Used Boring Heads for sale (13,107)

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm Ppsdpfx Asyuql Eohvop headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW

Condition: used, Year of construction: 1991, spindle diameter 130 mm x-travel 5000 mm y-travel 3000 mm control Heidenhain TNC 426 taper ISO 50 P.D.B. w-axis 900 mm z-travel 500 mm Pedjyuqlxspfx Ahvspp

Condition: used, spindle diameter 125 mm x-travel 8000 mm y-travel 3000 mm spindle bore 240 mm Ppodoyuqkuepfx Ahvop w-axis 1650 mm total power requirement . kW

Condition: used, spindle diameter 150 mm x-travel 16000 mm y-travel 3000 mm taper ISO 50 w-axis 1200 mm Psdpfx Ahoyuqi Rjvepp spindle speed: 2,5-1000 ram 380x380 mm total power requirement 30 kW

Condition: used, spindle diameter 110 mm x-travel 2000 mm Pjdpfxjyuqhye Ahvjpp y-travel 1500 mm z-travel 1450 mm table surface area 1400 x 1600 mm taper ISO 50 spindle speed: 2 - 2500 Control TOSNUC 7-3 total power requirement 22 kW

Condition: used, spindle diameter 90 mm x-travel 1250 mm Podpsyuqg Njfx Ahvspp y-travel 1120 mm z-travel 1400 mm w-axis 710 mm spindle turning speed range 28 - 1400(x18) U/min tool adaptor MT 5 Table dimensions 1000 x 1120 mm Facing head, 3 axis digital read out, spindle support and tailstock.

Condition: used, spindle diameter 120 mm x-travel 1800 mm y-travel 1300 mm z-travel 1500 mm taper ISO 50 Table dimensions 1120x1400 mm number of spindle speeds 0-1.000 total power requirement 13,2 kW Podpfx Aheyuqgiovepp

Condition: new, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm z-travel 2000 mm w-axis 700 mm table load 10.000 kg Table dimensions 1600x1800 mm Control Fanuc 31iMB voltage 400 V number of spindle speeds 35-3000 U/min taper ISO 50 Tool changer 60 Ppedpfjyuqgcsx Ahvop total power requirement 20/30 kW

Condition: used, table length 1500 mm table width 1500 mm table load 10 t voltage 380 V Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm Psdpfx Ahsyuqf Ejvopp

Condition: used, spindle diameter 90 mm x-travel 1250 mm y-travel 1200 mm Table dimensions 1000 x 1120 mm w-axis 700 mm Psdpfx Ahsyuqfxovepp tool adaptor ISO 40 spindle turning speed range 28 - 1400(x18) U/min z-travel 1600 mm total power requirement 7,5 kW

Condition: used, spindle diameter 125 mm x-travel 2800 mm y-travel 2000 mm z-travel 2500 mm number of spindle speeds 3,55 - 710 (27x) taper ISO 50 Pjdpfjyuqffex Ahvjpp voltage 400 V total power requirement 18,5 kW

Condition: used, spindle diameter 125 mm spindle travel 1130 mm column travel 6000 mm headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V total power requirement 14 kW Pedpfx Ajyuqc Rehvepp Facing head D.R.O.

Condition: good (used), Year of construction: 1987, Control: Siemens 8-M X-axis travel: 10,500 mm Y-axis travel: 5,000 mm Z-axis travel: 1,250 mm W-axis travel: 1,250 mm Ppsdpoyrb I Esfx Ahvsp Spindle diameter: 225 mm Spindle taper: SK 60 with adapter for SK 50 Spindle power: 100 kW Spindle speed: up to 750 rpm Spindle speed multiplier 1:4 = 3,000 rpm Spindle torque: 18,000 Nm Ram cross-section: 460 x 550 mm Feed rate: 4 m/min Rapid traverse X/Y: 5,800 mm/min Rapid traverse Z/W: 4,800 mm/min The machine is supplied without clamping plate and without table.

Condition: used, Used machine Equipment and technical data: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - With drilling beam, drive motor 3 HP, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot pedal - 2 stop rails 1000 mm Ppedoyq T Iuspfx Ahvjp - with undercarriage Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Psdpfewhuu Ejx Ahvspp Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Pjdpfx Aev S Diuehvjpp Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Podpfjgzlq Esx Ahvspp Drilling depth: 150 mm Slot length: 250 mm Height adjustment range: 145 mm Motor power: 1.5 kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Ppodpfx Ahjgq Un Aevep Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min Pedpfx Aoxz Aygohvepp * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Ppjdsyqwxdopfx Ahvsp Weight: 26,000 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 5008 -Pipe size: 1/4 to 1" Pedjyquwqopfx Ahvopp -built-in cutting jaws: 1" -Dimensions: 190/240/H75 mm -Weight: 3.4 kg

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Pedpfx Ael D T D Tshvspp Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: Psdpfx Ahsyqmvxovspp - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, drilling depth: 2,250 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 1,600 mm, table width: 1,300 mm, table load: 20,000 kg, Deep Hole Drilling, Milling and Tapping Machine 5 linear axes X, Y, Y1, Z, W Rotary table axis B Equipped with 3D CAD simulation, WISE PLUS system, electrical cabinet cooling, and fume extraction system. Capacity Gun drilling capacity: 40 mm Table X-axis stroke: 2000 mm Ram Y-axis stroke: 1500 mm Column Z-axis stroke: 700 mm Spindle taper: ISO 50 – DIN 69871 Motor power: 22 / 33 kW Table size: 1600 × 1300 mm Technical Specifications Drilling diameter range: Ø 5 – Ø 40 mm Maximum drilling depth: 2250 mm Milling capacity with cutting tools up to: Ø 60 mm Drilling axis inclination: W -15° / +25° Milling capacity: 400 cm³/min Podpfx Aheyuc Rtjvspp Filtration and cooling system tank capacity: 2000 L Maximum pressure: 80 bar Direct gun drilling with guide bushings: up to Ø 20 mm Rotary table load capacity: 20,000 kg Positioning: 360,000 positions 9 T-slots 18 H12 P=140 Positioning accuracy: ± 0.2 sec Linear Axes X: 2000 mm Y: 1500 mm Z: 700 mm W: 1630 mm

Condition: used, Year of construction: 2018, Tornos CT20-5 Sliding-Head CNC Lathe. S/No. 2470010007 (2018) Country of Origin: Switzerland with Fanuc Series Oi-TD Control, Robobar SBF 326-3.2m Bar Feed, Kraft & Bauer Fire Suppression System, LNS Turbo HB Swarf Conveyor. S/No. 1757000525 (2014) Country of Origin: China, SEI CMC 400J-S2 Oil Filtration Unit. Country of Origin: Italy, Non-Guide Bush Conversion Kit, 4893 Hours Pjdpfjyucmnjx Ahvepp Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice