Used Brochures for sale (249)

Year of construction: 1997, condition: used, Spiral binding machine for books, brochures, notepads, etc. The machine processes both nylon-coated and galvanized wire. Wire diameter: 0.7-1.2 mm IMPORTANT NOTE!!! THE MACHINE WILL NOT BE AVAILABLE UNTIL CALENDAR WEEK 50/2026. Dodpfx Asz A Ddajl Aewc

Year of construction: 2016, condition: used, KK PULLTESTER KKP03A / series 6 The KK pulltester is a measuring device for quality assurance in the graphic industry. It measures, with extremely high precision the bonding-adhesion of individual pages of cataloges, paperback books, journals, brochures and books. The number of pages to be measured, page numbers, order number and book block length are programmed before the measurements are taken. Technical specifications: Language: english Dedswcd Iqspfx Al Aewc book block format width: approx. 5 - 35 cm book block format length: approx. 7 - 40 cm book block format thickness: approx. 7 cm

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction Dwodpfxjyibg Te Al Asc The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, saw blade diameter: 500 mm, overall weight: 600 kg, No. 04547 Under-table crosscut saw Paul 15 AOM Used Saw blade diameter max. 500 mm Main saw motor power 4.4 kW Max. cutting height approx. 150 mm Max. cutting width approx. 875 mm Max. cutting width at 150 mm cutting height approx. 720 mm (with Ø 500 mm saw blade) Hydraulic saw feed Lifting force 2500 N Up to 25 cuts per minute Two-hand operation Hydraulic power unit Dedpjz Eu Ubefx Al Ajwc Dust extraction connections Incl. 2 roller conveyors (approx. 2900 x 700 mm and approx. 1550 x 700 mm) Transport dimensions machine approx. 1200 x 1200 x 1400 mm LWH, roller conveyors approx. 3000 x 1200 x 800 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Dwodpfx Aju S An Del Aec A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Dwodpjylb Ixsfx Al Asc Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, total length: 4,000 mm, total width: 1,200 mm, total height: 1,750 mm, overall weight: 1,000 kg, power: 7.3 kW (9.93 HP), No. 04539 Profile sanding machine / automatic edge processing machine Rehnen KBA Used, year of construction 2021, low operating hours Profile sanding machine / automatic edge processing machine for sanding edges, routing profiles and sanding profiles in through-feed operation Materials to be processed: solid wood, chipboard and MDF Fields of application: stair construction, furniture production, shopfitting, interior finishing, etc. Material thickness up to approx. 90 mm, centrally adjustable by handwheel Variable feed speed up to 6 m/min Total power 7.3 kW Pneumatically controlled and tracing profile sanding shoes with standard sanding belts Longer belt life due to long sanding belts and pneumatically height-adjustable oscillation High material removal thanks to calibrating roller - Continuously adjustable oscillating sanding unit (between 30 - 130 mm) / sanding and fine sanding via contact roller and sanding shoe / sanding belt size edge 2000 x 150 mm - 2 routing units with profile cutters 50 x 10 x 16 mm, Z4 / routing of radii, profiles and chamfers on top and bottom at 12000 rpm / controlled via frequency inverter - 2 profile sanding units for profile sanding with endless sanding belts via application-controlled, air-cooled steel profile sanding shoe / sanding belt size profile 30 x 1960 mm - Extendable roller conveyor at the front - Extraction connection diameter 160 mm - Workpiece feed via chain plate conveyor Transport dimensions approx. 4000 x 1200 x 1750 mm LWH Weight approx. 1000 kg Dwjdpfx Alozhbzcj Ajc To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: like new (used), Year of construction: 1997, AMADA MODEL ITS2 103 100 TONS X 3000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 5 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1997 stock no. 01853 Dsdpfx Ajh H Duhol Aswc description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 100 TONS BENDING LENGTH 3000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 5 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE MACHINE HEIGHT 2340 MOTOR POWER 9 KW can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Special options: Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Dwjdjzz Sikspfx Al Asc Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface KEBA 2985 control system 2 additional sockets: 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: used, functionality: fully functional, Automatic brochure binding machine complete with: - Cover feeder - Hotmelt unit Dwsdpfx Aljyka R No Asc

