Used Brandt Ktd 51 for sale (93)

Year of construction: 1988, condition: used, - working length max. (mm): 3100 - profile height max. (mm): 200 Nedpfx Ajkx Hpaeh Hjwb

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Nedpfx Ahsx Dzw Ne Hswb Price: 15,000.-

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Nedpfxsxya Rtj Ah Hjwb Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Njdpfx Ahjxw Tuge Howb Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Njdpfx Aexw Ttvsh Hswb Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Nsdpfx Asxw Tngoh Hswb Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0 - 251 - 20 - 4507, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Nwedpoxzp Uwjfx Ah Hsb

Condition: used, Year of construction: 1988, - with lateral crosscut saw Nwedpfx Ahsbaz E As Hob

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying Nedpfxet Hxxpo Ah Hswb pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm feed rate max 14m/min Machine well maintained in very good condition

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Nwjdpjwkbd Ejfx Ah Heb Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Nwsdpfjw S E Rqjx Ah Heb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DETAILED PHOTOS AND VIDEO AVAILABLE ON DRIVE, PLEASE CONTACT ME VIA SMS TO RECEIVE THEM. PLEASE DO NOT MESSAGE VIA OLX, ONLY CALL OR EMAIL. TECHNICAL SPECIFICATIONS: Manufacturer: BRANDT Model: KDF 650 Year of manufacture: 2011 Condition: Used, in very good condition Edge band thickness: 0.4-3 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Maximum edge height: 60 mm Maximum power consumption: 21 kW Machine dimensions: height 2300 mm, depth 1550 mm, length 5800 mm Weight: 2600 kg Power supply: 230V/400V EQUIPMENT: - Electrically operated infeed fence - Rare, automatic edge feeding system - Pre-milling unit - Glue application unit - Pressure roller unit - End trimming unit (straight and angled) - Top/bottom trimming unit - Corner rounding unit - Profile scraper - Flat scraper - Buffing unit - 3 units for spraying anti-adhesive fluids TECHNICAL CONDITION: - Machine is fully operational and currently in use - Regularly serviced by authorized service - Ready for immediate operation - Low operating hours Nwodpfx Ahexuu N Hs Hjb PRICE: 135,000 PLN net (negotiable), VAT invoice will be issued LOCATION: Bochnia, Poland TRANSPORT: Collection by the buyer

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Nwsdpfju E E D Dex Ah Hsb Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg 2nd additional glue tank included. With full Documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Nwodpfou N T Ewex Ah Hsb Available immediately.

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Nwedpfewwk Duex Ah Hob

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Njdpfeh U Nzpsx Ah Howb Including full documentation and CE. Very good condition, fully working!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Nwedpfjxhgk Aex Ah Hob Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Nsdpfx Ahow S Dmdo Hswb Was mounted on a Homag Edgeteq S-200, KDF 1130 FC (1100 kg). However, it will certainly also fit other machines, e.g. Brandt (may require slight modification). Length of U-profiles approx. 1130 mm Build height incl. rollers approx. 150 mm 4 robust steel swivel castors with grease nipples 2 brakes 2 leveling plates for height adjustment The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this seller".

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Nwedpfx Aexdy Sljh Hob

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Nedpoq A I Aasfx Ah Hewb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Nwedpfx Ahenzrt Aj Hjb Maximum panel thickness: 50 mm

Condition: reconditioned (used), Year of construction: 2017, RECONDITIONED SINGLE-SIDED EDGEBANDING MACHINE BRANDT Nwodephnzaspfx Ah Hsb MODEL:AMBITION 1650 FC Machine completely regenerated New dice , new rollers , regenerated aggregates , set of new tools glue pot regenerated and much more SUMMARY,EQUIPMENT: GLUING AGGREGATE 2 X 2,2 KW 200 HZ GLUING UNIT A12 CUTTING UNIT TRANSVERSE CHAMFER/STRAIGHT 2 X 0.35 KW MILLING UNIT 2 X 0.55 KW COUNTER-ROTATING FORMING UNIT 2 X 0,35 KW WD 60 PROFILE SCRAPER WITH QUICK-CHANGE HEADS FREE SPACE GLUE JOINT SCRAPER POLISHER - Feed speed ¦ 8 - 18 m/min - Max. feed rate with shaping knife ¦ 11 m/min - Max. feed rate with shaping knife In conjunction with VKNR 4839 ¦ 14 m/min - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Overall length ¦ 5,760 mm

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Nodpfjwwtpysx Ah Hswb

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Nedjw Db Rfopfx Ah Hjwb

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 0-261-20-4583, Edge banding machine BRANDT , Type O KDN 200 Ambition 1200, used, Year of manufacture 2010 Nsdpoh Ak D Ujfx Ah Howb Air pressure 6 bar The power supply voltage 400V – 3 ph - 50 Hz Total power 4 kW Work piece thickness from 0, 3, 4 to -8,50 mm Extraction diameter 3 x 60 working height 950 mm Feed speed/ Sealing side speed: 10m/min Coil cut off max: 0,4 mm -3,0x45 mm noise emission db(A) 84 to 87 Transport/overall dimensions L3.450xW1300xH2180mm Net weight 1200 kg Gluing, End cutting, Top & Bottom trimming, Scraping Price Euro 4900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana