Used Brochures for sale (249)

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Motor power 5.5 kW Nominal speed 2880 rpm Gsdpsyl Nc Dofx Ahveip Automatic or manual operation Approved for installation in workrooms Residual dust content level H3, 0.1 mg/m3 Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 3150 Pallet manufacturing machine / line for the production of Euro pallets Bohm & Kruse / Goege / Engeler Used, still connected and ready for demonstration Consists of: Block stacker (Goege company) Skid machine (Bohm & Kruse company) Skid turner / deck stacker (Goege company / Engeler company) Main nailing machine (Bohm & Kruse company / Terwort company) Skid milling machine (Goege company / Engeler company) Block burning machine (own construction) Pallet stacker (Engeler company / Terwort company) Outfeed conveyor (Terwort company) Sold on behalf of the customer, ex site, without dismantling, transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible Gsdjtuxpuepfx Ahvjip To avoid possible misunderstandings, an inspection on site is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as inspected” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2016, The Océ Arizona 2280 XT is an 8-channel UV flatbed printer with Océ VariaDot grayscale imaging technology, a maximum printing area of 49.2" x 98.4" (1.25 m x 2.50 m) on rigid media, a maximum media thickness of 2" (50.8 mm), and a speed of up to 691 ft²/hr (64 m²/hr) in express mode. It offers flexible media printing via an optional Roll Media Option (RMO), supports white ink and varnish, and can print 2-point text in its High Definition mode. Mileage: 60.000m² Manufacturing Year: 2016 Roll to roll option included Colour configuration: CMYK Lc Lm 2W (possible to convert one channel to varnish) Location: Western Europe RIP onyx included In production, demo possible Key Specifications Model: Océ Arizona 2280 XT Ink System: 8-channel piezoelectric inkjet system using Océ VariaDot grayscale imaging technology Ink Technology: 6 to 42 picoliter droplets with two printheads per color Printing Modes: Near-photographic, High Definition, Production, and Quality modes Rigid Media Size: 49.2" x 98.4" (1.25 m x 2.50 m) Maximum Media Thickness: 2" (50.8 mm) Optional Roll Media Option (RMO): Available for flexible media printing Gijdpoyly Idefx Ahvop Print Speeds (Express Mode): Up to 691 ft²/hr (64 m²/hr) Ink Options: Standard CMYK, Light Cyan, Light Magenta, White UV ink, and Clear Varnish Text Quality: Legible text as small as 2 pt. in High Definition mode Imaging Technology: Océ VariaDot grayscale imaging, enabling variable ink droplet sizes For further technical information please refer to enclosed brochure

Condition: excellent (used), Year of construction: 2020, The Canon Arizona 1360 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: 2020 Giodpfx Ahoylwhnsvop Mileage: 25.000m² only! Print head status: perfect Print area: 3,08x2,50 meters Roll option: not available In production, demo possible Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure Gedpfsu Agh Sex Ahveip 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 1,300 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,200 rpm, total length: 3,500 mm, total width: 2,300 mm, total height: 1,700 mm, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, No. 04509 Sliding table saw Casolin ASTRA 400 / NEW New, year of construction 2025 Manufacturer warranty on mechanical parts until 11.11.2026 Manufacturer warranty on electrical parts until 11.05.2026 Sliding table length 3200 mm, width 360 mm, with 2 rollers, anodized aluminium Cutting width 1300 mm Saw blade diameter 300 - 400 mm Saw spindle diameter 30 mm Saw motor 5.5 kW with motor brake Scoring blade diameter 120 mm Scoring spindle diameter 20 mm Scoring unit speed 8200 rpm Scoring unit 0,55 kW Cutting height (saw blade diameter 400 mm) 125 mm Cutting height (saw blade diameter 400 mm, cutting angle 45°) 88 mm Electric height adjustment & electric angle adjustment Electric height adjustment and alignment of the scoring unit Speed 3200 / 4200 / 5000 rpm Digital display for speed Digital display for cutting angle 0° - 45.5° with automatic return to 0° Pivoting overhead saw guard Manual telescopic fence with 2 tiltable stops Cross table with telescopic fence +- 49° pivotable/tiltable Automatic star-delta starter Main emergency stop switch 400 V - three-phase current - 50 Hz Machine CE-compliant Incl. used saw blade, diameter 315 mm Incl. technical documentation Transport dimensions approx. 3500 x 2300 x 1700 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Giedpoylp Dnefx Ahvep Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, power: 5.5 kW (7.48 HP), cutting height (max.): 500 mm, cutting width (max.): 780 mm, total height: 2,650 mm, total length: 1,550 mm, total width: 950 mm, overall weight: 750 kg, Equipment: motor brake, No. 04522 Bandsaw HEMA UH 800 Used Roller diameter 800 mm Cutting speed 1650 m/min Motor power 5.5 kW Automatic motor brake Saw blade length 5450 - 5600 mm Table size 1200 x 900 mm LW Cutting width with fence 780 mm Maximum cutting height 500 mm Table can be tilted on both sides -45° to +45° As good as new HEMA band guide rollers Including various saw blades Transport dimensions approx. 1550 x 950 x 2650 mm LWH Weight approx. 750 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Gisdpfoylpd Iex Ahvjp Terms of delivery: ex warehouse

Condition: used, Year of construction: 2011, operating hours: 744 h, overall weight: 1,500 kg, fuel: electricity, No. 04437 Chipper / Shredder Balduf PZ 63-1 Used, year of manufacture 2011, only 744 operating hours Made in Germany For various materials, e.g. wood, plastic, etc. Hopper opening 800 x 630 mm Electrical connection 400 V / 19.25 kW Rotor diameter 260 mm Rotor width 630 mm Giedpfxouxbccj Ahvsp 30 interchangeable blades 30 x 30 x 15 (15 standard, 15 concave) Sieve diameter 30 mm SPS Siemens S 7 200 control system Automatic & manual operation possible Hydraulic operating pressure 160 bar Suction nozzle diameter 160 mm Including technical documentation Transport dimensions approx. 1800 x 1250 x 1800 mm LWH Weight 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg Gisdpsylb Ixjfx Ahvop To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, functionality: fully functional, overall weight: 438 kg, The Dana Spicer 24000 series Powershift transmission is a rugged, hydrodynamic transmission designed for off-highway use, intended for heavy duty industrial, mining and construction machinery. It is designed for engines with a power range of 97–120 kW (130–160 hp). MHR model: An integrated unit that is installed separately from the engine (remote mount). Gsdpfx Ajv Eaqbshvsip Spicer Powershift Transmission series 24000 Model 3019FMHR24341-110 MHR MODEL The MHR Series is an integral transmission and converter assembly mounted remotely from the engine. This assembly minimizes external piping. This 3-speed powershift transmission is designed to handle heavy-duty applications, including lift trucks, rough terrain lift trucks, front-end loaders, rough terrain cranes, and other mining, construction, and industrial machinery. Maximum speed: 3100 RPM. Turbine stall torque: 980 Nm (industrial) / 1115 Nm (utility) Forklifts and rough terrain reachers. Wheel loaders (Front-end loaders). Vehicle cranes (Rough terrain cranes). Mining and construction machinery such as underground mining vehicles. Input Power kW 97 to 120 Input Maximum (RPM): 3100 Turbine Stall Nm 980 Nm industrial / 1115 Nm Utility PDF brochure Service manual EN Shipping weight: 438 kg 1 piece in stock

Condition: used, No. 3203 Milling tool Leitz, Oppold Used Consisting of: 2x Leitz milling cutters, 1 of them unused 4x milling disks green 6x Oppold profile cutters - 2 x Leitz milling cutters, 1 of them unused Inner Ø 60 mm, outer Ø 170 mm, height 40 mm - 4 x milling disks green Inner Ø 35 mm, outer Ø 90 - 120 mm, height approx. 25 mm - 6 x Oppold profile cutters inner Ø 30 mm, outer Ø 120 mm, height 25 mm Sale on behalf of the customer, from location near 73430 Aalen Shipping by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Godpfxov Dutnj Ahvjip Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1990, total width: 1,500 mm, total length: 3,150 mm, total height: 2,100 mm, overall weight: 5,000 kg, pressing force: 135 t, opening width: 400 mm, operating pressure: 340 bar, power: 22 kW (29.91 HP), cylinder diameter: 90 mm, transport width: 1,500 mm, space requirement width: 1,500 mm, space requirement length: 3,150 mm, transport height: 2,100 mm, transport length: 3,150 mm, space requirement height: 2,100 mm, pressure: 340 bar, working width: 1,350 mm, empty load weight: 5,000 kg, plate width: 1,350 mm, table width: 1,350 mm, table length: 2,550 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Giodpsykt H Rsfx Ahvsp Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, 1x Hohner Stitching Head 43/6S, used The Hohner 43/6S is a high-quality, narrow stitching head designed for professional saddle-stitching of booklets and other printed products. This used stitching head offers reliable performance and precise stitching. Key features: - Versatile: Suitable for making booklets, brochures, and other products that need strong stitching - Compatible: Can be used in stitchers from different makers like Horizon, Duplo, or Bourg - Flexible: Works well with different paper sizes and weights - Easy to use: Can be adjusted without tools for quick setup - Precise stitching: Delivers clean and even stitching of high quality - Wire thickness: Works with wire from 0.4 to 0.6 mm thick, good for many types of jobs - The "S" in the model name means "slim", showing it has a compact design Godpfxow Ewyxo Ahveip Technical specs: - Staples: Uses standard staples - Maximum stitching thickness: Up to 5 mm - Paper weight: Can handle paper from 60 to 300 g/m² - Size: Compact design to fit easily into existing systems All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, 1 Used Hohner Stitching Head 43/6S Gjdpfx Ahow Ew Agevoip The Hohner 43/6S is a high-quality, narrow stitching head designed for professional saddle-stitching of booklets and other printed products. This used stitching head offers reliable performance and precise stitching. Key features: - Versatile: Suitable for making booklets, brochures, and other products that need strong stitching - Compatible: Can be used in stitchers from different makers like Horizon, Duplo, or Bourg - Flexible: Works well with different paper sizes and weights - Easy to use: Can be adjusted without tools for quick setup - Precise stitching: Delivers clean and even stitching of high quality - Wire thickness: Works with wire from 0.4 to 0.6 mm thick, good for many types of jobs - The "S" in the model name means "slim", showing it has a compact design Technical specs: - Staples: Uses standard staples - Maximum stitching thickness: Up to 5 mm - Paper weight: Can handle paper from 60 to 300 g/m² - Size: Compact design to fit easily into existing systems

Condition: used, 2 Hohner Stitching Heads 43/6, used The Hohner stitching heads 43/6 are high-quality stitching heads designed for professional wire saddle stitching of brochures and other printed products. These used stitching heads offer reliable performance and precision in stitching. Special features: Godpfou Sz Ivex Ahvjip - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring stable stitching - Compatibility: Can be used in saddle stitchers from various manufacturers such as Horizon, Duplo, or Bourg - Flexible application: Ideal for processing different paper formats and weights - Easy handling: Quick adaptation to various stitching requirements - Precise stitching: Ensures clean and uniform stitching with high quality - Wire thickness: Compatible with round wire - Robust construction: Designed for industrial use Technical specifications: - Wire: 26-28 - Maximum stitching thickness: Up to 6 mm - Minimum staple distance: 43 - 52 mm - Length of staple crown: 12 mm - Net weight: Approx. 1.5 kg per stitching head