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, overall weight: 600 kg, total width: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, Equipment: saw blade guard, Saw blade diameter: 350-800 mm Dedpfx Aljz A Th Ue Aewc Saw blade arbor: 30 mm Working height: 900 mm Cutting heights: see brochure Cutting widths: see brochure

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Dwodpfx Aozlr Uusl Aec Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible Dwedov N E Iyspfx Al Ajc To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Djdpsrdzg Hefx Al Aswc The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Condition: excellent (used), Year of construction: 2020, The Canon Arizona 1360 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: 2020 Mileage: 25.000m² only! Print head status: perfect Print area: 3,08x2,50 meters Roll option: not available Dodjylwhnopfx Al Ajwc In production, demo possible Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: Dwodpozz Sp Refx Al Asc 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Condition: used, power: 2.2 kW (2.99 HP), pivoting range: 45 °, total height: 2,250 mm, total length: 1,300 mm, total width: 850 mm, overall weight: 500 kg, No. 04532 Band saw Kölle BG 63 Used Wheel diameter 630 mm Motor power 2.2 kW Saw blade length 4340 - 4500 mm Table dimensions 680 x 645 mm LW Saw table tiltable 0° - 45° Upper saw blade guide with guide rollers Dust extraction connection Incl. 3 spare saw blades Incl. operating manual Transport dimensions on pallet approx. 1300 x 850 x 2250 mm LWH Weight approx. 500 kg Djdoz Eu Tdjpfx Al Aswc To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 7IMB, working width: 420 mm, warranty duration: 6 months, operating speed: 500 mm/s, Komfi ImiJET-BE70 Book Edge printing machine Book edge printing machine offers special look to your books with possibility of personalized data printing. Semi-automatic operation: manual feeding and unloading of books, the printing process is controlled automatically. Printing heads using oil-based inks are easy to clean with minimum risk of stuck nozzles. Variable data (multi-page PDF), variable resolution (180 x 360, 360 x 360, 720 x 360 dpi) and variable multi-pass printing possible. Different adapters for wire-o binding, so covers and hard covers, flat piles to get the best result. Options: Oil-based ink ready Manual feeding & unload Automatic print process Variable data & resolution Parameters: Production speed: 180 edges/hr Max. production speed: 30 m/min Paper weight 115-350 g/m2 Min. book dimensions: 100 x 100 x 5 mm Max. book dimensions: 420 x 420 x 70 mm Printing heads: 4x Konica Minolta Djdpeziidusfx Al Aowc For customers who want to stand out from the competition and offer unique printed products. Soft cover books, hard cover books, colored brochures, wire-o products, notepads, note blocks, business cards. Economical run due to less expensive consumables and low risk of stuck printing heads. High quality components used to guarantee reliable and low service production.

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Dwsdpfjwhp H Njx Al Aec Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2022, The EFI VUTEk h5 is a premium, high-volume 3.2-meter superwide hybrid production printer reengineered from the ground up to offer extreme efficiency, unmatched versatility, and maximum throughput The EFI VUTEk h5 platform acts as a true industrial hybrid, effortlessly transforming from a high-speed rigid flatbed press to a heavy-duty roll-to-roll media system. By combining premium imaging with an elite automation framework, it allows print shops to dramatically lower delivery times and process up to 109 boards per hour Configuration: 8 colors + w Productivity: 109 boards per hour Dwedpfxoxanwzo Al Ajc Under production. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.

