartridge. With IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Comes complete with a Start-Stop system for automatic switching of the unit on and off. Specifications: - Airflow: 1,100 m³/h - Maximum vacuum: 3,200 Pa - Three-phase fan, 1.5 kW - Filter surface area: 15 m² - Year of manufacture: 2021 - Cartridge filter element with PTFE membrane - Filtration efficiency: >99.97% - Built-in delay timer in start-stop mode. - When connected to a start-stop sensor (optional), the extraction delay time after welding can be set from 5 to 60 seconds. Isdpfx Adetq E Sienja - The unit is in very good condition. Stock no.: 0976

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, welding current (min.): 50 A, welding current (max.): 300 A, For sale: Iodsxzigmopfx Adnoa DAIHEN Varmig 301-i LCD Pulse 50-300 AMP 400 Volt Synergic Pulse Double Pulse Pulse Frequency Gas-cooled 2/4 Step 4 Roller drive Post gas Soft start Elektrode option Steel, Stainless Steel, and Aluminum weldable New Including SB250-3 Meter MIG/MAG Welding torch, earht work lead with clamp, gas cable, pressure regulator, 0,8-1,0-1,2mm Steel + Stainless and 1,0-1,2mm ALU Wire feed rolls, and 12 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.