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 887 h, load capacity: 225 kg, lifting height: 9,140 mm, platform length: 1,200 mm, platform width: 700 mm, overall weight: 5,025 kg, empty load weight: 4,800 kg, transport length: 4,200 mm, transport width: 1,220 mm, transport height: 2,120 mm, fuel type: electric, ground clearance: 100 mm, Good day, We hereby offer you, without obligation, a used articulated telescopic boom lift (telescopic work platform) on wheels manufactured by TEREX AERIALS, type TA30N Boom Lift. The following technical data has been taken from the manufacturer’s operating manual and brochures; we cannot guarantee its accuracy or completeness. Manufacturer: TEREX AERIALS Model: TA30N Boom Lift Year of manufacture: 1999 Operating hours: 887 hours Transport dimensions (retracted): 4.20 x 1.22 x 2.12 m (L x W x H) Unladen weight: 4,800 kg Maximum platform height: 9.14 m Maximum working height: 11.14 m Maximum outreach: 5.20 m Turning radius (outside): 3.50 m Maximum gradeability: 20% Maximum driving speed (boom retracted): 4 km/h Maximum driving speed (boom extended): 0.75 km/h Safe working load (2 persons): 225 kg Maximum noise level: 70 dB at 3 m Operating temperature range: -5°C to 40°C Note: This machine was used sporadically in a distribution warehouse for electrical installations, assembly, disassembly, and maintenance work, exclusively indoors in a warehouse environment. The articulated telescopic boom lift is in good condition and can be inspected and tested under power. Godpeymnz Iefx Ahvsip We would be pleased if this machine is of interest to you. Your Service Team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: Gsdpfx Asymmtcjhvsip The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, Giodsymmmpspfx Ahvsp We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2017, Bacciottini Butterfly E2F Folding Machine – High-Precision Automatic Folding Module Available: Bacciottini Butterfly E2F, an automatic folding module designed for in-line operation with Bacciottini creasers. Ideal for digital production and high-quality jobs with rapid format changeovers. The Butterfly E2F delivers precise folds after the creasing process, ensuring professional finishes for covers, brochures (tri-folds, bi-folds), and specialty applications. Key features: - High-precision automatic folding system - Direct integration with Bacciottini creasers (modular line) - Fast setup via touchscreen control - Automatic format adjustment - High stability and production consistency - Quick job changeover Typical applications: Gjdpfoymmdzex Ahvsip - Covers with flaps - Folded brochures (bi-folds / tri-folds) - Covers for wire-o or perfect binding - On-demand digital production Advantages: - Time savings on setup - Higher productivity compared to manual folding - Perfect alignment following the creasing process - Ideal for digital printshops and finishing centers The Butterfly E2F is a compact, robust solution engineered for professional production environments that demand precision, speed, and flexibility.

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a complete, used baler line comprising a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baler, type 2040, with wire tying stations and bale chute. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we accept no liability. Baler Giedpfx Ahsymldtevep Manufacturer: BOA Type: 2040.S.4V (6) 71.30 Year of manufacture: 2002 Operating hours: approx. 66,568 (as of October 2025) Actual pump run time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Feed hopper dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Machine weight (press): approx. 26 t Note: The machine was used at a recycling facility for compacting paper, cardboard, foils, and PET bottles. The press is in good condition and can still be inspected under power, but without material throughput. We would be pleased if this complete baler line is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Professional spine gluing machine for books, brochures, and paper blocks Sturdy German-made gluing machine, used in bookbinding and printing industries. It allows for manual spine gluing—ideal for short-run production, bindery workshops, and print shops. Features: • Manufacturer: Tünkers Maschinenbau GmbH • Model: 20118490 • Application: spine gluing of books / blocks / brochures • Manual operation – levers, clamps • Durable steel construction • Worktable with guides • Adjustable pressure and gluing position Condition: used, very good The machine is complete and fully functional. Standard signs of use are visible. Gijdpfxeu A I Rho Ahvsp