Condition: good (used), overall weight: 160 kg, The BookMaster brochure-making machine and the TrimMaster front cutter combine maximum performance with cost-effectiveness. They are easy to operate and require minimal maintenance, making them the most advanced, user-friendly, and reliable saddle-stitch brochure-making machines on the market. The BookMaster features a unique stitching mechanism that ensures virtually maintenance-free operation. The most important wear parts are contained in the stitching head cassette and are replaced every 5,000 cycles during cassette changes. This allows for over one million cycles before servicing of the stitching head is required. The BookMaster has a manual adjustment feature for adapting page margins, end sheets, and stitching/folding positions. The TrimMaster cutting unit has a single, self-sharpening blade made of hardened steel for clean trimming of the book's front edge. All cutting waste is transported outside the machine to an external waste container, which allows for continuous operation. The finished brochures are transported to a high-performance discharge conveyor. Additional information: Max sheet format: 482 x 320 mm Min sheet format: 210 x 140 mm Max brochure thickness: 22 sheets Max cutting length: 25 mm Dwodpfxoy Idr He Al Ajc 230 volts. Shipping possible, pickup possible, test run possible. Operating manual is also included.

Condition: good (used), Professional spine gluing machine for books, brochures, and paper blocks Sturdy German-made gluing machine, used in bookbinding and printing industries. It allows for manual spine gluing—ideal for short-run production, bindery workshops, and print shops. Features: • Manufacturer: Tünkers Maschinenbau GmbH • Model: 20118490 • Application: spine gluing of books / blocks / brochures • Manual operation – levers, clamps Djdpfju A I Rhox Al Aewc • Durable steel construction • Worktable with guides • Adjustable pressure and gluing position Condition: used, very good The machine is complete and fully functional. Standard signs of use are visible.

Condition: used, Year of construction: 2006, No. 10034 2 pieces stationary single shaft shredder Doppstadt DW 2560 E1 Stationary single-shaft shredder Doppstadt DW 2560 E1 (1 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.) Since overhaul approx. 600 operating hours Motor electric Approx. 20000 operating hours The scope of delivery does not include a conveyor belt Including replacement gearbox Filling width 1900 mm / Filling length 3060 mm Motor: Manufacturer T-T Electric / Type DC motor LAK 4250 C / Power 315 kW / Rated speed 2000 rpm / Armature voltage 460 V / Armature current 721 A / Field voltage 340 V / Field current 14.8 A / Degree of protection IP 55 / Cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Stationary single-shaft shredder Doppstadt DW 2560 E1 (2 of 2) Used, year of construction 2006 (overhauled by the manufacturer in 2024: new shaft / new gearbox / new bearings / etc.), fire damage December 2025 (drum condition good, gearbox condition good, motor condition unclear, control unit condition burnt down, hydraulic unit condition burnt down) Since overhaul approx. 200 operating hours Motor elektric Approx. 23000 operating hours The scope of delivery includes a conveyor belt The machine was used for bulky waste and wood Filling width 1900 mm / filling length 3060 mm Motor: Manufacturer T-T Electric / type DC motor LAK 4250 C / power 315 kW / rated speed 2000 rpm / armature voltage 460 V / armature current 721 A / field voltage 340 V / field current 14.8 A / degree of protection IP 55 / cooling 2 separate motors Hydraulic unit: Manufacturer OC-Hydraulik Doppstadt / power 7.5 kW / rated voltage 380 V Cutting unit: drum / length 2500 mm / diameter 600 mm / speed 31 rpm Throughput: shredded material up to 40 t/h Longitudinal belt: length 7800 mm / width 1000 mm / discharge height 1680 mm / speed 1.8 m/s Dwsdpfx Aoym Edtel Ajc Transport dimensions approx. 8000 (7850) x 4700 (3450) x 5380 mm LWH Weight approx. 25665 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, overall weight: 3,200 kg, This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details. Machine Benefits Technical Machine Benefits Dsdpfxsyi Eine Al Aewc • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7000 rpm • Max. Back-spindle power: 2 kw • Gang rotary tool: 5 fixed tools • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll • Equipment: chip conveyor.

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, controller manufacturer: CINCOM, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Dsdpfxoyi Eh Re Al Aowc Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw • Gang rotary tool: 5 fixed tools - 4 driven tools • Turret tools: 10 positions • Bar feeder: lemca boss 332 e/r type 37ll - year 2005 • Equipment: chip conveyor