Condition: used, Year of construction: 2024, operating hours: 49 h, Rampicar ROTAIR R70AE Tracked Dumper Tool Carrier, Year 2024, approx. 49 operating hours, as new Giodpoymgntofx Ahvop Description: * Maximum undercarriage load capacity 800kg * Honda GX390 petrol engine with electric start * Mono joystick for drive control * Hydrostatic drive system * Separate drive motors for each side * Undercarriage with centrally mounted oscillating rollers * Mechanical emergency brake * Tipping skip with self-loading shovel * 1 free hydraulic circuit with control lever * Various attachments can be fitted optionally; see Rotair manufacturer’s brochure (link) Despite our utmost care, errors in this listing cannot be completely excluded. Subject to errors and prior sale!

Condition: new, Good day, We hereby offer you, without obligation, a remaining stock of new, unused, original packaged sealing elements for occupied cable ducts (conduit pipes) from the manufacturer Formosa Supply Services Co. Ltd. Note: The above-mentioned technical data was taken from the operating manual, manufacturer’s brochures or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1000 pieces of new sealing elements for occupied cable ducts, packed in units of 10 pieces per carton (27 x 26 x 4.5 cm) including a small plastic bottle of lubricant and installation instructions. Application area and condition: The small inflatable cushions are used for fixing and sealing cables with diameters of 0–32 mm in cable ducts (conduit pipes); please see the PDF description for more details. This is a remaining warehouse stock of new, unused, original packaged sealing elements. Gjdpoymdg Hjfx Ahvoip We would be pleased if these items are of interest to you. Your Mertens & Frowein GmbH Service Team

Condition: used, 2 Hohner Stitching Heads 43/6, used The Hohner stitching heads 43/6 are high-quality stitching heads designed for professional wire saddle stitching of brochures and other printed products. These used stitching heads offer reliable performance and precision in stitching. Special features: - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring stable stitching - Compatibility: Can be used in saddle stitchers from various manufacturers such as Horizon, Duplo, or Bourg - Flexible application: Ideal for processing different paper formats and weights - Easy handling: Quick adaptation to various stitching requirements - Precise stitching: Ensures clean and uniform stitching with high quality - Wire thickness: Compatible with round wire Gijdpfx Ahjxwlxqovep - Robust construction: Designed for industrial use Technical specifications: - Wire: 26-28 - Maximum stitching thickness: Up to 6 mm - Minimum staple distance: 43 - 52 mm - Length of staple crown: 12 mm - Net weight: Approx. 1.5 kg per stitching head

Condition: used, Year of construction: 1990, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, grinding belt length: 7,800 mm, total height: 1,700 mm, total length: 4,100 mm, total width: 1,900 mm, overall weight: 800 kg, extraction connection diameter: 180 mm, space requirement height: 1,700 mm, space requirement length: 4,100 mm, space requirement width: 1,900 mm, table length: 2,800 mm, table width: 950 mm, transport length: 4,100 mm, transport width: 1,900 mm, transport height: 1,700 mm, No. 3251 Long belt sander Johannsen T 85 / PNEUMA Used, year of construction 1990 Table dimensions 2800 x 950 mm LW Sanding belt dimensions 7800 x 150 mm LW Passage under belt 340 mm The sanding table rests on ball-bearing prismatic rollers The table height is adjusted by motor Pneumatically controlled pressure shoe unit, the pressure can be adjusted depending on the material 2 sanding pads Dust extraction system, blower motor 1.1 kW Suction nozzle diameter 180 mm Belt blow-out nozzle for cleaning the sanding belt Motor power 5.5 kW Left crank 550 x 310 Gijdpfx Ahsyifilevsp The machine can also be used as a brushing machine if a brushing head with a diameter of up to 290 mm is mounted on the left-hand belt drive side Transport dimensions approx. 4100 x 1900 x 1700 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location